[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 293.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: jkminkov on August 11, 2018, 12:42:00 PM

how to run a batch file as administrator, setting power limit when temp exceeds a threshold, I think I saw that in release notes, but I don't see it in rules.

The feature is currently only available when you manually select a miner, go to the System tab at the bottom of the screen and then using the "Execute remote command" button.

1) I do have an implementation in the pipeline for a "run as admin" setting for the batch commands configured per miner/profile.

2) I can also go ahead and expose the same feature via the rules. You can expect it to be available via the action "Miner command", where I will add a new command type like "Execute remote command with Administrator privileges".

I will make sure that both #1 and #2 make it to the next update.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: zaqwsx on August 11, 2018, 11:56:19 AM

Quote from: patrike on August 11, 2018, 09:57:23 AM

You can also expect an early Beta version of Remote Agent for Linux within the next few weeks.

With the appropriate miners?

Right now I've implemented auto-download for about 10 of the mining software when you run on Linux. All mining software doesn't support Linux, and in other cases I simply not had the time to manually compile them where no binaries are available.

I think this still can be a good starting point as I don't know the exact interest for running Remote Agent on Linux yet.

Regulater

member

Activity: 273

Merit: 12

Anyway to fix the benchmarking issue. I cannot save any benchmarks to my profiles, and for some reason the benchmarks are showing different hashrates on the benchmark than when running. Maybe a way to upload the save to clipboard and use that if it doesnt want to save to the profile.

jkminkov

hero member

Activity: 698

Merit: 500

how to run a batch file as administrator, setting power limit when temp exceeds a threshold, I think I saw that in release notes, but I don't see it in rules.

zaqwsx

jr. member

Activity: 58

Merit: 5

Quote from: patrike on August 11, 2018, 09:57:23 AM

You can also expect an early Beta version of Remote Agent for Linux within the next few weeks.

With the appropriate miners?

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner Version 5.3.11 (Development preview of 5.4)

The main content for this update (compared to 5.3.10):

1) Performance improvements in general and performance improvements related to when the profit switcher is making decisions, to make the user interface run smoother when you have a larger number of profit profiles

2) Avalon ASIC miners can be monitored individually even when Awesome Miner is connected to a controller with multiple miners. This can be configured via the External Miner Properties, Advanced section.

The public release 5.4 will be made available within the next few days.

You can also expect an early Beta version of Remote Agent for Linux within the next few weeks.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on August 11, 2018, 08:57:27 AM

Quote from: patrike on August 10, 2018, 02:56:19 AM

Quote from: trucobit on August 10, 2018, 12:35:28 AM

https://www.dropbox.com/s/gwoax04u7dg5hec/Captura%20de%20pantalla%202018-08-10%20a%20las%207.28.03.png?dl=0

Hi @Patrike, I already informed you a few days ago that when mino nichehash, the profit is not shown in real time. If it appears in online services, and it does the switch auto, it is a pain to not see the profit in real time and therefore I do not have the mini profit statistics either.

I have waited to install the last update, but it has not been fixed. I ask for your help because I do not know where this fault comes from, even though I look at options I do not see anything that I can affect

I keep mining with nicehash and other pools, but it's a pain to not see the profit of nicehash. I have asked in my Telegram group and it only happens to me.

Can you check your Awesome Miner log file for connection issues to Nicehash? You can search for:
api.nicehash.com

Also make sure that in the Options dialog, Online Services section, you don't have any but the default value for Nicehash domain matching:
nicehash.com

https://www.dropbox.com/s/pwzfu9eqjzpg74a/Captura%20de%20pantalla%202018-08-11%20a%20las%2015.47.21.png?dl=0

https://www.dropbox.com/s/jzyvp2qalrbi1sn/AwesomeMiner-20180808_0120.log?dl=0

As I do not know what to look for, I leave you a screenshot of the configuration of online services, and I also leave a log for today, where nicehash appears several times, but I do not know if it is good or bad.

I do not know if it will influence, I chose Europe on the server.

Thanks for the details. For the screenshot, I was thinking of the field "Nicehash domain matching" that is located just a few pixels above your screenshot on the same page. Does that one say exactly the following?
nicehash.com

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: darius510 on August 10, 2018, 08:06:54 PM

Would it be possible to add mBTC or bits to the display currency? Ideally I'd like to be able to display revenue/profit in both mBTC and USD at the same time. Even better if that can be done on the web dashboard as well.

Right now you can only have a single display currency (either BTC or USD can be selected in the Option sdialog, Coins&Profit section). I've had some similar requests for showing both, so it might be supported later on.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: johnreese5895 on August 11, 2018, 07:39:41 AM

Hi is there any possible way to save all settings and reload them after a system reset.

Yes. Awesome Miner stores all configuration in the file ConfigData.xml located in the folder %appdata%\AwesomeMiner.

You can backup / restore this file as long as Awesome Miner isn't running at the same time.

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on August 11, 2018, 05:54:20 AM

Documentation updated
The documentation/support section on the Awesome Miner web site has been improved. The new support pages can be found at https://support.awesomeminer.com/ and everything is now searchable to make it easier to find information.

Several of the pages have been updated and the work on improving the documentation will continue. Please let me know if you have any feedback.

Later on the support site will also be extended to include a forum where everyone can post feature suggestions and vote for features.

Perfect more and new documentation, although I do not have time for Scrypt and apis, it is always good to have everything at hand to consult.

A proper forum is the best thing you can do for your product and maintain both the bitcointalk and your own. It will always be easier to find information faster and more help in a forum often visited by the most experts in the program. Of course a great point in favor of the brand.

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on August 10, 2018, 02:56:19 AM

Quote from: trucobit on August 10, 2018, 12:35:28 AM

https://www.dropbox.com/s/gwoax04u7dg5hec/Captura%20de%20pantalla%202018-08-10%20a%20las%207.28.03.png?dl=0

Hi @Patrike, I already informed you a few days ago that when mino nichehash, the profit is not shown in real time. If it appears in online services, and it does the switch auto, it is a pain to not see the profit in real time and therefore I do not have the mini profit statistics either.

I have waited to install the last update, but it has not been fixed. I ask for your help because I do not know where this fault comes from, even though I look at options I do not see anything that I can affect

I keep mining with nicehash and other pools, but it's a pain to not see the profit of nicehash. I have asked in my Telegram group and it only happens to me.

Can you check your Awesome Miner log file for connection issues to Nicehash? You can search for:
api.nicehash.com

Also make sure that in the Options dialog, Online Services section, you don't have any but the default value for Nicehash domain matching:
nicehash.com

https://www.dropbox.com/s/pwzfu9eqjzpg74a/Captura%20de%20pantalla%202018-08-11%20a%20las%2015.47.21.png?dl=0

https://www.dropbox.com/s/jzyvp2qalrbi1sn/AwesomeMiner-20180808_0120.log?dl=0

As I do not know what to look for, I leave you a screenshot of the configuration of online services, and I also leave a log for today, where nicehash appears several times, but I do not know if it is good or bad.

I do not know if it will influence, I chose Europe on the server.

johnreese5895

newbie

Activity: 56

Merit: 0

Hi is there any possible way to save all settings and reload them after a system reset.

patrike

legendary

Activity: 3346

Merit: 1094

Documentation updated
The documentation/support section on the Awesome Miner web site has been improved. The new support pages can be found at https://support.awesomeminer.com/ and everything is now searchable to make it easier to find information.

Several of the pages have been updated and the work on improving the documentation will continue. Please let me know if you have any feedback.

Later on the support site will also be extended to include a forum where everyone can post feature suggestions and vote for features.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: moppidoo on August 10, 2018, 09:33:05 PM

Quote from: Austpool on August 10, 2018, 07:37:42 PM

ok, so in this time of dropping incomes and high power costs, i'm wondering if an option can be added to only run mining during certain times?

as in, add an option to set operating hours. e.g. (only mining between these hours. start time 8am stop time 4pm) for those of use in high power cost areas with solar systems that can feed miners during the day.

i for one can't afford to run my rigs at these incomes with my high power costs. so, i'd love the ability to auto set sun up, sun down times to run on my generated free power times.

just a thought.

Hi,

Have you tried to use the Options -> Rules feature, there are time/scheduling triggers that can potentially achieve what you wanted

I case there is a need for an example of how to configure this, please see "Example: Run GPU mining during a specific time" in the Rules documentation

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: O-Coin on August 10, 2018, 12:30:35 PM

Cryptonight Profit Pool payout only in XMR. moneroocean.stream

Anyone ever use/configure this pool?
@Patrike

I don't have any experience in this pool, but it should be possible to add like any other pool in Awesome Miner based on the pool URL's and ports they provide on their web site and in their FAQ. Let us know if you run into any issues.

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: Marvell2 on August 10, 2018, 10:26:50 PM

Im mining just on all the default pools that you configure when you add a miner

I had a full rig of 1070ti , and another mixed rig Il try setting up profiles for both

Quote from: Regulater on August 11, 2018, 02:45:46 AM

Each righ was precise benchmarked and i am using Zerg, MPH, and NH. The rigs get stuck on X16R until disabled, then stuck on Lyra2z. Never switches. 3 minute intervals and 5% difference (lowered the difference from 15%) and still no switching. 8x1070 and 8x1080ti rigs.

Right click miner -> View Details, calculated result is consistent with what the miner is mining and reasonable?

