Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 187. (Read 703146 times)

Hello Patrice
By mining history

if you select statistics for 7 days or more, incorrect data is obtained!
that is, if one rig worked for a week then everything correctly displays 98-100 percent in the mining half.
And the second ring was added just a couple of days ago - in the statistics of mining time will be the same indicators for the week!

I had only enabled Miniz with the algorithms Equihash96,5, Equihash144,5 EquihashZero (192,7). One that should be added to this list in Awesome Miner would be ZHash, which is some variation of Equihash 144,5 that also should be supported by Miniz.

In your case the Profit Switcher didn't think Miniz could handle ZHash. You can go to the Options dialog, Managed Software add enable ZHash for Miniz and specify the argument "144,5". The next release of Awesome Miner will do that by default.

Thanks for your feedback!

I have a problem with Miniz, I have activated it before using it in the rig. Then I went to Zhash and I changed Gminer for Miniz, but it does not start, it's more, I think it tries to start Bminer.

I have not changed anything in the pool, it is assumed that if the pool is fine for Gminer, it should be fine for Miniz. I leave the log here, and I continue with Gminer.



Initialize diagnostics (20)
Starting Diagnostics. Awesome Miner Remote Agent version: 6.2.12
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 418.96
nVidia OpenCL Platform ID: 0
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: BMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Set clocking start profile: 135, RTX 70 +100 +600 (when stopping, the following will be used: -1, type: Single, Use: False)
Properties: (WindowMode: ConsoleFormat, EngineType: BMiner, IsProfitMiner: True)
====================================================================================================
C:\Users\truco\AppData\Roaming\AwesomeMinerService\bminer-v15.4.0-9e272fc-amd64_1\bminer-v15.4.0-9e272fc\bminer.exe  --pass minpayout=625 --pers BitcoinZ -uri stratum://[email protected]:2020 -watchdog=false -api=0.0.0.0:4028
====================================================================================================
Mining Engine Process started, PID: 6796
> Bminer: When Crypto-mining Made Fast (v15.4.0-9e272fc)
>
> flag provided but not defined: -pass
>   -api :
>        The endpoint (i.e., :) that bminer serves its REST API. The REST API is disabled if it is unspecified.
>   -devices GPUs
>        List of GPUs that Bminer should run on. By default bminer runs on all GPUs available on the system.
>   -dual-intensity int
>        The intensity of the secondary mining. Valid values are 0 to 300. Default is 0, which is to tune automatically.
>   -dual-subsolver int
>        The sub-solver for dual mining. Valid values are 0, 1, 2, 3. Default is -1, which is to tune automatically. (default -1)
>   -failover sameHost|immediateNext|random
>        Fail-over strategy between multiple pools. Bminer can retry the connection, failover to the next pool or a pool that is randomly chosen in the lists of available pools. (sameHost|immediateNext|random) (default "immediateNext")
>   -fast
>        Enable agressive optimizations. Bminer is more performant under this setting but it might be unstable on some OS/drivers
>   -gpucheck uint
>        The interval in seconds that Bminer polls whether the GPUs have hung. Set to 0 to disable the checks. (default 90)
>   -intensity int
>        The intensity of the CPU for grin/AE mining. Valid values are 0 to 12. Default is 6. Higher intensity may give better performance but more CPU usage. (default -1)
>   -logfile
>        Append the logs to the file .
>   -max-network-failures int
>        Number of consecutive attempts that Bminer tries to recover from network failures. Set to -1 to keep on recovering. (default -1)
>   -max-temperature int
>        Hard limits of the temperature of the GPUs. Bminer slows down itself when the temperautres of the devices exceed the limit. (default 85)
>   -no-runtime-info
>        Disable runtime information collection for Bminer.
>   -no-timestamps
>        Suppress timestamps in the logging messages.
>   -nofee
>        Disable the devfee but it also disables some optimizations.
>   -pers string
>        Personalization string for equihash 144,5 based coins. Default: BgoldPoW. Valid values include BitcoinZ, Safecoin, ZelProof, etc. (default "BgoldPoW")
>   -share-check uint
>        The interval of seconds that Bminer polls to ensure there are accepted shares. Set to 0 to disable the checks. (default 900)
>   -strict-secure
>        Verify the certificates of servers when connecting to a SSL-enabled Stratum server.
>   -uri ://[:]@:
>        A comma-seperated list of URIs that bminer should mine towards. It has the format of ://[:]@:. Please refer to https://www.bminer.me for the specification of the URIs.
>   -uri2 ://[:]@:
>        A comma-seperated list of URIs that bminer should mine towards secondarily. It has the format of ://[:]@:. Currently Bminer supports blake14r:// or blake2s:// as secondary for ETH mining. Please refer to https://www.bminer.me for the specification of the URIs.
>   -watchdog
>        Automatically restart to recover from hung GPUs. Bminer exits itself in case of errors if watchdog is disabled. (default true)

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

Version 6.2.12 (Development preview of 6.3)

 User interface
  - Negative mining profit can be displayed even if the revenue is zero or unknown
 Version notes
  - Correction to Nanominer benchmark device selection and pool list in configuration file
  - More user interface updates to the built-in web interface
 Mining softare
  - Added mining software: Miniz 1.2l
  - CryptoDredge 0.18.0
  - NBMiner 21.4

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Thanks, this one will be included in the new development version.

I will make a small change for the pool configuration for nanominer in the next development preview - planned to be made available very soon.

So what's the problem?You just need to rewrite-worked well before?
I've been there I copied the configuration again-everything works now.

CryptoDredge v0.18.0 released

* New Argon2d algorithm (argon2d-dyn only)
* Support MTP and Cuckaroo29 on NiceHash
* Make API more compatible with ccminer API
* Support mining Aeternity on GPUs with 2 GB of memory (Linux only)
* Support mining Cuckaroo29 on GPUs with 4 GB of memory (Linux only)
* Indicate activity to suppress auto sleep mode (Windows only)


Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.18.0

hello i'have problem with nanominer, no problem with benchmark, but when i want mine cryptonightr in example, i have a message with pool ignore because....and it mine eth...sorry for my english

the problem comes from the config.ini, where all compatible algo appears, it would be necessary that only an algo be there, as during the benchmark

Thanks for the update and great that it's working better now.

The reason for having a profit factor both for the Coin and for the Pool is that you may have more than one pool for a coin. Each pool may have a different fee. If you only do profit switching, this is probably not as relevant, and you have two pools for the same coin, you probably want the numbers to reflect the pool fee as well.

It has also been requested by other users to be able to configure profit factor per pool and coin individually.

You can continue using the profit factor on the pool. You do have a setting "Apply pool profit factor on the Coins tab" in the Options dialog, Statistics Section, that you can use if you only want to set the profit factor on the pool, but still want it to be considered on the coins tab.

Thanks for letting me know. I will of course correct this in the next update.

After the update everything worked well.
Thank you for the prompt correction of the problem!

I have seen patrike that you have returned add the PRofit value in the properties of the coin, in tabs coin by double clicking on a coin

That was before and it was removed, and let's say that the one that has preference is the profit of the currency pool.

How does this new Profit affect the Specs of the currency? It seems to me redundant. If people have problems in finding the profit in the coin pool, pass it from the AVANCED tab and put it under the Password of the pool or a more visible site

TEner two profit can lead to confusion. Can I continue using the currency pool in avance as it is now, and this will affect the currency, profit and the coins tab?

good update, as always

Just small issue -
- Added mining software: Nanominer 1.1.1

Nanominer does not benchmark one GPU but all together..

Version 6.2.11 (Development preview of 6.3)

 GPU mining
  - Added additional algorithms
 Features
  - Added additional options for duration of benchmark
 Integration
  - Added additional exchanges to the coin exchange filter feature
 Version notes
  - Updates to coin properties dynamic update feature
  - User interface updates to the built-in web interface
 Mining softare
  - Added mining software: Nanominer 1.1.1
  - SrbMiner 1.8.2
  - WildRig Miner 0.15.4 preview 16
 Corrections
  - Correction to the path used by the built-in web interface
  - Correction to worker name display when mining with TT-miner

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Thanks for the update on this issue.

This may not be the same issue as @moppidoo reported. I will soon release a new version with some changes. Please get back to me with more details if you still run into the problem. Thanks!

Please also note that every time you change between the Classic and New web interface, you need to exit and restart Awesome Miner once.

Thanks again. I think the change I've implemented for the next release will take care of this issue.

It's a good point, but currently a bit lower priority.

I've looked at this one but I can't see that it provides any API or raw data that Awesome Miner can use. It's a web site with HTML content only and Awesome Miner cannot read this.