[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 212.

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on January 29, 2019, 02:35:20 PM

Quote from: joseph32 on January 29, 2019, 11:32:24 AM

The revenue and profit of BEAM in the Coins-Tab are greyed out. So all my BEAM miners will show $0. Is there any trick to show the price or is it still not possible?

The $2.14 on exchange it shows correctly, but everything else on the right side seems garbage

Is this with the latest version of Awesome Miner? The reason I'm asking is that it looks fine on my system and there was a change about a week ago to the Equihash 150,5 calculations on CoinCalculators.io that Awesome Miner adjusted to a few versions ago.

This coin doesn't have any active exchanges listed - so it's currently marked as gray for that reason.

https://cointomine.today/calculator/coin/BEAM/

in bitforex, hotbit.io

I have bitforex marked, but even if I do not mark it, I do not get the price either.

At my request, the owner of cointomine.today activated the coin, but still does not exit.

It is not with the only currency that this happens to me, it happens to me with a few.

In the list of exchanges or this hotbit.io but I think he also added bitforex.

You could check this PAtrike, I'll tell you it's not just a coin, it happens in a few. Is that now I can not undermine it in AUTO and if I mine it directly I have no profit.

Maybe adding hotbit to the exchange list is solved.

I'm sorry to notice every detail, in the end it's a good for everyone.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: opit78 on January 30, 2019, 07:49:15 AM

BTW exchange rate for this coin is correct.
So:
My hash rate - correct
Exchange rate - correct
Difficulty - correct
Coins/Day calculated by AW - waaaay off

This coin probably requires a unique exponential factor. It's set to 5 by default for EquihashZero in Awesome Miner and works fine for the Zero coin for example. This factor can manually be overridden in the Properties dialog for a coin in Awesome Miner.

For this coin it is likely a little higher value, but unfortunately I don't know what it is and where to find it. I can get in touch with the CoinToMine admin to see if it can be provided via the API to Awesome Miner.

Edit:
About Zero coin that was discuessed earlier. I think the solution for Zero is to enable Exchange Volume filtering in Awesome Miner. That will make Awesome Miner ignore the statistics where the trade volume is very low (and less likely to be accurate). Please go to the Options dialog, Statistics Providers section where you can set the minimum exchange volume to something like 0.1

opit78

newbie

Activity: 5

Merit: 0

BTW exchange rate for this coin is correct.
So:
My hash rate - correct
Exchange rate - correct
Difficulty - correct
Coins/Day calculated by AW - waaaay off

opit78

newbie

Activity: 5

Merit: 0

Quote from: patrike on January 30, 2019, 07:25:30 AM

Quote from: opit78 on January 30, 2019, 07:09:46 AM

Guys.
I notice that calculations for all new equihash algos are way off, for example Equihash Zero earnings are not even near to reality. AW is calculating that I will mine much more coins per day than it really is. Please advice.

I can see that there are a few coins provided by CoinToMine that use exchange rates that are quite high.

The Zero coin is an example. If you manually add Zero for CoinCalculators.io:
https://www.coincalculators.io/api.aspx?name=zero
you will see that the number in Awesome Miner matches exactly what's specified on the CoinCalculatios.io web site and it's about half of what CoinToMine provides in terms of revenue.

But AW is taking difficulty and your current/benchmarked mining speed to calculate profits.
Calculations provided by AW for new Equihash algos are wrong.
As example I'll take GENX which is on Equihash Zero. AW is telling me that I'll mine over 680000 coins per day with 1kH/s speed, difficulty is correct, about 1800 at this moment.
In reality I'll mine less than 50000 per day (around 2000 per hour on SuprNova pool) which is over 10 times less than AW's estimated earnings.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: opit78 on January 30, 2019, 07:09:46 AM

Guys.
I notice that calculations for all new equihash algos are way off, for example Equihash Zero earnings are not even near to reality. AW is calculating that I will mine much more coins per day than it really is. Please advice.

I can see that there are a few coins provided by CoinToMine that use exchange rates that are quite high.

The Zero coin is an example. If you manually add Zero for CoinCalculators.io:
https://www.coincalculators.io/api.aspx?name=zero
you will see that the number in Awesome Miner matches exactly what's specified on the CoinCalculatios.io web site and it's about half of what CoinToMine provides in terms of revenue.

opit78

newbie

Activity: 5

Merit: 0

Guys.
I notice that calculations for all new equihash algos are way off, for example Equihash Zero earnings are not even near to reality. AW is calculating that I will mine much more coins per day than it really is. Please advice.

Binary100100

member

Activity: 180

Merit: 10

Quote from: patrike on January 30, 2019, 04:58:11 AM

Quote from: Binary100100 on January 29, 2019, 09:07:29 PM

Quote from: TheDOdblG on January 29, 2019, 09:03:12 PM

Quote from: Binary100100 on January 29, 2019, 06:43:11 PM

I just started having a problem with GrinPro miner with my 4 AMD cards.
Any ideas?

Maybe you need to increase windows virtual memory? I think around 8 GB per card did the trick for me. Are your 570’s 8GB? Don't think you can mine Grin with anything under 6.

That's definitely not it.
I have 263424 MB of virtual memory for four 8GB cards. (Yes, I have the 8GB version, not the 4GB)
It wasn't until I updated AM to 6.1.9 that the problem occurred.

EDIT:

I figured it out! The problem was in the config.xml file.

   Radeon RX 570 Series
   AMD
   0
   0
   true


to

   Radeon RX 570 Series
   AMD
   0
   1
   true


I had to change my PlatformID from 0 to 1 but when I saved it and started AM it would set it back to 0 again. For some reason AM kept changing it to 0 which was causing it to fail so I also had to change the permissions to Read Only.

Thanks for finding this. There isn't really any documentation for what PlatformID is referring to here but I will assume that in the case of AMD it's the OpenCL platform ID.
Do you have other GPU's on this system as well (either nVidia or an active Intel on-board GPU)?

I will change the next release of Awesome Miner to automatically set the PlatformID to the AMD OpenCL platform ID. Please let me know your feedback once the new version is available. Thanks!

I have two systems, MiningRig1 which is strictly NVidia Cards and MiningRig2 which has four AMD cards.
Everything worked fine until I updated to 6.1.9 and rebooted the rigs. Rig1 (NVidia) started fine, Rig2 (AMD) gave the error.
To troubleshoot, I downloaded GrinPro1.1 and setup without AM and everything worked fine. I copied the working config.xml from GrinPro1.1 that was generated and pasted it into grinpro_1_1_5 folder (replaced the existing file) then started it again. Still had errors. I compared the original config.xml file with the one in AppData\Roaming\AwesomeMinerService\grinpro_1_1_5 and manually changed the PlatformID's but when I started AM it would revert them back and give the error again. Changing the permissions seems to be a temporary workaround for anyone else having the issue.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ralf007at on January 30, 2019, 01:19:58 AM

Quote from: patrike on January 29, 2019, 02:42:55 PM

Quote from: ralf007at on January 29, 2019, 11:59:21 AM

Hi Patrike,

is there an error in the profitability calculation with some scrypt-coins as for example Einsteinium (EMC2)?
Awesome-Miner shows a revenue of about 10 Euro per Day with 510 MH/s?
then if i mine in different pools (such as mining-dutch) AM also shows this revenue and a profit of about 8 Euro per Day.

but in reality, the revenue is about 1 Euro?!

BR Ralf

Hi Ralf,

When I configure scrypt for 510MH/s I get a revenue per day of $1.21 in Awesome Miner.
Have you entered any custom profit factor for either the coin or for the pool? Do you see the high values on the Coins tab as well?

Hi Patrike,

unfortunatly i didn't enter any custom profit factor?! and yes - i see the high values on the Coins tab as well!
i think the reason is the value shown in the column Exchange - the shown price is not correct?!

i didn't change anything in the Statistics Providers either: WhatToMine.com, CoinCalculators.io and CoinToMine.today are activated?!

BR Ralf

Do you get any other result if you change the order of the statistics provider, to make sure the data is loaded from one of the others? In case it's only one of them providing incorrect stats.

If you wasn't able to resolve the issue, can you please send me a screenshot of this coin on the Coins tab? Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Binary100100 on January 29, 2019, 09:07:29 PM

Quote from: TheDOdblG on January 29, 2019, 09:03:12 PM

Quote from: Binary100100 on January 29, 2019, 06:43:11 PM

I just started having a problem with GrinPro miner with my 4 AMD cards.
Any ideas?

Maybe you need to increase windows virtual memory? I think around 8 GB per card did the trick for me. Are your 570’s 8GB? Don't think you can mine Grin with anything under 6.

That's definitely not it.
I have 263424 MB of virtual memory for four 8GB cards. (Yes, I have the 8GB version, not the 4GB)
It wasn't until I updated AM to 6.1.9 that the problem occurred.

EDIT:

I figured it out! The problem was in the config.xml file.

   Radeon RX 570 Series
   AMD
   0
   0
   true


to

   Radeon RX 570 Series
   AMD
   0
   1
   true


I had to change my PlatformID from 0 to 1 but when I saved it and started AM it would set it back to 0 again. For some reason AM kept changing it to 0 which was causing it to fail so I also had to change the permissions to Read Only.

Thanks for finding this. There isn't really any documentation for what PlatformID is referring to here but I will assume that in the case of AMD it's the OpenCL platform ID.
Do you have other GPU's on this system as well (either nVidia or an active Intel on-board GPU)?

I will change the next release of Awesome Miner to automatically set the PlatformID to the AMD OpenCL platform ID. Please let me know your feedback once the new version is available. Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on January 29, 2019, 06:59:06 PM

Patrike,

I just want to say THANKS for that new editable pool-list "Add additional pools to Managed Profit Switching" instead of the old drop-down. Dunno in which of the newer versions it was integrated, but its awesome! Makes everything much, much easier.

Edit: Something seems strange with GRIN calculation in AM.

If I manually check coincalculators for BEAM with 287 H/s, 0 Power Cost, 0 Pool Fee, Latest Price and Current Difficulty, it says 5.56 coins per day. This will match 100% with AM. So everything is fine.
If I check GRIN with 58 H/s and same settings, it says 1.79 coins per day. But in AM it says 1.4 coins per day. Also tried the calculator on F2Pool, it says 1.71 coins. So its definitely not the lower 1.4 coins.

Is this a bug or is it any settings in AM? Can you please check this? Because it makes the calculation wrong and a rig should be mining GRIN, not BEAM. Right now I bypassed this by setting a profit factor of 1,25 for GRIN.

Thank you!

I've asked CoinCalculators admin about Grin as well. For AE CoinCalculators was using a -12% pool luck which caused the numbers to be different on their web site compared to what was reported to Awesome Miner.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: patrike on January 29, 2019, 02:33:14 PM

Quote from: terryborg on January 29, 2019, 08:56:56 AM

Thanks for the update, the context menu worked and I could use customer pool again.
Also support AE coin, although the hash rate and the price count were not accurate vs actual,but could use profit factor in the customer pool solve temporary, it's good.

Good work and keep it.

thanks again.

Thanks for the nice comments.

For AE it looks like Awesome Miner gives values that are about 12% higher, but the calculations made are correct based on the numbers and assumptions made by Awesome Miner. I've contacted CoinCalculators admin about this because it might be some unique secret to the calculations for this specific coin.

I've got a response from CoinCalculators and they are assuming a -12% pool luck for AE, resulting in that the number you see in Awesome Miner doesn't exactly match what CoinCalculators list on the web site.

There are currently no automatic solution to this, but I've suggested to make this information available.

ralf007at

newbie

Activity: 52

Merit: 0

Quote from: patrike on January 29, 2019, 02:42:55 PM

Quote from: ralf007at on January 29, 2019, 11:59:21 AM

Hi Patrike,

is there an error in the profitability calculation with some scrypt-coins as for example Einsteinium (EMC2)?
Awesome-Miner shows a revenue of about 10 Euro per Day with 510 MH/s?
then if i mine in different pools (such as mining-dutch) AM also shows this revenue and a profit of about 8 Euro per Day.

but in reality, the revenue is about 1 Euro?!

BR Ralf

Hi Ralf,

When I configure scrypt for 510MH/s I get a revenue per day of $1.21 in Awesome Miner.
Have you entered any custom profit factor for either the coin or for the pool? Do you see the high values on the Coins tab as well?

Hi Patrike,

unfortunatly i didn't enter any custom profit factor?! and yes - i see the high values on the Coins tab as well!
i think the reason is the value shown in the column Exchange - the shown price is not correct?!

i didn't change anything in the Statistics Providers either: WhatToMine.com, CoinCalculators.io and CoinToMine.today are activated?!

BR Ralf

nordmann666

member

Activity: 363

Merit: 16

Quote from: patrike on January 29, 2019, 02:44:24 PM

Quote from: nordmann666 on January 29, 2019, 12:45:59 PM

another minor request...i cant scroll with mouse (for example in coin list) - my failure or can you add this "feature"

The coin list is scrollable with the mouse. Does the control have input focus when you do the scrolling (click on it first to make sure)?

i dont mean the "coins" list - when i edit the managed miner for example there is the pool list in first tab. i click on the arrow to choose a pool. than i cant scrool. even when i click on the slide bar i cant scroll...only after pointing in free space in top of the list i can scrool) - but like i said...very minor problem and now i know i can point somewhere in top of the lists and than i can scrool...thats fine for me

Binary100100

member

Activity: 180

Merit: 10

Quote from: TheDOdblG on January 29, 2019, 09:03:12 PM

Quote from: Binary100100 on January 29, 2019, 06:43:11 PM

I just started having a problem with GrinPro miner with my 4 AMD cards.
Any ideas?

Quote

starting GrinPro.io miner..
*******************************************************
HTML Dashboard at http:/localhost:5777
JSON API listening on http://localhost:5777/api
   (Both also available over network)
   (API docs: https://grinpro.io/api.html)
*******************************************************
Init started for gpu 0 - Radeon RX 570 Series
Init completed for gpu 0 - Radeon RX 570 Series with SUCCESS
Init started for gpu 1 - Radeon RX 570 Series
Init completed for gpu 1 - Radeon RX 570 Series with SUCCESS
Init started for gpu 2 - Radeon RX 570 Series
ERROR GPU Radeon RX 570 Series ID 1: Unable to select OpenCL device 1 on platform 0
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 2: Unable to select OpenCL device 2 on platform 0
Init completed for gpu 2 - Radeon RX 570 Series with SUCCESS
Init started for gpu 3 - Radeon RX 570 Series
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 3: Unable to select OpenCL device 3 on platform 0
Init completed for gpu 3 - Radeon RX 570 Series with SUCCESS
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 1 terminated, restarting...
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
INFO Connected to node grin29.f2pool.com.
INFO Stratum grin29.f2pool.com:13654 login ok
--------------------------------------------------------------------------------
Shares (sub/acc/rej): 0/0/0 Last share: 4 seconds
--------------------------------------------------------------------------------
GPU 0 : Radeon RX 570 Series STARTING Mining at 0.00 gps Solutions: 0
   Last Message: 18:41:32: Waiting for job....
GPU 1 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
   Last Message: 18:41:18: Unable to select OpenCL device 1 on platform 0
GPU 2 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
   Last Message: 18:41:21: Unable to select OpenCL device 2 on platform 0
GPU 3 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
   Last Message: 18:41:24: Unable to select OpenCL device 3 on platform 0
--------------------------------------------------------------------------------
ERROR GPU Radeon RX 570 Series ID 0: Critical error in main ocl loop The kernel could not be enqueued. Error code: InvalidWorkGroupSize.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 2 terminated, restarting...
WARNING Worker 3 terminated, restarting...
WARNING Worker 0 terminated, restarting...

Maybe you need to increase windows virtual memory? I think around 8 GB per card did the trick for me. Are your 570’s 8GB? Don't think you can mine Grin with anything under 6.

That's definitely not it.
I have 263424 MB of virtual memory for four 8GB cards. (Yes, I have the 8GB version, not the 4GB)
It wasn't until I updated AM to 6.1.9 that the problem occurred.

EDIT:

I figured it out! The problem was in the config.xml file.

   Radeon RX 570 Series
   AMD
   0
   0
   true


to

   Radeon RX 570 Series
   AMD
   0
   1
   true


I had to change my PlatformID from 0 to 1 but when I saved it and started AM it would set it back to 0 again. For some reason AM kept changing it to 0 which was causing it to fail so I also had to change the permissions to Read Only.

TheDOdblG

newbie

Activity: 11

Merit: 0

Quote from: Binary100100 on January 29, 2019, 06:43:11 PM

I just started having a problem with GrinPro miner with my 4 AMD cards.
Any ideas?

Quote

starting GrinPro.io miner..
*******************************************************
HTML Dashboard at http:/localhost:5777
JSON API listening on http://localhost:5777/api
(Both also available over network)
(API docs: https://grinpro.io/api.html)
*******************************************************
Init started for gpu 0 - Radeon RX 570 Series
Init completed for gpu 0 - Radeon RX 570 Series with SUCCESS
Init started for gpu 1 - Radeon RX 570 Series
Init completed for gpu 1 - Radeon RX 570 Series with SUCCESS
Init started for gpu 2 - Radeon RX 570 Series
ERROR GPU Radeon RX 570 Series ID 1: Unable to select OpenCL device 1 on platform 0
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 2: Unable to select OpenCL device 2 on platform 0
Init completed for gpu 2 - Radeon RX 570 Series with SUCCESS
Init started for gpu 3 - Radeon RX 570 Series
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 3: Unable to select OpenCL device 3 on platform 0
Init completed for gpu 3 - Radeon RX 570 Series with SUCCESS
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 1 terminated, restarting...
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
INFO Connected to node grin29.f2pool.com.
INFO Stratum grin29.f2pool.com:13654 login ok
--------------------------------------------------------------------------------
Shares (sub/acc/rej): 0/0/0 Last share: 4 seconds
--------------------------------------------------------------------------------
GPU 0 : Radeon RX 570 Series STARTING Mining at 0.00 gps Solutions: 0
Last Message: 18:41:32: Waiting for job....
GPU 1 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:18: Unable to select OpenCL device 1 on platform 0
GPU 2 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:21: Unable to select OpenCL device 2 on platform 0
GPU 3 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:24: Unable to select OpenCL device 3 on platform 0
--------------------------------------------------------------------------------
ERROR GPU Radeon RX 570 Series ID 0: Critical error in main ocl loop The kernel could not be enqueued. Error code: InvalidWorkGroupSize.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 2 terminated, restarting...
WARNING Worker 3 terminated, restarting...
WARNING Worker 0 terminated, restarting...

Maybe you need to increase windows virtual memory? I think around 8 GB per card did the trick for me. Are your 570’s 8GB? Don't think you can mine Grin with anything under 6.

joseph32

member

Activity: 418

Merit: 21

Patrike,

I just want to say THANKS for that new editable pool-list "Add additional pools to Managed Profit Switching" instead of the old drop-down. Dunno in which of the newer versions it was integrated, but its awesome! Makes everything much, much easier.

Edit: Something seems strange with GRIN calculation in AM.

If I manually check coincalculators for BEAM with 287 H/s, 0 Power Cost, 0 Pool Fee, Latest Price and Current Difficulty, it says 5.56 coins per day. This will match 100% with AM. So everything is fine.
If I check GRIN with 58 H/s and same settings, it says 1.79 coins per day. But in AM it says 1.4 coins per day. Also tried the calculator on F2Pool, it says 1.71 coins. So its definitely not the lower 1.4 coins.

Is this a bug or is it any settings in AM? Can you please check this? Because it makes the calculation wrong and a rig should be mining GRIN, not BEAM. Right now I bypassed this by setting a profit factor of 1,25 for GRIN.

Thank you!

Binary100100

member

Activity: 180

Merit: 10

I just started having a problem with GrinPro miner with my 4 AMD cards.
Any ideas?

Quote

starting GrinPro.io miner..
*******************************************************
HTML Dashboard at http:/localhost:5777
JSON API listening on http://localhost:5777/api
(Both also available over network)
(API docs: https://grinpro.io/api.html)
*******************************************************
Init started for gpu 0 - Radeon RX 570 Series
Init completed for gpu 0 - Radeon RX 570 Series with SUCCESS
Init started for gpu 1 - Radeon RX 570 Series
Init completed for gpu 1 - Radeon RX 570 Series with SUCCESS
Init started for gpu 2 - Radeon RX 570 Series
ERROR GPU Radeon RX 570 Series ID 1: Unable to select OpenCL device 1 on platform 0
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 2: Unable to select OpenCL device 2 on platform 0
Init completed for gpu 2 - Radeon RX 570 Series with SUCCESS
Init started for gpu 3 - Radeon RX 570 Series
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR GPU Radeon RX 570 Series ID 3: Unable to select OpenCL device 3 on platform 0
Init completed for gpu 3 - Radeon RX 570 Series with SUCCESS
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 1 terminated, restarting...
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
INFO Connected to node grin29.f2pool.com.
INFO Stratum grin29.f2pool.com:13654 login ok
--------------------------------------------------------------------------------
Shares (sub/acc/rej): 0/0/0 Last share: 4 seconds
--------------------------------------------------------------------------------
GPU 0 : Radeon RX 570 Series STARTING Mining at 0.00 gps Solutions: 0
Last Message: 18:41:32: Waiting for job....
GPU 1 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:18: Unable to select OpenCL device 1 on platform 0
GPU 2 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:21: Unable to select OpenCL device 2 on platform 0
GPU 3 : Radeon RX 570 Series ERROR Mining at 0.00 gps Solutions: 0
Last Message: 18:41:24: Unable to select OpenCL device 3 on platform 0
--------------------------------------------------------------------------------
ERROR GPU Radeon RX 570 Series ID 0: Critical error in main ocl loop The kernel could not be enqueued. Error code: InvalidWorkGroupSize.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
ERROR Listen errorEnd of Stream encountered before parsing was completed.
WARNING Worker 2 terminated, restarting...
WARNING Worker 3 terminated, restarting...
WARNING Worker 0 terminated, restarting...