I'm also guessing you are using Options -> Statistics -> you are using 24 hour estimates?

RVN difficulty dropped for a while during the last 48 hours and might have inflated that estimated figure even though the party was already over. The averaging on Yiimp pool estimates always gets inflated, each time a block is found for the algo port, it can skew the estimate fairly dramatically.

Regulater

member

Activity: 273

Merit: 12

Quote from: moppidoo on August 10, 2018, 09:09:02 PM

Quote from: Regulater on August 10, 2018, 08:39:23 PM

Quote from: Marvell2 on August 10, 2018, 08:36:25 PM

something is definitely off with the miner, on my 1070 rig its mining x16r , but eth is currently more profitable

I set no power params , eth plus any orher algo would be even more profitable but it innists on mining x16r

seems way off to me , 3 hrs benchmarking for nothing

This is what is happening to me. X16R Raven is not profitable at all, actually a loss for mining. Remove it then it gets stuck on lyra2z, cant get it to switch when other algos are more profitable.

Hi @Marvell2, @Regulater,

What pools are you mining with, switch interval, any particular pool(s) your miners gets stuck?

most importantly, right click on miners and what does the "View Details" list says as opposed to what the miners are mining?

Each righ was precise benchmarked and i am using Zerg, MPH, and NH. The rigs get stuck on X16R until disabled, then stuck on Lyra2z. Never switches. 3 minute intervals and 5% difference (lowered the difference from 15%) and still no switching. 8x1070 and 8x1080ti rigs.

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: moppidoo on August 10, 2018, 09:09:02 PM

Quote from: Regulater on August 10, 2018, 08:39:23 PM

Quote from: Marvell2 on August 10, 2018, 08:36:25 PM

something is definitely off with the miner, on my 1070 rig its mining x16r , but eth is currently more profitable

I set no power params , eth plus any orher algo would be even more profitable but it innists on mining x16r

seems way off to me , 3 hrs benchmarking for nothing

This is what is happening to me. X16R Raven is not profitable at all, actually a loss for mining. Remove it then it gets stuck on lyra2z, cant get it to switch when other algos are more profitable.

Hi @Marvell2, @Regulater,

What pools are you mining with, switch interval, any particular pool(s) your miners gets stuck?

most importantly, right click on miners and what does the "View Details" list says as opposed to what the miners are mining?

Im mining just on all the default pools that you configure when you add a miner

I had a full rig of 1070ti , and another mixed rig Il try setting up profiles for both

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: zaqwsx on August 10, 2018, 10:34:37 AM

Quote from: patrike on August 10, 2018, 10:04:22 AM

Quote from: wildzer0 on August 10, 2018, 06:00:23 AM

A feature suggestion: "Auto Benchmark":

User selects profile and precision, AM then starts to benchmark all algorithms (like 'Select All' in the benchmark window). After it has finished benchmarking, it will save the results to the profile and automatically start mining using the new results.

Maybe a window with a summary of the results could be added too.

That could make sense for the initial benchmark. The future plan also to let Awesome Miner automatically update the profile hashrates while you are mining, to minimize the need of benchmarking.

This could bring some problems. For example x16r/x16s hashrate fluctuates a lot, other algorithms need some time to catch their real speed and when the profit switching is set to short time problems will pop. Keeping this in mind, I will suggest to let the miner to run for 15 min before the hash is taken in to consideration or even better set this time as parameter.

Btw, this is the way I bench my self. I set all the algorithm's hashrate to 1TH and let them pop one after another while saving their real hashrates to the profile.

My thoughts too, and that's exactly how I've been benchmarking lately. like @Austpool (perhaps fellow Down Under Dweller?), my mining is heavily impacted by high electricity costs, and like @Finnsk3 and @trucobit have pointed out, that currently AM lacks and could use a very important feature is to log performance values into a database that can be analysed/presented in a well, useful manner for profit switching decision making (human and machine).

Not to mention x16r / x16s have fluctuating hashrates, now HEX have fluctuating power usage too, thus an average/median value must be obtained via longer running benchmarks for both Hashrate and PowerDraw, it's essential for us miners who with high electricity cost as a major (or only) factor which dictates profitability.

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: Austpool on August 10, 2018, 07:37:42 PM

ok, so in this time of dropping incomes and high power costs, i'm wondering if an option can be added to only run mining during certain times?

as in, add an option to set operating hours. e.g. (only mining between these hours. start time 8am stop time 4pm) for those of use in high power cost areas with solar systems that can feed miners during the day.

i for one can't afford to run my rigs at these incomes with my high power costs. so, i'd love the ability to auto set sun up, sun down times to run on my generated free power times.

just a thought.

Hi,

Have you tried to use the Options -> Rules feature, there are time/scheduling triggers that can potentially achieve what you wanted

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 293. (Read 703512 times)