[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 259.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: slysir on November 02, 2018, 07:39:04 AM

Quote from: patrike on November 02, 2018, 04:21:16 AM

Quote from: slysir on October 31, 2018, 03:33:02 PM

On a few of my miners (2 out of 11) the NVidia drivers version shown in the Summary tab is not showing the most recent installed version.

I have installed NVidia version 416.34 as reported in Device Manager and by MSI Afterburner but the Summary tab shows older versions.

Awesome Miner is reading the version numbers from the Registry:
HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}

Can you see if there are multiple entries here with different version numbers? Awesome Miner might pick the first one.

First entry is 0000 - Intel Driver
2nd entry 0001 is correct - Nvidia DriverVersion 25.21.14.1634
last entry 0005 is what is shown in Summary - 23.21.13.91.24

In my second case AM picks the first entry from 0000, but the correct entry is from entry 0004.

Thanks for sharing the details. I assume that both 0001 and 0005 had a property called "ProviderName" set to nvidia in this case. What I will do for the next version is to look not only for one entry saying "nvidia", but actually selecting the one with the highest version number - assuming this is the correct one.

GoRdiE

newbie

Activity: 162

Merit: 0

Quote from: moppidoo on November 03, 2018, 07:22:05 PM

Quote from: GoRdiE on November 03, 2018, 08:42:36 AM

Hi all, I'm a little thick Huh

How can I do to put a miner exclusively in a pool with autoswitch in AM and another in another pool with autoswitch? I try to put only one in zpool and another one in blazepool but I do not know how to do Embarrassed

Hi,

1. Make sure online services are enabled for all the pools you want to use.

2. Right-click miner -> Edit Profit profile...

-> Override Tab
-> Profile specific pool settings -> Tick "Override global profit switching pools
-> Tick to enable all the online service(s) you want to use with this profile (including custom pool (groups) where applicable)

If you do not tick anything apart from the Override global profit switching pools, there will be no pools enabled for this miner profile.

hope this is what you are looking for

Hi moppidoo, but no works.

I like one miner with auto switching only in Zpool, and another only in Blazepool. Both of them with profit switching but each one in a different pool. If I uncheck some pool in Options, then no switch. Override pool settings only works for a wallet or user change. If I check both of them in Options but only one in Override, it does not work. Will it be possible?

EDIT. I'm silly. You were right. The change is in the profile, not in Properties-> Override pool settings

Thanks a lot moppidoo

mikeywith

legendary

Activity: 2394

Merit: 6581

be constructive or S.T.F.U

So i am a satisfied user of awesome miner, last night i wanted to purchase another license since i loaded more miners , and then i found out that bitcoin payment is no longer an option!.

it is a little strange here, Awesome MINER does not accept crypto for payment ! and we are still waiting for mass adoption Shocked

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: ?? on ??

Hi Patrike,

i think there's a big problem with PHI2 algo, profit switching doesn't work,
and "phi2 pool Block Masters" there's on tab "Online Services", but
there isn't in "View Detailts - Profit Switching".

P.S. I'm using Teamredminer!

Bye

in profit profile, make sure the following:

Mining software priority list -> Check TeamRedMiner
Customize -> Algorithms -> make sure phi2 is checked

Then Options -> Online Services -> make sure the predefined online services you want to use has phi2 included in the profit switching column as "Yes" (in your case, Block Masters?)

Options -> Profit Switching -> Make sure you have enabled Block Masters and populate the Bitcoin address field

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: GoRdiE on November 03, 2018, 08:42:36 AM

Hi all, I'm a little thick Huh

How can I do to put a miner exclusively in a pool with autoswitch in AM and another in another pool with autoswitch? I try to put only one in zpool and another one in blazepool but I do not know how to do Embarrassed

Hi,

1. Make sure online services are enabled for all the pools you want to use.

2. Right-click miner -> Edit Profit profile...

-> Override Tab
-> Profile specific pool settings -> Tick "Override global profit switching pools
-> Tick to enable all the online service(s) you want to use with this profile (including custom pool (groups) where applicable)

If you do not tick anything apart from the Override global profit switching pools, there will be no pools enabled for this miner profile.

hope this is what you are looking for

GoRdiE

newbie

Activity: 162

Merit: 0

Hi all, I'm a little thick Huh

How can I do to put a miner exclusively in a pool with autoswitch in AM and another in another pool with autoswitch? I try to put only one in zpool and another one in blazepool but I do not know how to do Embarrassed

GoRdiE

newbie

Activity: 162

Merit: 0

@patrike

There is a pool, https://fairpool.pro with autoexchange. It's the same guy who owns https://fairmine.pro/. There are only a few minersand a few algos, but I've been mining a lot in Fairpool and I've never had any problems. It's a small pool but maybe it's an option to add.

Thanks

Dalba

newbie

Activity: 92

Merit: 0

Quote from: patrike on November 02, 2018, 04:11:16 AM

Quote from: Dalba on October 31, 2018, 03:20:43 AM

Hello,
Is there a way to get coin balance from http://explorer.btcd.io for bitcoin diamond ?
I made some tests without success...

They didn't provide any API documentation, but by looking at the network requests made by the web browser, they use the following that can be entered as Block Explorer URL in Awesome Miner
http://20.184.13.116/v2/addr/[address]

Then it turns out that they report the balance in unites of "1E-7", so if you select the 1E-8 setting in Awesome Miner you will get a balance 10 times too low. I will add a new setting for selecting 1E-7 in the next release.

Thank you for your support !

Laugaricio

newbie

Activity: 6

Merit: 0

@darius510 has a good point.
You should consider adding this configuration @patrike.

darius510

newbie

Activity: 45

Merit: 0

Any possibility of adding Current Rev/Profit to the graph on the dashboard, or at least to the history collection? The hashrates arent helpful when you have multiple different models hashing at vastly different scales, and it's not really the #1 thing that matters anyway.

Allo-4ka

newbie

Activity: 71

Merit: 0

Quote from: patrike on November 02, 2018, 04:23:20 AM

SIA is very difficult to figure out balance for with the Block Explorers that has been available so far. Unless there is a block explorer that has an easy-to-use API where Awesome Miner can get the balance, it will not be supported.

hyperspace is available only this page
https://hyperstats.info/api

other forks do not have such services

slysir

newbie

Activity: 52

Merit: 0

Quote from: patrike on November 02, 2018, 04:21:16 AM

Quote from: slysir on October 31, 2018, 03:33:02 PM

On a few of my miners (2 out of 11) the NVidia drivers version shown in the Summary tab is not showing the most recent installed version.

I have installed NVidia version 416.34 as reported in Device Manager and by MSI Afterburner but the Summary tab shows older versions.

Awesome Miner is reading the version numbers from the Registry:
HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}

Can you see if there are multiple entries here with different version numbers? Awesome Miner might pick the first one.

First entry is 0000 - Intel Driver
2nd entry 0001 is correct - Nvidia DriverVersion 25.21.14.1634
last entry 0005 is what is shown in Summary - 23.21.13.91.24

In my second case AM picks the first entry from 0000, but the correct entry is from entry 0004.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: baf28 on November 02, 2018, 01:05:46 AM

Please add the total power consumption for the algorithm to the coins and Online Services tab, just like the common hashrate.
Thank.

Thanks for the suggestion - this will be included in the next release.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: tf2addict on November 01, 2018, 02:32:43 PM

Any hints or tips on setting up A.M. for SRBMiner auto switching on MoneroOcean pool? I have SRBMiner auto switching working through the config files and start-algo-switching.bat file of SRBMiner but now I'm trying to figure out the best way to use A.M. to run this.

EDIT: I got it working by setting the command line in A.M. to the same as what's in the start-algo-switching.bat file and overriding the v8 config and blanking it out. Works ok but is there a better way? The biggest drawback here is every time A.M. has a new version of SRBMiner I will have to manually update some of the files on the miner such as the pools list and algos.txt

Please consider how to add better support for SRBMiner's auto switching to A.M.!

Thanks for the update. It's a quite mining software specific feature we have here, so I'm not sure if it this feature is popular enough to justify the implementation time required to support it.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Allo-4ka on October 31, 2018, 03:39:30 PM

patrike
After the SIA fork, three coins were added, the site has an API (including the API market place)
I could not get the balance API
https://siamining.com/chains

algo blake2b

Thanks for the update.

SIA is very difficult to figure out balance for with the Block Explorers that has been available so far. Unless there is a block explorer that has an easy-to-use API where Awesome Miner can get the balance, it will not be supported.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: slysir on October 31, 2018, 03:33:02 PM

On a few of my miners (2 out of 11) the NVidia drivers version shown in the Summary tab is not showing the most recent installed version.

I have installed NVidia version 416.34 as reported in Device Manager and by MSI Afterburner but the Summary tab shows older versions.

Awesome Miner is reading the version numbers from the Registry:
HKLM\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}

Can you see if there are multiple entries here with different version numbers? Awesome Miner might pick the first one.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Ferguson33 on October 31, 2018, 07:57:31 AM

Quote from: Laugaricio on October 31, 2018, 04:49:10 AM

Quote from: Ferguson33 on October 31, 2018, 03:54:50 AM

Thanks for the reply...
I try, but it does not work.

Rules -->User defined rules --> Add

Triggers --> Miner Revenue --> Less Then or Equals --> 2,3 Eu --> 60s
Actions --> Execute remote command --> Miner Command --> Shutdown.exe parrametrs /s NOT WORK
or
Action --> Execute remote command --> Miner Command --> Stop miner NOT WORK

Please for help !

Use miner profit instead miner revenue.
[Miner profit = Miner revenue - power cost (if configured)]

I understand that...
Miner stop/start work but shutdown not work....

Hi,
1) Please verify that the rule is enabled (the checkbox is checked)
2) Could you send me a few screenshots (via mail) of this trigger configuration and the miner list where the revenue/profit is being display?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Dalba on October 31, 2018, 03:20:43 AM

Hello,
Is there a way to get coin balance from http://explorer.btcd.io for bitcoin diamond ?
I made some tests without success...

They didn't provide any API documentation, but by looking at the network requests made by the web browser, they use the following that can be entered as Block Explorer URL in Awesome Miner
http://20.184.13.116/v2/addr/[address]

Then it turns out that they report the balance in unites of "1E-7", so if you select the 1E-8 setting in Awesome Miner you will get a balance 10 times too low. I will add a new setting for selecting 1E-7 in the next release.

baf28

newbie

Activity: 117

Merit: 0

Please add the total power consumption for the algorithm to the coins and Online Services tab, just like the common hashrate.
Thank.

tf2addict

full member

Activity: 675

Merit: 100

Any hints or tips on setting up A.M. for SRBMiner auto switching on MoneroOcean pool? I have SRBMiner auto switching working through the config files and start-algo-switching.bat file of SRBMiner but now I'm trying to figure out the best way to use A.M. to run this.

EDIT: I got it working by setting the command line in A.M. to the same as what's in the start-algo-switching.bat file and overriding the v8 config and blanking it out. Works ok but is there a better way? The biggest drawback here is every time A.M. has a new version of SRBMiner I will have to manually update some of the files on the miner such as the pools list and algos.txt

Please consider how to add better support for SRBMiner's auto switching to A.M.!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 259. (Read 703148 times)