Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 290. (Read 703512 times)

Ok. I just bought  an antminer s9 b22 with last firmware, very noisy,  does awesome miner configure frequency is working with this batch?

As I pointed out, those results were using the default Avalon reporting with the main error being the number of miners reported per AUC (Device). As the one set of sshots shows in 1 case the 2 AUC's are correctly reported but number of miners attached to them is not. For default Avalon display I'd either leave it as just reporting the # of AUC's (original way) or if miners attached is presented then needs to be the right#.

Using the Advanced Avalon config -- Perfect results. Visually now with top end of the graph at 15THs vs 50+THs is FAR easier to see a few THs drop from any 1 miner. Kudos for that

edit: Query, when using the Advanced Avalon config and reporting per-miner does the Restart button do a global restart of cgminer (all miners on controller) or just restart the 1 miner? Since the Avalon API does has provision for it the ability to actually reboot the individual miner would be nice.

how do I upgrade from the UI so I can add HEX ?

If each profile profile would allow a specific power cost to be specified, I assume that would improve the scenario you describe.

You can use a rule with the Detect Pool trigger, where you make it trigger if a specific pool is missing. The action would then be a "Miner Command" of the type Change Pool Group, where you point to a pool group with your 4 pools you want to use.

It looks like Awesome Miner isn't getting any API information from sgminer in this case.

Could you please send me the following (by e-mail or PM).

1) An API report via the toolbar Tools -> API Report
2) Start the miner with the Diagnostics button in the toolbar and copy the output

Thanks!

Good point.
As power cost is getting more and more important, I will make sure it will be possible to specify per Profit Profile in the next release.

Hi,
Is the username you enter the same user as you use to run Awesome Miner / Remote Agent on this account? It's not possible to specify any user account to use for this purpose.

Thanks for your feedback. This scenario is actually like in previous versions of Awesome Miner, where each of the "Avalon devices", not "Avalon devices status", listed in the web interface is represented as a device in the Awesome Miner ASIC tab.

The new implementation for Avalon must be enabled via the Properties of an External Miner, Advanced section. This will make the entire External Miner represent a single Avalon miner (instead of the entire controller).

What I will look into as well is to change the devices listed on the ASIC tab, as you pointed out with your screenshot. Instead of listing for example 2 "Avalon devies" like today, I could make it list all 6 "Avalon devices status" instead. Please note that this is only for the scenario where you use a single External Miner and looking at the entire controller. The main point with the new implementation was the new setting to make the entire External Miner represent a single miner.

Thanks for responding so quick re the Avalons
That said, there are now some new issues with them: When left in default (all on controller reported as 1 miner) the AISIC tab now is very inconsistent with what it reports...

bank of 6 A741's as reported from GUI

Same bank as reported by AM -- only 3 are reported


Bank of 4 841's as reported via GUI

Same bank as reported by AM


And a real winner, bank of 4 841 reported A7's...

Please complete statistics, earnings per protocol, changes per protocol, per pool  etc ... There are already many functions, at some point you have to begin to have more control over what we mine and the benefits that we report. Knowing if I make changes in my strategy is better or worse ... It is already necessary, it is basically what the program needs most now

http://i1243.photobucket.com/albums/gg557/sicktricky/AM%20miner1_zpshx6qcquu.jpg

http://i1243.photobucket.com/albums/gg557/sicktricky/AM%20miner1_zpshx6qcquu.jpg

Also I want to remind you about the installation of electricity costs for each asic / rig, because The systems are not in one place

I ask you to give a set of rules for automatically adding the 4th pool to the ant after rebooting

Thank you

Hi all,

Please, How to setup the msi afterburner remote server if logging into domain? I am having issues using only username or domain\username.. Not sure where the error is coming from. Folder is good and i even created admin user only for that and it stipp not succesfull.

Thanks!

Awesome Miner version 5.4

GPU mining
--- Added execution option to run external commands as Administrator via the System tab
--- Added option to reinitialize the GPU monitoring via the System tab
--- Use full paths when specifying configuration file to sgminer
--- For Managed Profit Miners, only the active pools will be listed on the Pools tab.
--- Batch commands can be configured to run with Administrator privileges
--- The Diagnostics dialog adds a feature for removing all downloaded mining software
ASIC mining
--- Improved Avalon ASIC miner support, where External Miners can be configured to display mining information for a single ASIC behind a controller
Configuration
--- The download URL for mining software adds support for pointing to network file shares.
--- Improved support for custom mining software with download URL specified as part of profit profiles
--- The profit switcher can be configured to ignore the current pool if the mining software crashed multiple times. Configurable via the Options dialog, Profit switching section.
--- Cloud Services update interval configurable
--- Ensure miner hostnames cannot contain blank spaces
Performance
--- Improved threading performance when using larger number of miners and when executing commands on many miners at once
--- Lower CPU usage during profit switching
--- Improved user interface responsiveness
Features and integration
--- WhatToMine custom URL's can point to sources with multiple coins
--- Disable MultiPool.us integration (no API available)
--- Zpool multiple region support
--- Added YescryptR16 and Allium algorithms, including support in CpuMiner-Opt
User interface
--- Coins tab improved by separating Revenue and Profit into two separate columns that can be sorted individually
--- More coin images included
--- All help links point to the new Awesome Miner Support web site
Rules
--- Miner Tag trigger can be configured to trigger if a miner doesn't have the specified tag
--- Webhook actions can be configured for Basic Authentication
--- Added variable support for webhook actions
--- Check statistics trigger allow hashrates to be specified with a unit like TH/s to make the configuration easier
--- The Miner Command action adds support for executing a remote command with Administrator privileges
--- The Miner Command action adds support for removing all downloaded mining software
Mining software
--- Removed old mining software: Excavator 1.1. The only supported versions from now on are Excavator 1.4 and 1.5.
--- Added mining software: T-Rex nVidia GPU Miner
--- T-Rex miner 0.5.7, including pool information when used as External Miner
--- CryptoDredge 0.8.3
--- Z-enemy Miner 1.15a with Hex algorithm support
--- EWBF Equihash Miner 0.5
--- SRBminer 1.6.6, including CryptoNight Red algorithm and the next concept for terminating the process when not working
--- BMiner 10.1
Corrections
--- Correction to coins per day calculations for some algorithms like Blake 2b
--- Correction to SRBMiner configuration file entries related to GPU settings
--- Correction to hash rate for latest firmware versions of Innosilicon A9 Zmaster miner. If an older firmware is used for this miner, please upgrade to the latest firmware version.
--- Correction to the content of the miner and pool notification messages if the mining process doesn't start correctly
--- Correction to miner commands not being executed correctly if launched in a sequence via the rules
--- Correction to incorrect display of first pool in list for some GPU mining software
--- Correction to rule for executing SSH commands
--- Correction to hashrate parsing for a few of the GPU mining software, where incorrect processing could result in no mining information being displayed
--- Correction to auto detection of Excavator miner 1.4 and 1.5
--- Minor corrections

Right now, a simple workaround is to clone the profit profile (for the hashrate) and adjust power draw to the percentage drop in accordance to your off-peak electricity rate vs peak rate, then simply add time triggers to switch miners to those profiles accordingly (so this is in a sense just like changing profit factor, except now you are changing the cost factor). It should work just fine for profit switching purposes. Of course, future ability to implement power cost per profile is obviously very welcome addition.

Could you provide a screenshot of the miner list in the main window of Awesome Miner, where also the Pools tab is selected at the bottom of the screen to make the pool URL visible? Thanks!

There are currently no feature to set two prices, but what I'm planning for later on is to allow you to define the power cost per profit profile, and then also allow the rules to set the power cost of a profile.

Already today you can use the Time-trigger to define when a rule should be executed, but you cannot set an interval. It would however make sense to support that as well.

Thanks for the feedback.

I just set the amd to sgminer x16r and started mining. this is the only one that does this. I only mine on profit switch pools supplied.
I also have to add command -I 19 otherwise it mines 500kh/s per card

In some countries (don't know if all) we have 2 prices for electricity. High (day) and Low (night) price.

So whan runing "rules" in AWM some coins  might be profitable night but loosing money at daytime.

Is it possible to implant that we coud enter 2 different electricity prices ? (and some way to define when they are walid)

or

Posibility do define the timeframe whe certain "rule" is active and when not.

Best regards.

Thanks for the update.

The feature to include power usage for benchmarks should be possible to support on nVidia systems in the future.