Author

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 267. (Read 703148 times)

legendary
Activity: 3346
Merit: 1094
Thanks for letting me know. I've had many requests about adding support for this software so it's high on the todo-list right now.
legendary
Activity: 3346
Merit: 1094
For those mining Monero:

JCE Cryptonote CPU Miner Update to version 0.33 or later before the V8 fork of 18-October-2018.

Also update to Cast XMR Version 1.5.0. Support for the Monero V8 Network Upgrade which introduces a new CryptoNight variant CryptoNightV8 aka CNv2. The Monero V8 update is scheduled for 18th

JCE and CastXMR will be part of the next Awesome Miner release that soon will be made available.
legendary
Activity: 3346
Merit: 1094
Hi Patrike

I think you removed XMR-STAK from AM a few months back, but they continued to develop it, I would to know if it's possible to you to add it again in AM, I saw improvements around 20% more hashrate with this miner using Cryptonight algos compared to XMRIG.

https://github.com/fireice-uk/xmr-stak/releases

Thanks in advance! And continue your great work!
Thanks!

XMR-Stak has only been supported as an External Miner. Earlier it was too complex to setup the configuration for Awesome Miner for this mining software, which is the reason it wasn't supported as a Managed Miner. It might be possible to support in the future.
legendary
Activity: 3346
Merit: 1094
We have over 100 miners at our location. I want to create a rule so I get a single notification if 10 or more miners are offline all at the same time. How do I do that?

Thanks
There are no built-in triggers that can handle the scenario you describe.

It might be possible to resolve with a C# script trigger - but I need to get back to you on this because I don't have any ready solution for it.
legendary
Activity: 3346
Merit: 1094
Great product and support, keep up the good work.

I just wanted to suggest a "nice to have" feature for future consideration.  It would be nice to have a statistic for profit margin (daily profit / daily revenue), which could then be used in rules.  E.g.: If profit margin is less than 10%, stop miner.
Thanks for the feedback.

There is a similar feature you can configure via the rules in Awesome Miner:
https://support.awesomeminer.com/support/solutions/articles/35000085907-rules-detect-mining-issues-and-automate-tasks
Please see the last two examples on the link above.
legendary
Activity: 3346
Merit: 1094
patrike

Problems continue in the network, and as a result, the reported profit is  750k $ / month!!!!!
I suggest either to highlight this problematic coin in color, or to hide it on the “Coins” tab until you solve problems in the network.
http://images2.imagebam.com/03/e2/bd/8095981002744754.PNG
I wasn't able to catch exactly what CoinWarz was reporting during this period of time, but I do understand you point about that the end result wasn't correct. There is no specific information in their API's that can inform Awesome Miner about their blockchain sync issues for a specific coin.
legendary
Activity: 3346
Merit: 1094
Anyone notice Zpool reporting wrong profit on Equihash?  Had my 8x1080ti earning $49 PER day. How can we check this?
Most likely they changed their reporting from mBTC/MHs to mBTC/GHs or something like that.
In this case I think it was a temporary issue with a profit number in their API.

For all the Yiimp-based pools, Awesome Miner can since a few months ago automatically understand when they make a change from MH to GH reporting for example. This is part of their API reporting these days.
legendary
Activity: 3346
Merit: 1094
I don't see QRL coin as an available choice any more?  Wasn't it in there before?  It's CryptoNight-V7, right?
It's no longer part of the main lists on WhatToMine and CoinCalculators. You can probably add the JSON URL for it manually in the Options dialog, Statistics Proviers section.
legendary
Activity: 3346
Merit: 1094

Very good update, please do not forget the OC of the RTX

"cryptopia,graviex,crex24,cryptobridge,hitbtc,coinexhange"

Many and good features for CC, I have left an exchante filter line above, is that correct? or I should add the .com or similar.

I liked being able to delimit the Exchanges, I love the 3 hours, I work always in current because 24 is very excessive, it seems very adequate 3 hours.

Could you tell me if I placed the filter correctly?


Although all these developments are great, it is only for CC. I still think that getting the prices of the exchanges prices and choosing in each currency the exchange and high or low price, would be just perfect, but these advances help a lot, thanks for being a developer that listens to both the community.

Do not forget Shittomine, that would be bestial.

Thank you very much for everything @Patrike, I really appreciate your delivery to the project.
Thanks for your nice feedback.

Right now the filtering of exchanges requires you to know the name of the exchange as listed in the CoinCalculators.io API. See:
https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000

It's not case sensitive, but otherwise you need to list the same like in the API response above. The only incorrect entry in your example was "coinexhange". That one is not matching anything in the API. Otherwise your example with multiple exchange names looked fine.

To answer your question about the order - the order you list the entries are not relevant. You can use any order because Awesome Miner is simply filtering based on the exchanges you list. If you list "cryptopia" and "graviex", Awesome Miner will look at which one of these two have the highest price and give you that highest price. If another exchange has an even higher price, it will be ignored if not part of your filter. If a coin isn't listed on any of these exchanges, Awesome Miner will give you the price of zero, because none of the exchanges you put in your filter is supporting this coin.

The idea with the filtering is that you should only enter the few exchanges you have an interest in using.



Your other requests have not been forgotten - I always take notes of good and important suggestions and constantly work on improving the software based on this. Thanks!


PAtrike would be ideal if you could specify the Exchange in each currency. Because if it is in several and I will give the highest, there is still a mini problem. If at least there was an order of importance as I said before, that if in the line I put before Crex24 that Graviex, heed the order, I could help and not have to do anything in each currency. But if you can not, your thing is that each currency has a field to specify the exchange of CC
Can you explain this scenario about Exchanges per coin a bit more?

The concept right now is that you enter a few exchanges like Cred24 and Graviex, and then you will only be presented with the rates for those two exchanges. The use case for this is that you probably only have accounts on a few exchanges and then it doesn't make sense to get exchange rates from the others. This scenario is fully supported.

With a way of defining Exchanges per coin, would that be if you only want to sell your XMR on Cred24 and only ETH on Graviex for example? Or what would the main benefit be of that detailed level of configuration of exchanges?
newbie
Activity: 31
Merit: 0
newbie
Activity: 52
Merit: 0
For those mining Monero:

JCE Cryptonote CPU Miner Update to version 0.33 or later before the V8 fork of 18-October-2018.

Also update to Cast XMR Version 1.5.0. Support for the Monero V8 Network Upgrade which introduces a new CryptoNight variant CryptoNightV8 aka CNv2. The Monero V8 update is scheduled for 18th
newbie
Activity: 31
Merit: 0
Hi Patrike

I think you removed XMR-STAK from AM a few months back, but they continued to develop it, I would to know if it's possible to you to add it again in AM, I saw improvements around 20% more hashrate with this miner using Cryptonight algos compared to XMRIG.

https://github.com/fireice-uk/xmr-stak/releases

Thanks in advance! And continue your great work!
newbie
Activity: 3
Merit: 0
We have over 100 miners at our location. I want to create a rule so I get a single notification if 10 or more miners are offline all at the same time. How do I do that?

Thanks
newbie
Activity: 11
Merit: 0
Great product and support, keep up the good work.

I just wanted to suggest a "nice to have" feature for future consideration.  It would be nice to have a statistic for profit margin (daily profit / daily revenue), which could then be used in rules.  E.g.: If profit margin is less than 10%, stop miner.
newbie
Activity: 71
Merit: 0
patrike

Problems continue in the network, and as a result, the reported profit is  750k $ / month!!!!!
I suggest either to highlight this problematic coin in color, or to hide it on the “Coins” tab until you solve problems in the network.
http://images2.imagebam.com/03/e2/bd/8095981002744754.PNG

hero member
Activity: 1151
Merit: 528
Anyone notice Zpool reporting wrong profit on Equihash?  Had my 8x1080ti earning $49 PER day. How can we check this?
Most likely they changed their reporting from mBTC/MHs to mBTC/GHs or something like that.
jr. member
Activity: 61
Merit: 2
Anyone notice Zpool reporting wrong profit on Equihash?  Had my 8x1080ti earning $49 PER day. How can we check this?
full member
Activity: 675
Merit: 100
I don't see QRL coin as an available choice any more?  Wasn't it in there before?  It's CryptoNight-V7, right?
jr. member
Activity: 756
Merit: 2

Very good update, please do not forget the OC of the RTX

"cryptopia,graviex,crex24,cryptobridge,hitbtc,coinexhange"

Many and good features for CC, I have left an exchante filter line above, is that correct? or I should add the .com or similar.

I liked being able to delimit the Exchanges, I love the 3 hours, I work always in current because 24 is very excessive, it seems very adequate 3 hours.

Could you tell me if I placed the filter correctly?


Although all these developments are great, it is only for CC. I still think that getting the prices of the exchanges prices and choosing in each currency the exchange and high or low price, would be just perfect, but these advances help a lot, thanks for being a developer that listens to both the community.

Do not forget Shittomine, that would be bestial.

Thank you very much for everything @Patrike, I really appreciate your delivery to the project.
Thanks for your nice feedback.

Right now the filtering of exchanges requires you to know the name of the exchange as listed in the CoinCalculators.io API. See:
https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000

It's not case sensitive, but otherwise you need to list the same like in the API response above. The only incorrect entry in your example was "coinexhange". That one is not matching anything in the API. Otherwise your example with multiple exchange names looked fine.

To answer your question about the order - the order you list the entries are not relevant. You can use any order because Awesome Miner is simply filtering based on the exchanges you list. If you list "cryptopia" and "graviex", Awesome Miner will look at which one of these two have the highest price and give you that highest price. If another exchange has an even higher price, it will be ignored if not part of your filter. If a coin isn't listed on any of these exchanges, Awesome Miner will give you the price of zero, because none of the exchanges you put in your filter is supporting this coin.

The idea with the filtering is that you should only enter the few exchanges you have an interest in using.



Your other requests have not been forgotten - I always take notes of good and important suggestions and constantly work on improving the software based on this. Thanks!



I leave here the list of exchanges supported by CC and its exact name, this contribution will help to choose the Exchanges better, you know what they are and how they are written. It does not matter the uppercase and lowercase.

Stocks.Exchange
SouthXchange
TradeSatoshi
Cryptopia
CryptoBridge
Crex24
Bittrex
HitBTC
TradeOgre
Binance
Bittrex
Graviex
Livecoin
Exrates.me
Bit-Z
Btc-Alpha
Poloniex


PAtrike would be ideal if you could specify the Exchange in each currency. Because if it is in several and I will give the highest, there is still a mini problem. If at least there was an order of importance as I said before, that if in the line I put before Crex24 that Graviex, heed the order, I could help and not have to do anything in each currency. But if you can not, your thing is that each currency has a field to specify the exchange of CC
legendary
Activity: 3346
Merit: 1094
Awesome Miner version 5.7.1

 
 Features and integration
  - CoinCalculators.io integration includes exchange rate support for Highest Bid and Lowest Ask (configurable in the Options dialog, Statistics Providers)
  - CoinCalculators.io integration includes exchange filter setting, to specify that only specific exchanges should be used when presenting the coin price
  - CoinCalculators.io integration improved by allowing configuration of coin difficulty (current, 3h, 6h or 24h)
  - Removed support for Zergpool because they have discontinued their services
 

Hi, patrike. Great features and great support, as always.

I think, you can show in Coins->Exchange Rate two more parameters. The exchange from which the data are taken and the volume.

Well, we can choose the Highest Bid or the Lowest Ask (actual and realistic price) but if you reflected the volume in the exchange (and the exchange) , we would be able to better evaluate this information.

It is not difficult because the information you already have, but it would force you to rethink the graphic design of the section.

Thanks for your awesome support. Without a doubt, AM is the reference mining management program
Thanks!

I agree that the Coins tab should include more of this information. Especially the name of the exchange must be listed in order to make sense of the new settings. I will improve this soon.
Jump to: