[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 314.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ralf007at on July 10, 2018, 12:44:27 AM

Quote from: patrike on July 08, 2018, 10:33:55 AM

Quote from: ralf007at on July 06, 2018, 04:00:35 AM

Quote from: patrike on July 05, 2018, 08:30:45 AM

Quote from: ralf007at on July 05, 2018, 07:42:39 AM

Hi Patrik,

since we have updated AM to Version 5.2.5, we have the issue, that many of our Antminer L3+ cannot be controlled through API commands (and so the Profit-Switching is not working anymore) the miner shows API Access: Privileged in the Summary Tab - but cannot be for example restarted through AM?!
we tried also to Configure API access through the AM-Tools - the program returns OK - but nothing changes...

do you have an idea?!

BR Ralf

Hi Ralf,

If you select a miner, is it that toolbar buttons like Restart and similar is disabled? That can happen in two scenarios:

1) The miner is Restricted API mode. You have however already confirmed that it's Privileged API.

2) Awesome Miner is busy sending other commands to this miner. It can be that you have defined a rule that constantly sends commands to this miner. You can typically detect this by looking in the Awesome Miner log file (toolbar: Tools -> Log File), where you will fine entries saying "Rule execute" and possible additional information about what commands that are being sent to the miners.

Hi Patrik,

thank you very much!! it was a rule - actually i tried to resolve a problem with Antminer A3-Miners - they go offline sometimes (maybe all 2 to 3 days once) and when i reboot them from the browser - or when i go to tools-antminer and choose configure api access again - the miner reboots and afterwards working again...
i tried to make a rule, where i go through API-Command restart (*) - would actually working - but i don't find the right event to trigger the rule?! do you have a suggestion??

BR Ralf

The Miner Command can send a reboot command to the mining process, but based on your description it sounds like it's really a reboot you want. Use the "SSH Command" action and specify Reboot.
You can use the predefined rule called "Offline Detection" and define an action to reboot.

Hi Patrik,

the rule is not working - it is still sending an email when the miner goes offline but the reboot don't work. i cannot reboot the mainer at the main-tab either - the only way is to configure API access throgh the Tools-Tab-Antminer Function - then the miner reboots and work again?!

BR Ralf

For the reboot rule that doesn't execute: Please verify that the correct SSH password is used for the rule. The default SSH credentials are root / admin, and this is not the same as to the Antminer web interface. You can open the Awesome Miner log file (toolbar: Tools -> Log File) and search for "SSH Logging in". It might be that the Antminer is responding with "A supplied password or user name is incorrect".

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: billybobthorton on July 09, 2018, 09:21:43 PM

Can you add support for Merit (MRT) miner?

It looks like this one is based on Cpuminer-opt, is that correct? If that's the case you should be able to select Cpuminer-opt as mining software and manually point it to use the Merit Miner executable instead.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: acyclovir on July 09, 2018, 05:50:04 PM

Quote from: patrike on July 09, 2018, 02:53:54 PM

Quote from: acyclovir on July 09, 2018, 11:46:44 AM

Hi Patrike,

I have created 2 rules for my managed miner

1 each day at 11pm run managed template (to change to a custom miner and custom pool only comand line, no api)
2 each day at 8 am return again to managed miner, but the only way to make it work again is stopping the miner and manually (contextual menu "convert to managed miner")

Is there any other way to by time trigger switching between managed tamplate and managed miner profile?

Thanks

There are currently no rule actions for converting between Managed Miner and Managed Profit Miner. I will note your request for this and it should be easy to implement.

This will be awesome for my miner Cheesy

, thanks in advance Patrike, meanwhile is there any command or c#script action that could i use?

This is not supported via the scripting either.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Bob-Bit on July 09, 2018, 04:39:17 PM

Hi Patrike. Looks like your advice helped with my issue with AM forgetting the locations of my custom miners. The file location was marked as read only in windows. I changed it but it kept changing back. I had to use a tutorial I googled to get the changes to stick, apparently some windows update screwed up windows for everyone it installed for. I always disable updates, but I do let it run once on a new install, and I guess that's what happened. Anyways, I had a good idea, not sure, but it might be an easy one. So about the field that you created in online services that keeps track of pool performance, is it possible for it to show numbers above 100%? That could make it more accurate. Thanks for all your help, and for creating a superb program!

Thanks for your feedback. 100% is the maximum, as the pools typically not perform better than the predictions, it's more the other way around.

baf28

newbie

Activity: 117

Merit: 0

Quote from: patrike on July 09, 2018, 02:46:23 PM

Quote from: baf28 on July 08, 2018, 09:21:56 PM

Quote from: patrike on July 08, 2018, 11:05:04 AM

Quote from: baf28 on July 08, 2018, 03:43:14 AM

BTG coin all pool and all share REJECT.

I manually added the parameters to the pool: --algo 144_5 --pers BgoldPoW
After that everything worked perfectly.
Please, please correct the settings of the BTG Minging.

Well thank you.

Today BTG disappeared from Awesome Miner
On whattomine and coincalculators, he switched from Zhash to EquihashBTG and disappeared from Awesome Miner
How to return the BTG? or when will he return?

These coins that are forking are often a bit unstable and drop out of the lists from WhatToMine.com and Coinstatistics. You should be able to add the following link to the Options dialog, Statistics section, as a WhatToMine JSON URL:
https://whattomine.com/coins/214.json

I will also update the algorithm mapping for Coincalculators in the next release of Awesome Miner to align with these changes.

thank you so much

ralf007at

newbie

Activity: 52

Merit: 0

Quote from: patrike on July 08, 2018, 10:33:55 AM

Quote from: ralf007at on July 06, 2018, 04:00:35 AM

Quote from: patrike on July 05, 2018, 08:30:45 AM

Quote from: ralf007at on July 05, 2018, 07:42:39 AM

Hi Patrik,

since we have updated AM to Version 5.2.5, we have the issue, that many of our Antminer L3+ cannot be controlled through API commands (and so the Profit-Switching is not working anymore) the miner shows API Access: Privileged in the Summary Tab - but cannot be for example restarted through AM?!
we tried also to Configure API access through the AM-Tools - the program returns OK - but nothing changes...

do you have an idea?!

BR Ralf

Hi Ralf,

If you select a miner, is it that toolbar buttons like Restart and similar is disabled? That can happen in two scenarios:

1) The miner is Restricted API mode. You have however already confirmed that it's Privileged API.

2) Awesome Miner is busy sending other commands to this miner. It can be that you have defined a rule that constantly sends commands to this miner. You can typically detect this by looking in the Awesome Miner log file (toolbar: Tools -> Log File), where you will fine entries saying "Rule execute" and possible additional information about what commands that are being sent to the miners.

Hi Patrik,

thank you very much!! it was a rule - actually i tried to resolve a problem with Antminer A3-Miners - they go offline sometimes (maybe all 2 to 3 days once) and when i reboot them from the browser - or when i go to tools-antminer and choose configure api access again - the miner reboots and afterwards working again...
i tried to make a rule, where i go through API-Command restart (*) - would actually working - but i don't find the right event to trigger the rule?! do you have a suggestion??

BR Ralf

The Miner Command can send a reboot command to the mining process, but based on your description it sounds like it's really a reboot you want. Use the "SSH Command" action and specify Reboot.
You can use the predefined rule called "Offline Detection" and define an action to reboot.

Hi Patrik,

the rule is not working - it is still sending an email when the miner goes offline but the reboot don't work. i cannot reboot the mainer at the main-tab either - the only way is to configure API access throgh the Tools-Tab-Antminer Function - then the miner reboots and work again?!

BR Ralf

ralf007at

newbie

Activity: 52

Merit: 0

Quote from: patrike on July 09, 2018, 02:50:36 PM

Quote from: ralf007at on July 09, 2018, 08:21:17 AM

Hi there,

i have a problem with profit-switching (asic)
if i view details and activate the Profit switching Tab - on this Tab AM shows me a negative Profit per day (and so never switch to that pool)
but if i manualy prioritize this pool (mining-dutch.nl) AM shows me a positive profit - i tried to raise the Profit factor in Pool Properties to 100 - but nothing changes?!

somebody an idea?

BR Ralf

Are you running Awesome Miner version 5.1? The View details dialog is based on the hashrates configured in your profit profile - and this hashrate is listed in the same table. The miner list uses the actual hashrate and the first value is the revenue, not profit.

Hi Patrik,

i am using Version 5.3. and the hashrate in the configured profile is about the same than the real hashrate. yes - the revenue and the profit are very positive if i manualy prioritize the pool - but in the view details the profit per day is way negative?!

BR Ralf

billybobthorton

newbie

Activity: 10

Merit: 0

Can you add support for Merit (MRT) miner?

acyclovir

newbie

Activity: 45

Merit: 0

Quote from: patrike on July 09, 2018, 02:53:54 PM

Quote from: acyclovir on July 09, 2018, 11:46:44 AM

Hi Patrike,

I have created 2 rules for my managed miner

1 each day at 11pm run managed template (to change to a custom miner and custom pool only comand line, no api)
2 each day at 8 am return again to managed miner, but the only way to make it work again is stopping the miner and manually (contextual menu "convert to managed miner")

Is there any other way to by time trigger switching between managed tamplate and managed miner profile?

Thanks

There are currently no rule actions for converting between Managed Miner and Managed Profit Miner. I will note your request for this and it should be easy to implement.

This will be awesome for my miner Cheesy

, thanks in advance Patrike, meanwhile is there any command or c#script action that could i use?

Bob-Bit

jr. member

Activity: 241

Merit: 6

Hi Patrike. Looks like your advice helped with my issue with AM forgetting the locations of my custom miners. The file location was marked as read only in windows. I changed it but it kept changing back. I had to use a tutorial I googled to get the changes to stick, apparently some windows update screwed up windows for everyone it installed for. I always disable updates, but I do let it run once on a new install, and I guess that's what happened. Anyways, I had a good idea, not sure, but it might be an easy one. So about the field that you created in online services that keeps track of pool performance, is it possible for it to show numbers above 100%? That could make it more accurate. Thanks for all your help, and for creating a superb program!

principino1984

newbie

Activity: 72

Merit: 0

Quote from: patrike on July 09, 2018, 02:35:49 PM

Quote from: principino1984 on July 08, 2018, 03:56:58 PM

hey guys, I read a lot of pages but I can't find what I'm looking for. I'm using custom sw that doesn't have the -b (API) command enabled, and awesomeminer just add it automatically. How can I set not to use that parameter?

thanks
Marco

Hi Marco. First make sure you have Awesome Miner v5.1. You can define user defined Managed Software (Options dialog, Managed Software), and specify the Compatibility Mode "Command Line Only". In this case, Awesome Miner will not add the "-b" flag to enable the API.

well, I tried that way and it didnt work, I tried again now and it worked... who know Cheesy

Thanks for your support
Marco

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: acyclovir on July 09, 2018, 11:46:44 AM

Hi Patrike,

I have created 2 rules for my managed miner

1 each day at 11pm run managed template (to change to a custom miner and custom pool only comand line, no api)
2 each day at 8 am return again to managed miner, but the only way to make it work again is stopping the miner and manually (contextual menu "convert to managed miner")

Is there any other way to by time trigger switching between managed tamplate and managed miner profile?

Thanks

There are currently no rule actions for converting between Managed Miner and Managed Profit Miner. I will note your request for this and it should be easy to implement.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: refjamie2 on July 09, 2018, 10:06:54 AM

Hey Patrike

Two quick feature requests:

* Ability to count the number of miners selected (like Excel does in the bottom right corner when you select multiple cells)
* In the notifications tab, when you select one notification it also highlights other notifications on the same miners so you can quickly spot patterns.

Keep up the great work!

Thanks for your feedback - these are good points. In the Notification tab you can click on the Miner column to sort - not a perfect solution but can be of use in some scenarios.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ralf007at on July 09, 2018, 08:21:17 AM

Hi there,

i have a problem with profit-switching (asic)
if i view details and activate the Profit switching Tab - on this Tab AM shows me a negative Profit per day (and so never switch to that pool)
but if i manualy prioritize this pool (mining-dutch.nl) AM shows me a positive profit - i tried to raise the Profit factor in Pool Properties to 100 - but nothing changes?!

somebody an idea?

BR Ralf

Are you running Awesome Miner version 5.1? The View details dialog is based on the hashrates configured in your profit profile - and this hashrate is listed in the same table. The miner list uses the actual hashrate and the first value is the revenue, not profit.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: baf28 on July 08, 2018, 09:21:56 PM

Quote from: patrike on July 08, 2018, 11:05:04 AM

Quote from: baf28 on July 08, 2018, 03:43:14 AM

BTG coin all pool and all share REJECT.

I manually added the parameters to the pool: --algo 144_5 --pers BgoldPoW
After that everything worked perfectly.
Please, please correct the settings of the BTG Minging.

If you have coincalculators.io as your primary coin source, they have BTG listed as Zhash which isn't fully correct. It should be "Equihash BTG", which includes some personalization. WhatToMine is correct here.

Awesome Miner has a feature whre the algorithm can manually be overridden for a specific coin. To override the algorithm for a coin, open the Options dialog, Statistics section and use the setting for Override coin algorithms. I think that if you define BTG here as "Equihash BTG", Awesome Miner will launch EWBF software with the correct parameters.

Well thank you.

Today BTG disappeared from Awesome Miner
On whattomine and coincalculators, he switched from Zhash to EquihashBTG and disappeared from Awesome Miner
How to return the BTG? or when will he return?

These coins that are forking are often a bit unstable and drop out of the lists from WhatToMine.com and Coinstatistics. You should be able to add the following link to the Options dialog, Statistics section, as a WhatToMine JSON URL:
https://whattomine.com/coins/214.json

I will also update the algorithm mapping for Coincalculators in the next release of Awesome Miner to align with these changes.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on July 08, 2018, 08:38:39 PM

Quote from: patrike on July 08, 2018, 01:49:00 PM

Quote from: trucobit on July 08, 2018, 12:51:30 PM

Quote from: patrike on July 08, 2018, 11:00:39 AM

Quote from: trucobit on July 07, 2018, 09:52:15 PM

I'm pretty sure Coinwarz is not working well with AW. I have placed Coinzwar in first place in statistics, also I have paid to have more requests, they are only $ 10.

And looking at the Coin tab, there is not a single coin that indicates that it is coinwarz, and that this first.

Coinwarz has many rare coins that are not in WTM or CC. But they do not appear, please I could review that. I do the test and it gives me correct, I have 100,000 requests daily and I see that I have not spent any, so AW does not collect data from Coinwarz, something is broken.

I've just tested with Coinwarz and my API key, and I do get about 50 coins from them and it looks fine. Do you get any specific message when you use the "Test" button in the Options dialog, Statistics section, for the Coinwarz API setting?

https://www.dropbox.com/s/i5imtmqu12aokdb/Captura%20de%20pantalla%202018-07-08%20a%20las%2019.45.48.png?dl=0

when using the TEST button it tells me that I have 100,000 requests and left -1, but that -1 is always there. I even think that before paying I did not receive coins either. It may be that your integration of the api does not take into account the payment api ?. I have paid to ask for many coins, as I hope they will pay in WTM and CC, to be able to request every 2 minutes.

And I told you that I put coinwarz first in the list, since they are so rare coins that are not in the others. I go to the COIN tab and I do not have a single coin that indicates that it comes from Coinwarz, only Coincalculator, whatomine and the ones I add for AW CU that does not put the source.

I have deactivated Wtm and CC, I only have the coins that I have added for AW CU, it does not appear anywhere that puts COINWARZ

Can you verify the following:

1) Please make sure that you don't have any blank spaces or similar at the end of the Coinwarz API key you entered in Awesome Miner

2) Can you please test the Coinwarz integration by opening a web browser and enter the following URL. Replace 'x' with your Coinwarz API key.
http://www.coinwarz.com/v1/api/profitability/?apikey=x&algo=all

This is the URL Awesome Miner uses to get information about all coins. Do you get a something that looks like coin statistics, or simply some error message?

