Anyone know how I would go about getting Avlaon running though Windows 8 and running independently though BFG or CGminer I have a batch 2 model.
Plug a printer type USB cable into the avalon board directly and into your PC. On windows it should come up as an ftdi device. Use zadig to switch it to WinUSB and cgminer should just autodetect and run on it. You may need to unplug and plug the USB cable or reboot for it to be recognised but I didn't need to. Worked fine on win7 for me, I'm assuming 8 will be the same. 
Topic: Avalon ASIC users thread - page 41. (Read 438582 times)
Howcto hard reset? My memory is full so i cant change or delete anything.
Can you power cycle?
Howcto hard reset? My memory is full so i cant change or delete anything.
Anyone know how I would go about getting Avlaon running though Windows 8 and running independently though BFG or CGminer I have a batch 2 model.
Got it sorted but the unit starts at approx 8Gh (instead of 60) then it drops to 0 and restarts
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
Here http://ck.kolivas.org/apps/cgminer/avalon/ but I don't think that is your problem.
[fan1] => 4200
[temp2] => 85
Looks like it's shutting down on high temp, is the fan actually running and is the air flow path through the unit clear?
Changed Fan temp to 70 & cut off 90 and it is now working like a dream.
Thanks everyone who helped.
Got it sorted but the unit starts at approx 8Gh (instead of 60) then it drops to 0 and restarts
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
Here http://ck.kolivas.org/apps/cgminer/avalon/ but I don't think that is your problem.
[fan1] => 4200
[temp2] => 85
Looks like it's shutting down on high temp, is the fan actually running and is the air flow path through the unit clear?
Got it sorted but the unit starts at approx 8Gh (instead of 60) then it drops to 0 and restarts
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Here is log when running
[/code]
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
API Log
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Socket connect failed: Connection refused
Here is log when running
Code:
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Reply was 'STATUS=S,When=1386963617,Code=70,Msg=CGMiner stats,Description=cgminer 3.4.0|STATS=0,ID=AVA0,Elapsed=125,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=24,asic_count=10,timeout=36,frequency=350,fan1=4200,fan2=0,fan3=0,temp1=20,temp2=85,temp3=20,temp_max=85,Device Hardware%=2.9412,no_matching_work=0,match_work_count1=2,match_work_count2=3,match_work_count3=2,match_work_count4=0,match_work_count5=3,match_work_count6=2,match_work_count7=3,match_work_count8=1,match_work_count9=2,match_work_count10=3,match_work_count11=3,match_work_count12=1,match_work_count13=2,match_work_count14=2,match_work_count15=3,match_work_count16=1,match_work_count17=0,match_work_count18=0,match_work_count19=0,match_work_count20=0,match_work_count21=0,match_work_count22=0,match_work_count23=0,match_work_count24=0,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=12122 0|STATS=1,ID=POOL0,Elapsed=125,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=3.00000000,Min Diff=3.00000000,Max Diff=3.00000000,Min Diff Count=2483,Max Diff Count=2483,Times Sent=11,Bytes Sent=1302,Times Recv=17,Bytes Recv=46765,Net Bytes Sent=2095,Net Bytes Recv=46765|'
[STATUS] =>
(
[STATUS] => S
[When] => 1386963617
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 3.4.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 125
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 24
[asic_count] => 10
[timeout] => 36
[frequency] => 350
[fan1] => 4200
[fan2] => 0
[fan3] => 0
[temp1] => 20
[temp2] => 85
[temp3] => 20
[temp_max] => 85
[Device Hardware%] => 2.9412
[no_matching_work] => 0
[match_work_count1] => 2
[match_work_count2] => 3
[match_work_count3] => 2
[match_work_count4] => 0
[match_work_count5] => 3
[match_work_count6] => 2
[match_work_count7] => 3
[match_work_count8] => 1
[match_work_count9] => 2
[match_work_count10] => 3
[match_work_count11] => 3
[match_work_count12] => 1
[match_work_count13] => 2
[match_work_count14] => 2
[match_work_count15] => 3
[match_work_count16] => 1
[match_work_count17] => 0
[match_work_count18] => 0
[match_work_count19] => 0
[match_work_count20] => 0
[match_work_count21] => 0
[match_work_count22] => 0
[match_work_count23] => 0
[match_work_count24] => 0
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 12122 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 125
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 3.00000000
[Min Diff] => 3.00000000
[Max Diff] => 3.00000000
[Min Diff Count] => 2483
[Max Diff Count] => 2483
[Times Sent] => 11
[Bytes Sent] => 1302
[Times Recv] => 17
[Bytes Recv] => 46765
[Net Bytes Sent] => 2095
[Net Bytes Recv] => 46765
)
Anyone know where I can get the latest firmware update please, been told I am running on wrong one 20130821.
Thanks
Thanks guys I got it hashing connected directly to cgminer on a linux laptop. I didn't remove the jumper from the FPGA. Its nice to know these things are easy to run without TP-LINK TL-WR703N.
With the jumper installed you are supplying power to both ends of the usb cable afaik and according to the schematic.
Not healthy for the controller or the laptop. You might want to check for hot spots on the controller.
Is it running ok on 3.8.5?
I haven't tried that version yet and my batch 3 choked on 3.8.4.
I'm running 3.8.3 right now which has given me the best results so far.
Thanks. I removed the jumper and the usb port is now running 10 degrees cooler. 3.8.5 is running fine.
Anyone know how to reset Avalon Mini 60Gh when there is no access to the web interface.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
And no joy.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
Quote
You need to set your computer IP address to 192.168.0.1, subnet 255.255.255.0 and leave everything else blank. Then apply the settings, and make sure your computer and the Avalon are plugged into the same network and then open up IE or Chrome and go to 192.168.0.100 or http://192.168.0.100/ and you should be able to log into your Avalon.
And no joy.
There may be a pin hole near the LAN socket. When you are powering up the device, you can depress the switch inside this pin hole. For more instructions about timing and the resulting IP address, Google for OpenWRT fail safe.
Many thanks, is there any info on how to set a static ip as the ip on our router is 192.168.1.1 so need to set static so I can connect it to that network
Anyone know how to reset Avalon Mini 60Gh when there is no access to the web interface.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
And no joy.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
Quote
You need to set your computer IP address to 192.168.0.1, subnet 255.255.255.0 and leave everything else blank. Then apply the settings, and make sure your computer and the Avalon are plugged into the same network and then open up IE or Chrome and go to 192.168.0.100 or http://192.168.0.100/ and you should be able to log into your Avalon.
And no joy.
There may be a pin hole near the LAN socket. When you are powering up the device, you can depress the switch inside this pin hole. For more instructions about timing and the resulting IP address, Google for OpenWRT fail safe.
Many thanks, is there any info on how to set a static ip as the ip on our router is 192.168.1.1 so need to set static so I can connect it to that network
I view the fail-safe as an emergency backup that may require other non-standard accommodation. All the instructions are written from the viewpoint that you have a "laptop." Do the next question is, do you have a virtual machine running linux or an actual laptop? You will need to connect directly between the laptop and the tp-link.
Anyone know how to reset Avalon Mini 60Gh when there is no access to the web interface.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
And no joy.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
Quote
You need to set your computer IP address to 192.168.0.1, subnet 255.255.255.0 and leave everything else blank. Then apply the settings, and make sure your computer and the Avalon are plugged into the same network and then open up IE or Chrome and go to 192.168.0.100 or http://192.168.0.100/ and you should be able to log into your Avalon.
And no joy.
There may be a pin hole near the LAN socket. When you are powering up the device, you can depress the switch inside this pin hole. For more instructions about timing and the resulting IP address, Google for OpenWRT fail safe.
Many thanks, is there any info on how to set a static ip as the ip on our router is 192.168.1.1 so need to set static so I can connect it to that network
Anyone know how to reset Avalon Mini 60Gh when there is no access to the web interface.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
And no joy.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
Quote
You need to set your computer IP address to 192.168.0.1, subnet 255.255.255.0 and leave everything else blank. Then apply the settings, and make sure your computer and the Avalon are plugged into the same network and then open up IE or Chrome and go to 192.168.0.100 or http://192.168.0.100/ and you should be able to log into your Avalon.
And no joy.
There may be a pin hole near the LAN socket. When you are powering up the device, you can depress the switch inside this pin hole. For more instructions about timing and the resulting IP address, Google for OpenWRT fail safe.
Anyone know how to reset Avalon Mini 60Gh when there is no access to the web interface.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
And no joy.
I have set it up with a ethernet cross over but still nothing on 192.168.0.100 or 192.168.0.101
Already Done this
Quote
You need to set your computer IP address to 192.168.0.1, subnet 255.255.255.0 and leave everything else blank. Then apply the settings, and make sure your computer and the Avalon are plugged into the same network and then open up IE or Chrome and go to 192.168.0.100 or http://192.168.0.100/ and you should be able to log into your Avalon.
And no joy.
running cgiminer version: 3.3.1-1
Stop using an ancient cgminer? i use slush's pool and i don't think there is a status down notification option there, but correct me if i'm wrong. the only way i know is literally by trying to connect to the gui remotely or walking into my office and seeing that yellow light which indicates that it's not mining.
Use the GUI (web interface):
Status -> Cgminer API Log
Code:
[Firmware Version] => 20130821
cgminer-70bc62c
luci-d854edc+
cgminer-openwrt-packages-800cc58
Reply was 'STATUS=S,When=1386912144,Code=70,Msg=CGMiner stats,Description=cgminer 3.4.0|STATS=0,ID=AVA0,Elapsed=222373,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=24,asic_count=10,timeout=33,frequency=378,fan1=0,fan2=3360,fan3=3360,temp1=18,temp2=-1,temp3=39,temp_max=46,Device Hardware%=2.1790,no_matching_work=18783,match_work_count1=192589,match_work_count2=193117,match_work_count3=193468,match_work_count4=193578,match_work_count5=192824,match_work_count6=193787,match_work_count7=192508,match_work_count8=193177,match_work_count9=192971,match_work_count10=192474,match_work_count11=192101,match_work_count12=193837,match_work_count13=192385,match_work_count14=192772,match_work_count15=193071,match_work_count16=193013,match_work_count17=193155,match_work_count18=192878,match_work_count19=193032,match_work_count20=192586,match_work_count21=193136,match_work_count22=193878,match_work_count23=192415,match_work_count24=193948,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=30621698 50=1/104/104/86/18 100=2/126/134/224/36 500=0/0/0/0/0 |STATS=1,ID=POOL0,Elapsed=222373,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=64.00000000,Min Diff=64.00000000,Max Diff=64.00000000,Min Diff Count=4650741,Max Diff Count=4650741,Times Sent=70966,Bytes Sent=8479356,Times Recv=79040,Bytes Recv=11930165,Net Bytes Sent=8480075,Net Bytes Recv=11930165|STATS=2,ID=POOL1,Elapsed=222373,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=744,Pool Attempts=744,Pool Wait=153.262791,Pool Max=0.619165,Pool Min=0.161109,Pool Av=0.212781,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=4.00000000,Min Diff=4.00000000,Max Diff=4.00000000,Min Diff Count=748,Max Diff Count=748,Times Sent=990,Bytes Sent=106480,Times Recv=990,Bytes Recv=415338,Net Bytes Sent=408109,Net Bytes Recv=645429|'
[STATUS] =>
(
[STATUS] => S
[When] => 1386912144
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 3.4.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 222373
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 24
[asic_count] => 10
[timeout] => 33
[frequency] => 378
[fan1] => 0
[fan2] => 3360
[fan3] => 3360
[temp1] => 18
[temp2] => -1
[temp3] => 39
[temp_max] => 46
[Device Hardware%] => 2.1790
[no_matching_work] => 18783
[match_work_count1] => 192589
[match_work_count2] => 193117
[match_work_count3] => 193468
[match_work_count4] => 193578
[match_work_count5] => 192824
[match_work_count6] => 193787
[match_work_count7] => 192508
[match_work_count8] => 193177
[match_work_count9] => 192971
hey guys,
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
when it goes offline, I guess the pool notifies you?
When you log in, what does the Stats tab tell you about the system status? What is happening on the machine?
i use slush's pool and i don't think there is a status down notification option there, but correct me if i'm wrong. the only way i know is literally by trying to connect to the gui remotely or walking into my office and seeing that yellow light which indicates that it's not mining.
as far as system state, when i look at the logs i see this:
Thu Dec 12 23:16:43 2013 daemon.error netifd: lan (656): Sending renew...
Thu Dec 12 23:16:44 2013 daemon.error netifd: lan (656): Lease of 192.168.0.98 obtained, lease time 3600
Thu Dec 12 23:18:01 2013 news.info crond[842]: crond: USER root pid 21633 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:20:01 2013 news.info crond[842]: crond: USER root pid 21784 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:22:01 2013 news.info crond[842]: crond: USER root pid 21935 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:24:01 2013 news.info crond[842]: crond: USER root pid 22086 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:26:01 2013 news.info crond[842]: crond: USER root pid 22237 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:28:01 2013 news.info crond[842]: crond: USER root pid 22386 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:30:01 2013 news.info crond[842]: crond: USER root pid 22537 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:32:01 2013 news.info crond[842]: crond: USER root pid 22688 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:34:01 2013 news.info crond[842]: crond: USER root pid 22839 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:36:01 2013 news.info crond[842]: crond: USER root pid 22990 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:38:01 2013 news.info crond[842]: crond: USER root pid 23141 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:40:01 2013 news.info crond[842]: crond: USER root pid 23380 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:42:01 2013 news.info crond[842]: crond: USER root pid 23531 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:44:01 2013 news.info crond[842]: crond: USER root pid 23682 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:46:01 2013 news.info crond[842]: crond: USER root pid 23833 cmd /usr/bin/cgminer-monitor
Thu Dec 12 23:46:44 2013 daemon.error netifd: lan (656): Sending renew...
Thu Dec 12 23:46:45 2013 daemon.error netifd: lan (656): Lease of 192.168.0.98 obtained, lease time 3600
that's from the syslog, but i'm not sure where else i should be looking? if the machine was overheating, the entire thing would shut down right? in this scenario, the machine is still always on and running, just not connected and mining.
hey guys,
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
when it goes offline, I guess the pool notifies you?
When you log in, what does the Stats tab tell you about the system status? What is happening on the machine?
I did reboot and things were ok for about 10 min then it moved back up to ~4%
Oh well, doesn't seem to be reporting anything weird on my pool hash rate..
Guess i'll try to ignore it.
Oh well, doesn't seem to be reporting anything weird on my pool hash rate..
Guess i'll try to ignore it.
Here is a view of the stats on BTC guild of 3 machines where some of them flip flop (even if they are not in the same building)
after a while I got tired of chasing down when it happened and let the systems correct by themselves. Sometimes the cgminer process restarts, sometimes I reboot the machines.
hey guys,
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
i have a dedicated business dsl connection (ethernet) plugged into my avalon miner (batch 3 110 Gh/s), but at least 3-4 times a day it goes offline (yellow light) and i have to manually power off and on each time to get it back online.
running cgiminer version: 3.3.1-1
Firmware Version OpenWrt Barrier Breaker r37008 / LuCI Trunk (svn-r9844)
Kernel Version 3.8.13
any ideas at all?
Hi all,
I have a 4 module avalon. I am wondering, for about 2 months I have run -auto with absolute success.
I haven't had more than a 1/2 hour of downtime due to power outage.
Now the miner is reporting DH 5.41%
I have a 4 module avalon. I am wondering, for about 2 months I have run -auto with absolute success.
I haven't had more than a 1/2 hour of downtime due to power outage.
Now the miner is reporting DH 5.41%
it happens sometimes. I have a few systems that shoot up to 20% or worse hardware errors. They are flawless otherwize
Just do a software reboot of the machine and it usually fixes it. In the worst case, just power it down
and boot it up after 20 seconds
I did reboot and things were ok for about 10 min then it moved back up to ~4%
Oh well, doesn't seem to be reporting anything weird on my pool hash rate..
Guess i'll try to ignore it.
Thanks!
Jump to: