Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 317. (Read 703148 times)

how to register in the miner CryptoDredge_0.6.0 -- api-bind?   find it off, how to enable ? Thanks

Pool properties --> Advanced --> Profit settings :
DOT or COMMA
I try set profiit to 0.7 ??  I have two rigs with same settings and same pools in group but work strange...
every rig differently

Must be dot or comma ( 0.7 or 0,7 ) ?   Program accept both...

And what means in pool group properties PRIORITY nad QUOTA ?

Is there any developments on a Zhash miner for AMD cards? Thankyou for your hard work

I have started experimenting with the Profit Switching functionality, but am having an odd issue.  Again I'm only doing this on a single small rig with a single 1050Ti for now until I get the kinks worked out.  I have these algos configured in the profit switcher:

http://www.cstone.net/~dk/AM_error-03.JPG

ETH is the most profitable (and what my other 13 GPU rigs controlled by AM mines, especially the 1080Ti rigs running the ETH pill).  At any rate, this test rigs starts out on ETH as expected, but after a while, it switches to one of the less profitable algos.  If I then stop the rig, un-check all but Ethereum under algos and restart, I get the following error:

http://www.cstone.net/~dk/AM_error-01.JPG

Not sure why I would get that error.  All the other rigs are happily mining away on that same pool.  If I shutdown AM and restart it, it starts working again, but the same thing keeps happening.  I can stop and start mining on any of the other rigs, and they don't have this error.  The other rigs are also running Managed Profit Miner profiles, but only have the Ethereum algo selected atm due to this issue.

I only have the NiceHash pool configured under Options/Profit Switching although I do have various other pools defined under Options/Pools.  Here are some of them:

http://www.cstone.net/~dk/AM_error-04.JPG

I used those when I was manually switching between algos using Regular Managed Miner profiles.  Could that be somehow causing the issue now that I'm using Managed Profit Miner profiles?  I'm running the latest 5.2.5 version btw, including the Remote Agents.

The latest releases is by default only listing algorithms where you have a pool available for the profit switcher. If you want to do offline benchmarking (supported by ccminer and a few more), click the box for "Benchmark without a pool" in the Benchmarking dialog. This should make phi2 available again.

I've added a number of new pools for the next release, including those you suggested.

Hi again.

Thanks for the suggestion. Awesome Miner do have features to launch any remote commands via the Remote Agents, and used together with the rules and Manual Actions, there can be some level of automation. However, for this specific scenario I do agree with your point that Awesome Miner itself needs to provide more information and specific behaviors as well, as it's not only about executing commands. I will consider this. Thanks!

Hi Patrik,

since we have updated AM to Version 5.2.5, we have the issue, that many of our Antminer L3+ cannot be controlled through API commands (and so the Profit-Switching is not working anymore) the miner shows API Access: Privileged in the Summary Tab - but cannot be for example restarted through AM?!
we tried also to Configure API access through the AM-Tools - the program returns OK - but nothing changes...

do you have an idea?!

BR Ralf

I have started experimenting with the Profit Switching functionality, but am having an odd issue.  Again I'm only doing this on a single small rig with a single 1050Ti for now until I get the kinks worked out.  I have these algos configured in the profit switcher:

ETH is the most profitable (and what my other 13 GPU rigs controlled by AM mines, especially the 1080Ti rigs running the ETH pill).  At any rate, this test rigs starts out on ETH as expected, but after a while, it switches to one of the less profitable algos.  If I then stop the rig, un-check all but Ethereum under algos and restart, I get the following error:

Not sure why I would get that error.  All the other rigs are happily mining away on that same pool.  If I shutdown AM and restart it, it starts working again, but the same thing keeps happening.  I can stop and start mining on any of the other rigs, and they don't have this error.  The other rigs are also running Managed Profit Miner profiles, but only have the Ethereum algo selected atm due to this issue.

I only have the NiceHash pool configured under Options/Profit Switching although I do have various other pools defined under Options/Pools.  Here are some of them:

I used those when I was manually switching between algos using Regular Managed Miner profiles.  Could that be somehow causing the issue now that I'm using Managed Profit Miner profiles?  I'm running the latest 5.2.5 version btw, including the Remote Agents.

Good update and good miners added. But I have a question, it appears in Option> software z enemy 1.12, but then in the configuration of an RIG, right button, edit profile. I do not appear as such, I see a Z enemy without a number. Is that correct? because I see it a bit confusing.

Sorry to be heavy. But remember that you recommended me the way that all the miners mined a single currency. Now I have to try all the rigs one by one, get duplicates of the profiles, and modify the groups so that I have the OC of the miner and the HASH of the MAster. It's a lot of work, really.

This request does not arise from a whim, it is because of the problem of exceeding the minimum entry in some exchanges or lose the coins. If a Pool pays every hour, I have one hour to do the minimum to be accepted by the exchage AND NOT TO LOSE MONEY. And the best way is to point everything to the same currency. This is valid for the vast majority that we have several rigs and we do not have Asics. The asics exceed the minimum easily, but it depends on each rig. It is necessary to send everything to the same currency or pool.

I hope you understand my problem, which will surely be that of many even if you have not noticed.

I do not think that it is difficult for AUTO profit to create a group with the property of following one that it marks, it does not have more mystery. It's a lot like that.

It is much easier to try the new miners, change the OC, give to save and go. Without having to make duplicate profiles by HASH and by OC, to then make the group of personalized profit, understand that it is a lot of mess.

phi2 is missing here in the benchmark dialog since the last update.

Also please add phi2 to ahashpool/zpool (port 8332). Groestl is also still missing from ahashpool.

I managed to add BTG to AM but it's not pulling profit profile information down for some reason so the profit switcher won't switch to it. I added it  as a user defined service with the following info:

Service: MiningPoolHub
Algo: Equihash BTG
URL base: miningpoolhub.com:20595
URL Prefix: check stratum+tcp
Algorithm URL Part: us-east.equihash-hub
Algorithm API identifier: Equihash-BTG
Profit Factor: 1

This allows you to benchmark and connect to the pool correctly, but like I said no profit info is downloaded even after restarting AM, so the algo never gets selected.

What is the reason for that?  The current version is 1.5.8, so 1.4.4 is quite old.  Perhaps some specific parameters needs to be passed to make the 1.5.x versions work?

I'm running benchmarks on a small single 1050Ti test rig, and it just hangs after core initialized in every algo using Excavator: