Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 501. (Read 703512 times)

Not sure, read through this thread, there might be an answer here.

I'll take a look at the online help on the website and if I find any info I'll post it here.

Hmmm daft question , could it be anything to do with using the beta mining drivers from AMD

Or is it because I am using the free software on 2 different computers would that cause the issue ? each computer is using GPU only and not CPU

It has worked fine for months using Nicehash.

Hmm !   I don't have AMD cards here, all Nvidia.

Someone will chime in here and help.

Hope you like the software, it's all I use.

Thank you I have tried that , I have even uninstalled and re-installed the software , the strange part is that on my Nvidia system when I added a new miner , it asked me to put my bitcoin address in and tick which ones to use Zcash etc , but it does not come up with that option it just finishes and I have to override the profile to put the bitcoin address in , the same thing happens as detailed above it starts , checks , then stops.....

Delete that miner and set it up as a My Profit Miner -- test this to see if it works.

Oh, wait ......

'Click next , it does not ask me to tick zpool etc or to enter BTC address , so I goto properties overide pool settings , I tick Zpool and enter my address....'

You don't need to do this, remove the tick in the override settings, it should work from the main settings under Profit Switching for Zpool.

Click Options > Click on Profit Switching on the left side, tick zpool and enter wallet address.

Help please , Awesome miner newbie , I have moved over since Nicehash was hacked....

I have 2 mining computers both running the free version of the software

1 of them is a nivida system 2 x 1080ti , it is happily mining away.....using zpool and awesome miner

BUT

My 2nd system 4 x AMD rx 470 when I used add new miner

I click next , choose Managed Profit miner , name my miner , mining host = local , profit switching mode = AMD GPU

Click next , it does not ask me to tick zpool etc or to enter BTC address , so I goto properties overide pool settings , I tick Zpool and enter my address....Mining then starts but it will not stay on , it hooks up to the miner , test stability then when it comes to starting to mine building library then it crashes , it tries say 3 times then fully stops

Anyone offer any help please.

I've left my miner(s) alone, still doing their job, so when the site returns we will find out.

The API seems to be sending data to Awesome Miner with prices, so I think we are OK, but don't quote me on that.

Update: Site is back (zpool), but please expect some outages during the day..

From time to time, zpool.ca site displaying "error 502 bad gateway". Is this a problem for the miner ? Because it seems continue mining without any problems.

You should get an idea of your earnings from Awesome miners panel (see the post by xChackOx just before yours) but the real figures are from the mining pool you are using, they are the ones paying you, it is nothing to do with Awesome Miner. Generally a pool allows you to set the payment threshold.

Hi guys,

now i have a new problem and im not able to fix it. Now I use Awesome Miner (Free) with two Miners. one for CPU and one for GPU. I like to mine on miningpoolhub but ive got everytime error messages like:


         **********  cpuminer-opt 3.5.9.1  ***********
     A CPU miner with multi algo support and optimized for CPUs
     with AES_NI and AVX extensions.
     BTC donation address: 12tdvfF7KmAsihBXQXynT6E6th2c2pByTT
     Forked from TPruvot's cpuminer-multi with credits
     to Lucas Jones, elmad, palmd, djm34, pooler, ig0tik3d,
     Wolf0, Jeff Garzik and Optiminer.

CPU: Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz
CPU features: SSE2
SW built on Mar  4 2017 with GCC 4.8.3
SW features: SSE2
Algo features: SSE2 AES AVX AVX2
Start mining with SSE2

[2017-12-07 09:44:28] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:17018
[2017-12-07 09:44:28] 8 miner threads started, using 'lyra2rev2' algorithm.
[2017-12-07 09:44:28] Stratum authentication failed
[2017-12-07 09:44:28] ...retry after 10 seconds
[2017-12-07 09:44:38] Stratum authentication failed
[2017-12-07 09:44:38] ...retry after 10 seconds
######################################################

*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-12-07 09:44:06] Starting on stratum+tcp://hub.miningpoolhub.com:17018
[2017-12-07 09:44:06] NVML GPU monitoring enabled.
[2017-12-07 09:44:06] NVAPI GPU monitoring enabled.
[2017-12-07 09:44:06] 1 miner thread started, using 'lyra2v2' algorithm.
[2017-12-07 09:44:06] Stratum authentication failed
[2017-12-07 09:44:06] ...retry after 30 seconds
[2017-12-07 09:44:07] API open to the network in read-only mode on port 4029
[2017-12-07 09:44:37] Stratum authentication failed
[2017-12-07 09:44:37] ...retry after 30 seconds


What can I do?

Hi all just started using awesome miner because of nicehash going down.

only questions are how can i see how much btc im earning a day etc

and how often and what balance do you need before a payout?

cant seen to find these answers

thanks

Is there a way to disable some certain gpu when using auto-switch?

I know I can use the command "-d 1,2" to disable gpu0 when using regular miner config but I couldn't find a way to do the same with auto switch.
I tried to add it in the mining software config in the profit profile but it doesn't work.

Is it because ETN was removed from WhatToMine?  It's now back.

Well, since NiceHash got hacked and won't come back on at least 24hrs, I pointed my miners to zpool. But right now it is showing some crazy numbers https://imgur.com/a/XGUbU

Either that or somehow Lyra2rev2 is paying like crazy!

As you know Nicehash is down today. When using profit switching on a antminer what happens when a pool is dead? If the most profitable pool is dead, does it use the second most profitable?

Nicehash down.

Can't use SGMiner - disabled that.

Tried to use ZPool on Claymore but not connecting.

Tried to use Hash Refinery - Says please input Zpool address

Tried to use GranatGas same error message.

second day i can't see profit on ETN

Is anyone else having issues with Coins not being updated anymore? Some of them are seemingly being updated, but many others just stopped.

Is one of the data services you are pulling from down patrike?

patrike,
can you add please a ALGO filter in Pools, becouse when you want to find some pool like garanatasgas with multicoins autoswitch is a little hard.
Thank you!

Hi, thanks for the reply. I have never tried nicehash etc. But this software seems quite logical, since its (appears) making only the switch you are going to apply in your rig, stopping a .bat and and run another.

I will read help files, but what I understand is, the more hashrate power you have in total, the higher rate of the projected profit you get. So you need to quickly reach the pool limits otherwise cant make use of currently high profit rates, am I right?

If this is the case, I think its best to arrange users from different locations to make their rigs work alltogether, the software appears support this.