Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 180. (Read 703563 times)

Thank you very much for the detailed explanation.

Can anyone help me out?
Some of my miners have restricted api access and others have privileged. I've followed these instructions "Awesome Miner will automatically configure the Managed Miners to use Privileged mode by default. These settings can be changed from the Advanced section of the miner properties in the Awesome Miner Options dialog." But I can't see where to change it?

Thanks for the suggestion. There will be some additional properties added to the native overclocking feature over the next few weeks so I will try to include this one as well.

When I open https://explorer.ravencoin.world/api/getdifficulty in a web browser I do see the Cloud Flare protection page the first time I launch it. It basically indicates that they only allows web browser that can solve a Javascript challenge are allowed to move on to the actual page. Cloud Flare protected sites cannot be accessed as an API from applications like Awesome Miner that only load data without being a complete web browser.

There might be some solution to this, but not an easy one that I get in place right away.

Do you get the same issue even if you uncheck "Change properties" for this coin, to only use default values?

Can you please check that you don't have any pool for this coin where you have set the Profit Factor to 0 for the pool. As you remember, this will affect the revenue of the coin if you have enabled "Apply pool profit factor in the Coins tab" in the Options dialog, Statistics Settings.

Thanks for the update. These two miners have quite different efficiency you noticed. For this reason, the linear power usage scaling in the Profit Profile will not make good predictions.

Please go to the Options dialog, Profit Profile section and add a new profile for the Z11 miners. In this profile you can enter a typical hashrate and power usage for the Z11 in the same way to did in your previous profile for the Z9 miner. Finally you can open the Properties of your External Miners representing the Z11 miners and select the new profit profile you created.

First a general answer. The formula for calculating coins per day using Difficulty-Reward-ExpFactor works for almost all coins and the formula using NetHash works for many coins as well. There will however always be coins with some unique properties where either one or none of these formulas can predict the number of coins per day. That's not an indication that the formulas are wrong, just that they may not be usable in a few cases.

Coins based on CuckaRoo29 / CuckaToo31 / CuckooCycle coins are examples where you never will get any correct values out of the formulas.

I just wanted to highlight this in general as I assume you will play around with quite a number of coins to do these calculations, and eventually you will find coins where they do something unique and the numbers will look strange.

In this case I entered the sources of information as you did, and from what I can see the Difficulty and NetHash forumula gives almost the same result. It was only 1 - 2 percent difference between them. However, in my case I used Block Time 60 seconds (1 minute) as this is what both CoinCalculators.io and CoinToMine reports. If you entered Block Time 150 seconds, it probably explain the difference you got.

@patrike please implement memory voltage in awesome miner overclocking.
On AMD cards the core voltage is a combination of cvddc + mvddc, if you do not set both at the same value core clock voltage is not applied correctly

Images are on imgur

https://imgur.com/a/vFggb6l

There is a mistake, and it will be corrected PAtrike as soon as possible. But for this specific problem of RVN I have given you the solution. I also have a problem that I have reported. Just wait, the insurance that reads your post and review the problem. Just give it time.

Thank you friend.

But sites where in the title are three words
I have more.

try     https://ravencoin.network/api/status?q=getDifficulty       Json    proof-of-work

Hello, Patricke.

I noticed that when creating an API request for determining complexity, etc., the response does not recognize the name of the site of three words.

For example, https://explorer.ravencoin.world/api/getdifficulty.

https://www.dropbox.com/s/397zu7whoj1s93u/Captura%20de%20pantalla%202019-04-20%20a%20las%2015.46.06.png?dl=0

This is happening to me in several currencies, both with supplier data and with personalized data, that remain at 0 of profit. I have tried many times already, and it is not just one currency they are several. You will see that all the data is added, it is impossible that with all the data the profit is 0 and I have measured the AL-GO to have reference

We also use the getnetworkhashps command a lot to get nethash but it depends on which currency, it gives us errors, the data is good on the form, but then the coin drops a lot, if I put it with the exponential formula which does not require this data , go back up But something is failing, as Moppidoo commented, he uses getinfo that we are not used to. I hope you have an easy solution because it is a small stone in the road.

Thankyou...work now fine !

the current custom setting in the algorithm section for my Z9 minis is 10k/s @ 268w. When I added my Z11s they were showing 135k/s @ 4000w on the Main->Miners tab.

@PArike I send you a small problem or discrepancy, it's very strange.

Currency PHL using your exponential formula gives a more or less close value, but it is dominated by auto exchanges and it does not work for me, but good. But when I choose the complete formula, I mean nethash, blocktime, reward ...... The result changes an awful lot to worse. I have checked the data several times, can not give a result that is 1/3 of the result with the exponential formula. To see if something is wrong, I think the blocking time may be wrong in the formula, or it is simply something else. I leave you the full currency data so you can configure it.

PHL  X16r  block reward 2.5    Blocktime  150 seconds

Difficulty
http://explore.placeh.io:8080/ext/summary     token json  data.[0].difficulty

Price

https://api.crex24.com/v2/public/tickers?instrument=PHL-BTC      token json  [?(@.instrument=='PHL-BTC')].bid

Nethash 

http://explore.placeh.io:8080/api/getnetworkhashps


With the exponential formula in the same machine 0.0014 6x 1080ti, with the complete formula 0.0058 the difference is huge, I do not understand it, it should not be like that, something fails.

I have done the measurement with exponential and the correct profit would be 1.25 but only when the auto exchanges (zpool, zergpool etc ...) do not give war.

It's not a coin I'm going to use, but this huge difference has caught my attention that something is not right. The formula with all the data can not be so far away. Somehow I do not trust the blocktime that is 150 seconds 2.5 minutes, but it is not a non-metric value.

I await your conclusions.

I get cancelling will stop future and although I can use cloud services for monitoring that is 100% useless to me, monitoring without the ability to interact with the miners is pointless. But I paid for a full year for it to do exactly what it can no longer do.

I again understand this is a bitmain issue and I have sent an email almost daily (hoping to bug the shit out of them) so maybe that one day in the future it will be a non-issue and I can use the software again.

as for reverting the control board firmware, I will read that and see if it something I can do.

CryptoNight Conceal is not yet included in Awesome Miner by default. I will add it to the next release and also enable it for SrbMiner.

You can also add algorithms manually:
https://support.awesomeminer.com/support/solutions/articles/35000086025-add-a-new-algorithm

Very good initiative!

Can you please describe this request/question in a bit more detail? I understand that you are about to add your new Antminers, but what are the configuration or operation you want to do here?