New SRBMiner : https://bitcointalksearch.org/topic/srbminer-multi-gpu-cpu-miner-094-5190081
for intergration
I will look into this one. Hopefully it's similar to the current SrbMiner. for intergration
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 134. (Read 703547 times)
October 06, 2019, 11:41:23 AM
October 05, 2019, 03:39:11 PM
AW not show RPM for RTX2080 TI cards. Tested on Palit and ASUS
October 05, 2019, 10:09:01 AM
@Patrike I have MicroBT Whatsminer M20S problem - when i try to change pools or restart miner it doesnt react. API access is privileged, ssh unlocked. AM is trying to remove pools and change to selected but fails to do so.
October 05, 2019, 09:15:26 AM
hello patrike,
I want to suggest adding an option, that would allow to configure and use two profit switching intervals together, but with different switch thresholds.
the idea is..
then with default profit switching interval Awesome Miner won't switch from pool to pool too often, and miners will have enough time for their hashrate to be counted by pool.
but..
what do you think about this?
thanks
I want to suggest adding an option, that would allow to configure and use two profit switching intervals together, but with different switch thresholds.
the idea is..
- - to have a big default/normal switching interval (60+ minutes), with a low switching threshold (2..3 %) or without a threshold at all
- - to have a second (very) short switching interval (2..5 minutes for example), that will force the profit switch when profitability difference between the current pool and new best profit pool is high (15..20+ %),
then with default profit switching interval Awesome Miner won't switch from pool to pool too often, and miners will have enough time for their hashrate to be counted by pool.
but..
- - if the some pool profitability spikes and becomes at least 15..20% higher than current - it will take max 2..5 minutes (small interval duration) to perform the switch;
- - similarly, it would allow to quickly leave the current pool, if its profitability has suddenly dropped because of diff increase, etc..
what do you think about this?
thanks
October 05, 2019, 03:39:50 AM
Hi @patrike
Can you add a button to a GPU miner object like a "Ignore overclocking settings from profit profile"
That will be a very helpful if some GPU work wrong and must be maintained.
If i can central switch off a settings for a miner, I no need to change overclocking settings for each algo in profit profile.
Regards
Can you add a button to a GPU miner object like a "Ignore overclocking settings from profit profile"
That will be a very helpful if some GPU work wrong and must be maintained.
If i can central switch off a settings for a miner, I no need to change overclocking settings for each algo in profit profile.
Regards
October 04, 2019, 11:58:06 AM
New SRBMiner : https://bitcointalksearch.org/topic/srbminer-multi-gpu-cpu-miner-094-5190081
for intergration
for intergration
October 04, 2019, 07:11:04 AM
still need propper support for xmrrig cpu miner, basicaly a new tab that shows cpus and their
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
The last part of the first line in your post was missing. Is it better CPU temperature display you are looking for? Today those are only displayed on the System tab if the Remote Agent is running as Admin. Was it on the CPU tab you wanted additional information?im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
Please let me know the details of your request and I will of course look into if it can be supported and improved. Please also let me know if it's some specific command line feature missing that forces you to start the mining outside of Awesome Miner. Thanks!
-we need a separate tab like gpus and asics have that lets you see what cpu rigs are added as profit miners, hash rate pool display temps acceppted etc just like how gpus and asic are handled, basically tread the cpu miner like
how you treeat an asic or gpu rig
https://whattomine.com/coins/249.json
Now Loki will show up with the RandomXL algorithm.
The next issue here is that Loki requires an Exponental Factor of 0 instead of 32 to display the profit information correctly. I will make this adjustment in the next release. It can also be configured for the Loki coin on the Coins tab, where the Properties dialog for Loki will allow you to set the Exponental Factor to 0.
Thanks for the suggestions as well. In the miner list a Managed Miner or Managed Profit Miner based on CPU mining software like XmRig or CpuMiner-Opt is displayed very similar to how a GPU miner is displayed. There are already a separate tab for CPU's at the bottom of the screen, but it's not as detailed as for GPU/ASIC miners. Missing temperature display is one limitation for example and would be something that should be improved. Just like for GPU mining, all mining software doesn't support reporting accepted/rejected shares per device - only as a total number.
thanks for looking in to this, im trying to build up a cpu farm , upgrading all the cpus on my 25 rigs to mine randomx so a tab for cpus would be far more easy to manage , watch the details and start/stop them , switch coins or pools similar to asics and gpus. Ill play around thought and see what i can get out of the current client
October 04, 2019, 07:04:13 AM
Awesome Miner version 7.0.6
Awesome Miner Antminer firmware
- Firmware log file can be cleared via Awesome Miner
- Added configuration of SSH and mining fee region via the Mining Profile configuration (toolbar: Tools -> ASIC Tools)
- Display mining fee information in the Update Firmware dialog
Features
- Define color for coins on the Coins tab (via the context menu)
Configuration
- Make it configurable if passwords should be displayed in plain text
User interface
- Show number of selected miners in the Bulk Edit dialog for miners
- Bulk Edit dialog for External Miners will show current settings for SSH and web related settings
Integration
- Loki coin calculations supported
Mining software
- XmRig CPU miner 4.2.1 beta
- CpuMiner 3.9.8.1
- CryptoDredge 0.22.0
- Nanominer 1.6
Corrections
- Correction to the defined order of custom pools for the profit switcher
- Correction to XmRig API processing
Awesome Miner Antminer firmware
- Firmware log file can be cleared via Awesome Miner
- Added configuration of SSH and mining fee region via the Mining Profile configuration (toolbar: Tools -> ASIC Tools)
- Display mining fee information in the Update Firmware dialog
Features
- Define color for coins on the Coins tab (via the context menu)
Configuration
- Make it configurable if passwords should be displayed in plain text
User interface
- Show number of selected miners in the Bulk Edit dialog for miners
- Bulk Edit dialog for External Miners will show current settings for SSH and web related settings
Integration
- Loki coin calculations supported
Mining software
- XmRig CPU miner 4.2.1 beta
- CpuMiner 3.9.8.1
- CryptoDredge 0.22.0
- Nanominer 1.6
Corrections
- Correction to the defined order of custom pools for the profit switcher
- Correction to XmRig API processing
October 04, 2019, 04:41:00 AM
still need propper support for xmrrig cpu miner, basicaly a new tab that shows cpus and their
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
The last part of the first line in your post was missing. Is it better CPU temperature display you are looking for? Today those are only displayed on the System tab if the Remote Agent is running as Admin. Was it on the CPU tab you wanted additional information?im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
Please let me know the details of your request and I will of course look into if it can be supported and improved. Please also let me know if it's some specific command line feature missing that forces you to start the mining outside of Awesome Miner. Thanks!
-we need a separate tab like gpus and asics have that lets you see what cpu rigs are added as profit miners, hash rate pool display temps acceppted etc just like how gpus and asic are handled, basically tread the cpu miner like
how you treeat an asic or gpu rig
https://whattomine.com/coins/249.json
Now Loki will show up with the RandomXL algorithm.
The next issue here is that Loki requires an Exponental Factor of 0 instead of 32 to display the profit information correctly. I will make this adjustment in the next release. It can also be configured for the Loki coin on the Coins tab, where the Properties dialog for Loki will allow you to set the Exponental Factor to 0.
Thanks for the suggestions as well. In the miner list a Managed Miner or Managed Profit Miner based on CPU mining software like XmRig or CpuMiner-Opt is displayed very similar to how a GPU miner is displayed. There are already a separate tab for CPU's at the bottom of the screen, but it's not as detailed as for GPU/ASIC miners. Missing temperature display is one limitation for example and would be something that should be improved. Just like for GPU mining, all mining software doesn't support reporting accepted/rejected shares per device - only as a total number.
October 03, 2019, 11:36:22 AM
still need propper support for xmrrig cpu miner, basicaly a new tab that shows cpus and their
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
The last part of the first line in your post was missing. Is it better CPU temperature display you are looking for? Today those are only displayed on the System tab if the Remote Agent is running as Admin. Was it on the CPU tab you wanted additional information?im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
Please let me know the details of your request and I will of course look into if it can be supported and improved. Please also let me know if it's some specific command line feature missing that forces you to start the mining outside of Awesome Miner. Thanks!
-we need a separate tab like gpus and asics have that lets you see what cpu rigs are added as profit miners, hash rate pool display temps acceppted etc just like how gpus and asic are handled, basically tread the cpu miner like
how you treeat an asic or gpu rig
October 03, 2019, 10:49:01 AM
Please go to the Options dialog, Mining settings, where you will find "Restart attempts on process crash". If you increase this number significantly, Awesome Miner will not only restart the mining software a few times if terminated/crashed, but also continue to keep restarting it.