1.- no spaces

2.- https://www.dropbox.com/s/48y55tdlu0v16xv/Captura%20de%20pantalla%202018-07-09%20a%20las%203.31.05.png?dl=0

says as I understand that I have exceeded 300 requests daily, but if I look at statistics every 6 minutes, they make a total of 240 requests.

It can not be that this is something badly implemented. I consider a call, every time I ask for data. I do not believe that each information of each currency counts as a request.

But that happens all day, there are no times when I have coinwarz coins, they never enter me, I never reach the limit. There could be a failure that you can either repair or communicate to the owner of coinwarz in your programming language, they will always pay more attention to you than to me.

It is incredible that even with the payment version of 300 requests can not do it.

If you want I can pass the key to you privately and I disconnect it for you to try it

I will make an update to the next release of Awesome Miner and implement a fail safe that always will prevent too frequenty API calls for Coinwarz. I'm not sure if this is the issue, but let's give it a try. Once the new version is available, please wait one day (so you get new Coinwarz quota, please verify via the web browser first) and then you can see if it's working better.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: principino1984 on July 08, 2018, 03:56:58 PM

hey guys, I read a lot of pages but I can't find what I'm looking for. I'm using custom sw that doesn't have the -b (API) command enabled, and awesomeminer just add it automatically. How can I set not to use that parameter?

thanks
Marco

Hi Marco. First make sure you have Awesome Miner v5.1. You can define user defined Managed Software (Options dialog, Managed Software), and specify the Compatibility Mode "Command Line Only". In this case, Awesome Miner will not add the "-b" flag to enable the API.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Odatas on July 08, 2018, 01:54:50 PM

Quote from: patrike on July 08, 2018, 10:29:45 AM

Quote from: Odatas on July 06, 2018, 05:51:48 AM

For some reasons i cant use the new equihash algos. I selected the miners especially EWBF Equihash miner 0.3 in my profit switch profile and the algortihms...but they dont show up in the Benchmark window. In the benchmark window the right profit profile is selected. The normal Equihash shows up just not the other ones. Am im missing something?

Most mining software doesn't support benchmark mode, and for that reason a pool must be used for the benchmark. Can you please check that you have made a Equihash BTG pool (for example) available to the profit switcher in the Options dialog, Profit switching section?

Every pool in the profit miner is enabled....the only thing i didnt enable was a custome pool.

At the moment there are no predefined pools that support these very new algorithms. In the next update I will include at least Equihash Zero. If you have your own pool baed on BTG for example, you can add it as a custom pool to the profit switcher.

acyclovir

newbie

Activity: 45

Merit: 0

Hi Patrike,

I have created 2 rules for my managed miner

1 each day at 11pm run managed template (to change to a custom miner and custom pool only comand line, no api)
2 each day at 8 am return again to managed miner, but the only way to make it work again is stopping the miner and manually (contextual menu "convert to managed miner")

Is there any other way to by time trigger switching between managed tamplate and managed miner profile?

Thanks

rudefyet

newbie

Activity: 25

Merit: 0

Quote from: patrike on July 08, 2018, 10:51:13 AM

Quote from: rudefyet on July 07, 2018, 07:16:59 PM

Having issues on a fresh install with 5.3, even with --gpu-platform 1 set as a command line option for sgminer, it's still trying to use my NVIDIA cards in an AMD/NVIDIA rig.

Can you try with --gpu-platform 2 as well? Sgminer can sometimes pick up built-in Intel devices as platform 0, and if you have both nVidia and AMD, you might have both 0, 1 and 2 as possible values.

Somehow it flip flopped and AMD is now platform 0. Not anything Awesome Miner did. It was a fresh install of Windows/drivers and for some reason sgminer is detecting it differently than in the past. I had to use platform 1 before.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 314. (Read 703512 times)