Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 207. (Read 703563 times)

This error message indicates that GrinPro miner failed to load because it couldn't find or initialize .NET Core 2.2.1 (or ASP.NET Core 2.2.1). This is however a bit strange as you say you can run it manually which indicates that you should have these packages installed already.

If you open cmd.exe and execute the following two command, do you get the same error?
cd C:\Users\Greg\AppData\Roaming\AwesomeMinerService\grinpro_1_1_5
GrinProMiner.exe  api-port=4032

I tried a bit with F2pool grin and found out that for the error message above, you need to force Grin Pro to use SSL connection. In the Properties of your pool in Awesome Miner, please set the Pool Connection URL to:
stratum+ssl://grin29.f2pool.com:13654

The Awesome Miner overclocking works very similar to the Afterburner overclocking feature. As you notice you just have to enable it via the Options dialog and then it's being used automatically.

The GPU properties you can adjust may be a little different depending on what card you have if you compare Awesome Miner and Afterburner, but in general you should be able to use the same clocking profiles like before.

As this feature is currently in a Development version right now, the documentation on the web site is not yet updated to reflect this new feature.

Hello Patrike,
I think the new way AM calculate grin is little too optimistic. In my own example, for a hashrate of 45 H/s, with stats set to "current", AM tells me i would gain around 1.89 coin per day. For real, i get around 1.12.
So to have a more realistic number, i had to set a profit factor of 0.68 in coin properties.
I don't know it it's a real issue but i prefer to make a feedback on this...

Thanks for the update. I assume you are on development version 6.1.12 for the clocking on Linux.

When you perform a clocking operation on Linux, there will be a log file entry "NV:ExecuteCommand" in the Remote Agent log file (~/.local/share/AwesomeMinerService/) that will state the command line used to set nVidia clocking. If you manually execute this command, do you get any more detailed error messages?

@Patrike

Bminer 14.2.0 released with support of Cuckatoo31 on 1080 Ti

Am show speed in MHs instead of Hs by the way.

I forgot that not all miners are on Kano - I do have one miner that is on Slushpool, it has also had the same issue, just less frequently as it is only one miner.

https://github.com/KlausT/ccminer/releases/tag/8.24

KlausT CCMiner UPDATE

https://github.com/KlausT/ccminer/releases/download/8.24/ccminer-824-cuda10-x64.zip

added lyra2v3 algo (Vertcoin)

I have no idea what happened but on my AMD rig nothing is working right anymore. I'm trying the 6.1.12 version but since installing I can't use the rig at all. I'm trying to avoid doing a clean install of Windows 10 since I'm not sure that's the problem. It's not virtual memory because I have 256G allocated for that.

Anyway, here's what I'm experiencing:

For Grin using GrinPro Miner 1.1 it starts and stops a few times and then crashes the Remote Agent (updated to latest version as well.)

This isn't just GrinPro miner related either. I tried to mine ETH and it yielded the same results.
I opted for pastebin for the Windows logs so I wouldn't spam the forum thread more than I already may have. Sorry about that. I couldn't find an option to attach text files.
Any help that you can provide would be appreciated. Thanks.

I do not feel like experimenting because I do not deconfigure.

How to use the native AW overclocking? I have no idea how to do it. I know that if I frame it, the aftherburner configuration is unchecked, but I do not know anymore.

Do they serve the same profiles that I already have?

Apperance > customize progress
"Coins/day: " + Math.Round(miningHelper.GetCoinsPerDay(), 4)


@patrike, I have a little problem. I leave you a capture so you can see that by configuration I added the coins per day.

The problem is the following. When I change the profit in a currency, this is reflected in the daily profit, even in coins that you recently included. But the coins per day do not change. It does not matter if I put 0.7 that the 1.5 coins per day that I calculate do not change, I understand why the profit factor does not affect the formula for the stamping of coins a day.

For me it is important, because when measuring pools / currencies to know their real profit and then put the resulting profit, this is not reflected in the currencies per day.

Please could you tell me how to improve the configuration line or that you fix it in the next update. It does not make sense for a currency to put a profit of 0.80, effectively falling into the daily profit, but the coins remain the same.

My recommendation, in my ignorance, is that it would be more appropriate for the PROFIT factor to affect the HASH, in that way it will affect the price and the coins per day.

I think that from what I see, the profit only affects the price, therefore it does not affect the currencies per day because it is fixed in the HASH

I hope to give some solution

@Patrike
First off this is a huge + for AM Thank you. 

Scenario. I have several Rigs that require unique settings per card.  Presently using OverdriveNtoool w .bat file.  I see you can set each card individually but how would I achieve multiple OC/Voltage settings from a profile standpoint?

Another suggestion is if you used the latest beta of OverdriveNtool they added a grat feature for fan controls not as good as a custom curve but very effective possibly this could be added or looked at as an addition.  Basically you have fan settings for 4 temps  w a %  so it could be like 50c=50% 60c=70% 65c=85% 70c=100% both the temp and the percentage are adjustable.

https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/page-23

Link to the beta download:
https://www.dropbox.com/s/ibxcdlrgkm82ccg/OverdriveNTool%200.2.8beta1.7z?dl=1

Thank you for an "AWESOME" program

"screen" was one of the problems, but one more problem is that AwesomeMinerService by default located in /AwesomeMinerSerivice/bminer......... After i copied  to /home/user/AwesomeMinerService, miner started and work all well.
Another problem, i cannot controll Overlock Settings. coolbits set to 28, nividia prime, still nothing. Any advice ? ubuntu 18.04

Can you please check if the behavior goes away if you take one of the Antminers and change to another pool? Just to confirm if it's the same problem or something else. Thanks!

Initialize diagnostics (20)
Starting Diagnostics. Awesome Miner Remote Agent version: 6.1.12
OS: Microsoft Windows 10 Pro 64-bit
AMD driver version: BETA
AMD OpenCL Platform ID: 1
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 5
Engine Type: GrinProMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Set clocking start profile: 29, MiningRig2 Grin OC #1 (when stopping, the following will be used: -1, type: Single, Use: False)
Properties: (WindowMode: ConsoleFormat, EngineType: GrinProMiner, IsProfitMiner: False)
====================================================================================================
C:\Users\Greg\AppData\Roaming\AwesomeMinerService\grinpro_1_1_5\GrinProMiner.exe  api-port=4032
Configuration:

http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 
    grin29.f2pool.com
    13654
    false
    binary100100.MiningRig2
    x
 
 
   
    0
    false
   
   
 
 
   
      Radeon RX 570 Series
      AMD
      0
      1
      true
   
   
      Radeon RX 570 Series
      AMD
      1
      1
      true
   
   
      Radeon RX 570 Series
      AMD
      2
      1
      true
   
   
      Radeon RX 570 Series
      AMD
      3
      1
      true
   
 

====================================================================================================
Mining Engine Process started, PID: 2364
> Failed to initialize CoreCLR, HRESULT: 0x80070057

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

Initialize GPU diagnostics (20)
Number of GPU's: 4
0 (0):Radeon RX 570 Series
               PCI BusId: 10
           PCI Id Device: 0
        PCI Id SubDevice: 0xC5701682
          Subvendor Name: XFX
       Overdrive Version: OverdriveN
       Current CoreSpeed: 300 MHz
     Current MemorySpeed: 300 MHz
     Current Utilization: 0 %
         Current Voltage: 0 mV
          Current Power:  7 W
            Current Temp: 33 °C

              PowerLimit: 0 %, (0 - 0, Default: 0)
               TempLimit: 90 °C, (0 - 0, Default: 0)
           FanTargetTemp: 75 °C, (0 - 0, Default: 0)
            FanTargetMax: 3000 RPM, (0 - 0, Default: 0)
                FanSpeed: 100 %, (0 - 100, Default: 0)
                          4077 RPM


1 (1):Radeon RX 570 Series
               PCI BusId: 14
           PCI Id Device: 0
        PCI Id SubDevice: 0xC5701682
          Subvendor Name: XFX
       Overdrive Version: OverdriveN
       Current CoreSpeed: 300 MHz
     Current MemorySpeed: 300 MHz
     Current Utilization: 0 %
         Current Voltage: 0 mV
          Current Power:  6 W
            Current Temp: 31 °C

              PowerLimit: 0 %, (0 - 0, Default: 0)
               TempLimit: 90 °C, (0 - 0, Default: 0)
           FanTargetTemp: 75 °C, (0 - 0, Default: 0)
            FanTargetMax: 3000 RPM, (0 - 0, Default: 0)
                FanSpeed: 100 %, (0 - 100, Default: 0)
                          3765 RPM


2 (2):Radeon RX 570 Series
               PCI BusId: 3
           PCI Id Device: 0
        PCI Id SubDevice: 0xC5701682
          Subvendor Name: XFX
       Overdrive Version: OverdriveN
       Current CoreSpeed: 300 MHz
     Current MemorySpeed: 300 MHz
     Current Utilization: 0 %
         Current Voltage: 0 mV
          Current Power:  6 W
            Current Temp: 33 °C

              PowerLimit: 0 %, (0 - 0, Default: 0)
               TempLimit: 90 °C, (0 - 0, Default: 0)
           FanTargetTemp: 75 °C, (0 - 0, Default: 0)
            FanTargetMax: 3000 RPM, (0 - 0, Default: 0)
                FanSpeed: 100 %, (0 - 100, Default: 0)
                          4263 RPM


3 (3):Radeon RX 570 Series
               PCI BusId: 5
           PCI Id Device: 0
        PCI Id SubDevice: 0xC5701682
          Subvendor Name: XFX
       Overdrive Version: OverdriveN
       Current CoreSpeed: 300 MHz
     Current MemorySpeed: 300 MHz
     Current Utilization: 0 %
         Current Voltage: 0 mV
          Current Power:  7 W
            Current Temp: 33 °C

              PowerLimit: 0 %, (0 - 0, Default: 0)
               TempLimit: 90 °C, (0 - 0, Default: 0)
           FanTargetTemp: 75 °C, (0 - 0, Default: 0)
            FanTargetMax: 3000 RPM, (0 - 0, Default: 0)
                FanSpeed: 100 %, (0 - 100, Default: 0)
                          4117 RPM

starting GrinPro.io miner..
*******************************************************
HTML Dashboard at http:/localhost:5777
JSON API listening on http://localhost:5777/api
         (Both also available over network)
         (API docs: https://grinpro.io/api.html)
*******************************************************
Init started for gpu 0 - Ellesmere
Init completed for gpu 0 - Ellesmere with SUCCESS
Init started for gpu 1 - Ellesmere
Init completed for gpu 1 - Ellesmere with SUCCESS
Init started for gpu 2 - Ellesmere
Init completed for gpu 2 - Ellesmere with SUCCESS
Init started for gpu 3 - Ellesmere
Init completed for gpu 3 - Ellesmere with SUCCESS
INFO    Connected to node grin29.f2pool.com.
INFO    Stratum grin29.f2pool.com:13654 login ok
--------------------------------------------------------------------------------
Shares (sub/acc/rej): 0/0/0    Last share:     4 seconds
--------------------------------------------------------------------------------
GPU 0  : Ellesmere            STARTING     Mining at  0.00 gps  Solutions: 0
       Last Message: 12:58:15:  Waiting for job....
GPU 1  : Ellesmere            STARTING     Mining at  0.00 gps  Solutions: 0
       Last Message: 12:58:16:  Waiting for job....
GPU 2  : Ellesmere            STARTING     Mining at  0.00 gps  Solutions: 0
       Last Message: 12:58:15:  Waiting for job....
GPU 3  : Ellesmere            STARTING     Mining at  0.00 gps  Solutions: 0
       Last Message: 12:58:15:  Waiting for job....
--------------------------------------------------------------------------------
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
ERROR   Listen errorUnable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
WARNING Worker 2 terminated, restarting...
WARNING Worker 1 terminated, restarting...
WARNING Worker 0 terminated, restarting...
WARNING Worker 3 terminated, restarting...
-