Your savior thanks. I was looking for this settings where I can increase or extend the miner restart attempts. Let me test it once my miner becomes unstable again.
I recently reported my internet on our internet provider due to unstable connection but it seems they already fix my internet issue.
October 03, 2019, 07:23:52 AM
How do i execute a command b4 OC is applied?
Today the overclocking is applied first, then "Execute additional commands before starting the mining software" and finally the mining software is started. This order cannot be changed.Can you please let me know the scenario where the commands must be executed first and I can look into it in more detail? Thanks!
DMed you the details
October 03, 2019, 07:05:05 AM
How do i execute a command b4 OC is applied?
Today the overclocking is applied first, then "Execute additional commands before starting the mining software" and finally the mining software is started. This order cannot be changed.Can you please let me know the scenario where the commands must be executed first and I can look into it in more detail? Thanks!
October 03, 2019, 07:02:12 AM
When the Internet connection is down, no mining will happen. However, it should recover as soon as the connection is back.
What happens today when the Internet connection goes down - isn't the mining software trying to reestablish to pool connection automatically? If the mining software closes down - Awesome Miner will automatically start it again.
What happens today when the Internet connection goes down - isn't the mining software trying to reestablish to pool connection automatically? If the mining software closes down - Awesome Miner will automatically start it again.
It reconnects the miner if the internet connection goes down in a few minutes but if the internet took longer to reconnect the miner stop.
How can I increase/extend the reconnecting process on awesomeminer? I'm currently using gminer and this is the only miner that I experienced to stop miner every time the internet connection goes down but on the different miners, it is not happening even the connection takes too long to reconnect.
October 03, 2019, 07:00:07 AM
still need propper support for xmrrig cpu miner, basicaly a new tab that shows cpus and their
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
The last part of the first line in your post was missing. Is it better CPU temperature display you are looking for? Today those are only displayed on the System tab if the Remote Agent is running as Admin. Was it on the CPU tab you wanted additional information?im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
Please let me know the details of your request and I will of course look into if it can be supported and improved. Please also let me know if it's some specific command line feature missing that forces you to start the mining outside of Awesome Miner. Thanks!
October 02, 2019, 10:02:42 PM
How do i execute a command b4 OC is applied?
October 02, 2019, 06:36:37 PM
When the Internet connection is down, no mining will happen. However, it should recover as soon as the connection is back.
What happens today when the Internet connection goes down - isn't the mining software trying to reestablish to pool connection automatically? If the mining software closes down - Awesome Miner will automatically start it again.
What happens today when the Internet connection goes down - isn't the mining software trying to reestablish to pool connection automatically? If the mining software closes down - Awesome Miner will automatically start it again.
It reconnects the miner if the internet connection goes down in a few minutes but if the internet took longer to reconnect the miner stop.
How can I increase/extend the reconnecting process on awesomeminer? I'm currently using gminer and this is the only miner that I experienced to stop miner every time the internet connection goes down but on the different miners, it is not happening even the connection takes too long to reconnect.
October 02, 2019, 11:53:10 AM
still need propper support for xmrrig cpu miner, basicaly a new tab that shows cpus and their
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
im still running ny cpus on loki outside of the app. Randomx is going to be really big but you guys are really behind on your cpu mining bits
October 02, 2019, 10:19:52 AM
Habe the latest issues been fixed already? I heard the miner runs unstable since the last update...
Hi. Is this a question related to the post above about the new CryptoDredge version?In case you need to go back to an earlier version of a specific mining software, please go to the Options dialog, Managed Software section, where you can configure which version to use for each mining software.
October 02, 2019, 10:17:52 AM
CryptoDredge v0.22.0 released
* New X16RV2 algorithm
* Fix Stratum issue related to 'resource deadlock would occur'
* Fix ccminer API on Linux
* Other minor fixes
Download: https://cryptodredge.org/get/
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.22.0
Thanks - I've just pushed an update for this. Please use the feature Update Mining Software Definitions to get the latest version. * New X16RV2 algorithm
* Fix Stratum issue related to 'resource deadlock would occur'
* Fix ccminer API on Linux
* Other minor fixes
Download: https://cryptodredge.org/get/
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.22.0
Jump to: