[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 198.

moppidoo

jr. member

Activity: 348

Merit: 5

Hi Patrike,

Bit of an issue trying to achieve the following on Managed Profit Miners

Goal:
Switch Pool Groups for x hours every day then back to default Pool Groups

Procedure:

Code:

1. Setup Rule with Time Trigger to trigger at certain hour of the day
2. Rule Action -> Miner Command -> Change group pool -> Selects desired pool group

Result:

Code:

The action did nothing on the miners, the profit switcher still considers all settings that are under Options -> Profit Switching and thus, no effect.

tf2addict

full member

Activity: 675

Merit: 100

Quote from: patrike on March 10, 2019, 03:52:49 PM

Quote from: tf2addict on March 10, 2019, 11:43:04 AM

Also regarding Monero, it's still listed as V8 and my profit is showing $0.00. Can I fix that or do I have to wait for next update?

There will be a new release in just a moment that map Monero to CryptoNightV4 (R).

Thanks Patrike. Works great now.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 6.2.6

ASIC mining
- Save the pools currently active on the Pools tab as Default Pools on the ASIC miner
- Improved compatibility for setting Default Pools and API Access on Antminers
GPU mining
- Monero (XMR) is now listed as CryptoNightV4 (CryptoNightR).
Mining softare
- GMiner 1.35
- TeamRedMiner 0.4
- BMiner 15.3
Corrections
- Correction to a scenario where benchmark results for non-best software could be lost

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: tf2addict on March 10, 2019, 11:43:04 AM

Also regarding Monero, it's still listed as V8 and my profit is showing $0.00. Can I fix that or do I have to wait for next update?

There will be a new release in just a moment that map Monero to CryptoNightV4 (R).

tf2addict

full member

Activity: 675

Merit: 100

Also regarding Monero, it's still listed as V8 and my profit is showing $0.00. Can I fix that or do I have to wait for next update?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: nordmann666 on March 09, 2019, 01:23:54 PM

any idea how to get teamredminer to use --algo cnr instead of cnv8?
tried Command Line Parameter -- but didnt work

You can go to the Options dialog, Managed Software section, and modify the entry for TeamRedMiner. Awesome Miner uses the name "CryptoNight V4" for the new Monero fork. You can enable this line and put the User Defined Command Line "cnr" here.

If you have a coin with the algorithm CryptoNightV4, Awesome Miner will then launch TeamRedMiner with "cnr"

The next release of Awesome Miner will include the latest TeamRedMiner with CryptonightV4 (cnr) suppot enabled by default.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: MHyza on March 08, 2019, 01:13:20 PM

Quote from: Burnie on March 08, 2019, 12:53:39 PM

Quote from: patrike on March 08, 2019, 09:00:29 AM

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

That doesn't sounds good - I will investigate this. Thanks for letting me know.

Anyone else experienced the same issue?

Havn't seen this myself.
Could it be that an old config/backup has been restored if the config.xml file is barfed - e.g. after a crash?
Would this be written to the log with the default settings?

Same here, on multiple RIGs.. :/

I found the issue related to the benchmark and it will be corrected in the next release. Thanks for the reporting the problem.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: TheDOdblG on March 08, 2019, 10:26:40 AM

Hi Patrike, I'm sure you covered this multiple times before, but is there another (cleaner) way to tell AM to use a different Algo? For instance, Masari is using CryptoNight Fast2, but AM tells it to use CryptoNight Fast. I got it to work by changing the Coin in Pool Properties from "Masari" to "Unspecified CryptoNight Fast2", but this obviously is a work around.

I suppose this is a case of where the coin recently forked ot another algorithm?

Awesome Miner gets all coin information, including which algorithm it's based on, via the coin statitics providers like WhatToMine.com and CoinCalculators.io. In case a coin changes the algorithm, it may take some time before these providers changes the algorithm. Awesome Miner can override the algorithm for a coin via the Options dialog, Statistics Providers section, where the setting Override coin algorithm can be used to specify that a specific coin should be using another algorithm.

nordmann666

member

Activity: 363

Merit: 16

any idea how to get teamredminer to use --algo cnr instead of cnv8?
tried Command Line Parameter -- but didnt work

tf2addict

full member

Activity: 675

Merit: 100

deleted

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on March 08, 2019, 09:00:29 AM

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

That doesn't sounds good - I will investigate this. Thanks for letting me know.

Anyone else experienced the same issue?

Do not

MHyza

newbie

Activity: 36

Merit: 0

Quote from: Burnie on March 08, 2019, 12:53:39 PM

Quote from: patrike on March 08, 2019, 09:00:29 AM

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

That doesn't sounds good - I will investigate this. Thanks for letting me know.

Anyone else experienced the same issue?

Havn't seen this myself.
Could it be that an old config/backup has been restored if the config.xml file is barfed - e.g. after a crash?
Would this be written to the log with the default settings?

Same here, on multiple RIGs.. :/

Burnie

newbie

Activity: 58

Merit: 0

Quote from: patrike on March 08, 2019, 09:00:29 AM

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

That doesn't sounds good - I will investigate this. Thanks for letting me know.

Anyone else experienced the same issue?

Havn't seen this myself.
Could it be that an old config/backup has been restored if the config.xml file is barfed - e.g. after a crash?
Would this be written to the log with the default settings?

TheDOdblG

newbie

Activity: 11

Merit: 0

Hi Patrike, I'm sure you covered this multiple times before, but is there another (cleaner) way to tell AM to use a different Algo? For instance, Masari is using CryptoNight Fast2, but AM tells it to use CryptoNight Fast. I got it to work by changing the Coin in Pool Properties from "Masari" to "Unspecified CryptoNight Fast2", but this obviously is a work around.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

That doesn't sounds good - I will investigate this. Thanks for letting me know.

Anyone else experienced the same issue?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: leevancleef on March 07, 2019, 12:03:19 PM

there is a way to export benchmark results to multiple profit profiles? copying it manually is a pain ...

Good point - It's noted.

Jasbir99

newbie

Activity: 1

Merit: 0

Quote from: GoRdiE on March 07, 2019, 03:37:32 PM

Quote from: patrike on March 07, 2019, 10:22:19 AM

Awesome Miner version 6.2.5

Integration
- CoinToMine update interval changed from 15 to 5 minutes when an API key is used
Mining softare
- BMiner 15.2
- TT-Miner 2.1.14
- SrbMiner 1.8
- NBMiner 21.0
- XMRig 2.14 for AMD and nVidia
- XMRig 2.14.1 for CPU

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

And:

Quote from: leevancleef on March 07, 2019, 12:03:19 PM

there is a way to export benchmark results to multiple profit profiles? copying it manually is a pain ...

I think is a good idea

Quote from: patrike on July 20, 2018, 09:10:10 AM

Quote from: cryptochristo on July 18, 2018, 09:58:09 PM

I upgraded to Version: 5.3.3 and Phoenix miner no longer connects to any pools. Anyone having this issue? It prints this then just hangs there... then disconnects then reconnects. Bminer works...

Phoenix Miner 3.0c Windows/msvc - Release
-----------------------------------------

Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
Listening for CDM remote manager at port 4028 in full mode
Eth: the pool list contains 1 pool
Eth: primary pool: us1-etc.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool us1-etc.ethermine.org:4444 (proto: EthProxy)
Eth: Connected to ethash pool us1-etc.ethermine.org:4444 (54.177.207.188)
GPU1: 59C 35%, GPU2: 65C 51%, GPU3: 60C 43%, GPU4: 60C 43%, GPU5: 61C 45%, GPU6: 58C 41%

I've actually had another user that experienced issues with Phoenix Miner 3.0c, where going back to the previous version of Phoenix Miner (2.9 if I remember correctly) worked better. That could be an option to try.

GoRdiE

newbie

Activity: 162

Merit: 0

Quote from: patrike on March 07, 2019, 10:22:19 AM

Awesome Miner version 6.2.5

Integration
- CoinToMine update interval changed from 15 to 5 minutes when an API key is used
Mining softare
- BMiner 15.2
- TT-Miner 2.1.14
- SrbMiner 1.8
- NBMiner 21.0
- XMRig 2.14 for AMD and nVidia
- XMRig 2.14.1 for CPU

Hi patrike,

When updating to the new version, all the benchmarks have been deleted. Only the best benchmark of each algo has been saved Shocked

And:

Quote from: leevancleef on March 07, 2019, 12:03:19 PM

there is a way to export benchmark results to multiple profit profiles? copying it manually is a pain ...

I think is a good idea

leevancleef

member

Activity: 112

Merit: 10

there is a way to export benchmark results to multiple profit profiles? copying it manually is a pain ...

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 6.2.5

Integration
- CoinToMine update interval changed from 15 to 5 minutes when an API key is used
Mining softare
- BMiner 15.2
- TT-Miner 2.1.14
- SrbMiner 1.8
- NBMiner 21.0
- XMRig 2.14 for AMD and nVidia
- XMRig 2.14.1 for CPU

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 198. (Read 703146 times)