Burnie

newbie

Activity: 58

Merit: 0

Quote from: patrike on January 29, 2019, 04:25:33 PM

Quote from: Burnie on January 29, 2019, 03:49:45 PM

Quote from: patrike on January 29, 2019, 02:46:09 PM

It looks like a known issue according to the Gminer thread. It works fine to mine on Nicehash for a while, but then you run into errors.

But is it possible for AM to report/use 'total_accepted_shares' when there is no accepted per device?

gminer's /stat:
{"uptime":59,"server":"stratum://beam.usa.nicehash.com:3370","user": "X.Y","algorithm":"Equihash 150,5 \"Beam-PoW\"","electricity":0.004,"total_accepted_shares":14,"total_rejected_shares":0,"devices":[{"gpu_id":0,"cuda_id":0,"bus_id":"0000:01:00.0","name":"EVGA GeForce GTX 1080 Ti 11GB","speed":31,"temperature":73,"temperature_limit":90,"power_usage":256}],"speedRatePrecision":0,"speedUnit":"Sol/s","powerUnit":"Sol/W"}

Thanks for finding this one. The official API is not returning this information, but the data used by the Gminer web interface that you point to here do include it. I will make use of this information about shares.

Seems the gminer problem is just for beam - for zhash the api reports accepted_shares per device.

{"uptime":60,"server":"stratum://zhash.usa.nicehash.com:3369","user": "X.Y","algorithm":"Equihash 144,5 \"auto\"","electricity":0.004,"total_accepted_shares":2,"total_rejected_shares":0,"devices":
[{"gpu_id":0,"cuda_id":0,"bus_id":"0000:01:00.0","name":"EVGA GeForce GTX 1080 Ti 11GB","speed":95,"accepted_shares":2,"rejected_shares":0,"temperature":72,"temperature_limit":90,"power_usage":261}],"speedRatePrecision":0,"speedUnit":"Sol/s","powerUnit":"Sol/W"}

BTW: They just released 1.25 which should fix the nicehash nounce problem.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Burnie on January 29, 2019, 03:49:45 PM

Quote from: patrike on January 29, 2019, 02:46:09 PM

It looks like a known issue according to the Gminer thread. It works fine to mine on Nicehash for a while, but then you run into errors.

But is it possible for AM to report/use 'total_accepted_shares' when there is no accepted per device?

gminer's /stat:
{"uptime":59,"server":"stratum://beam.usa.nicehash.com:3370","user": "X.Y","algorithm":"Equihash 150,5 \"Beam-PoW\"","electricity":0.004,"total_accepted_shares":14,"total_rejected_shares":0,"devices":[{"gpu_id":0,"cuda_id":0,"bus_id":"0000:01:00.0","name":"EVGA GeForce GTX 1080 Ti 11GB","speed":31,"temperature":73,"temperature_limit":90,"power_usage":256}],"speedRatePrecision":0,"speedUnit":"Sol/s","powerUnit":"Sol/W"}

Thanks for finding this one. The official API is not returning this information, but the data used by the Gminer web interface that you point to here do include it. I will make use of this information about shares.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on January 29, 2019, 03:12:41 PM

And my Edit: I figured it out. If I set this under Statistic Providers/Exchange filter mode -> Set mining revenue to zero -> Minimum exchange volume (BTC): 1, all will be greyed out as in the picture. If I disable the filter mode, everything works fine. I think this is because there is no exchange in coincalculators, right?

Yes!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 212. (Read 703563 times)