Patrike,
Can you update cpuminer to 3.7.4 that now has 4way support. Tested it here over the last few days, all seems well with this release.
https://bitcointalksearch.org/topic/ann-cpuminer-opt-v3881-open-source-optimized-multi-algo-cpu-miner-1326803
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 505. (Read 703512 times)
November 30, 2017, 09:18:56 PM
November 30, 2017, 05:55:58 PM
Hi patrike,
is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?
since im using your app my devices are often restarting within 2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour
so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.
so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.
Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Not in your Hands 
is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?
since im using your app my devices are often restarting within 2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour
so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.
Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable
Not in your Hands 
November 30, 2017, 05:34:03 PM
Awesome Miner version 4.2.3
- Claymore Ethereum Miner 10.2
- Adjusts to new the zpool SHA-256 profit reporting
- Correction to the pool list for DSTM Zcash miner when running as External Miner
- Correction to pool change operation on Claymore Zcash miner running as Managed Miner
- Claymore Ethereum Miner 10.2
- Adjusts to new the zpool SHA-256 profit reporting
- Correction to the pool list for DSTM Zcash miner when running as External Miner
- Correction to pool change operation on Claymore Zcash miner running as Managed Miner
November 30, 2017, 05:21:25 PM
ok,thanks for adding support for sia dual mining! just a quick question how can i control sia intensity from AM could you include snap shot of how you entered it into pool configuration GUI, thanks for the help.
The fastest way to do it for a single Managed Miner is to right click on it and open Properties. Then go to Command Line section and enter something like:-dcri 40
November 30, 2017, 05:19:26 PM
Sorting doesn't seem to work on the GPU list. I can click the column headers and the little arrow indicates the sort order but the list is clearly not being sorted by that column though it does reorder the list (not sure by what though). Is sorting supposed to work?
The sorting is not implemented for the GPU list, but you are correct that it's possible to click the column headers - although you don't get any sorting done. Was it something like sorting by temperature or hashrate you had in mind for scenarios where you have a large number of GPU's? This could be something for me to improve in the future. November 30, 2017, 05:17:28 PM
Having an issue with profit display for one rig. I have two rigs, both set to "unspecified CryptoNight" because I'm using NiceHash. One rig displays profit ok but the other does not. Both rigs have valid hashrate but the difference is the one that works is using Claymore and the one that doesn't is using a user-defined miner but the strange thing is if I apply a different template that uses Electroneum it displays profit ok. I don't understand what is going on.
(I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)
The latest version of Awesome Miner can get API data from XMR-Stak API. Please use that one instead, because I cannot give support on something that is outside the product itself. (I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)
November 30, 2017, 05:16:26 PM
Having an issue with running a batch file before starting the mining software. The batch file runs ok but when it ends AM stops the managed miner and attempts to restart it. It never even tries to launch the miner software.
Here's the message from Diagnostics after the batch file runs:
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
This is the batch file:
C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main
The miner launches ok if I don't use the batch file so I know the miner configuration is correct.
Is this something you have entered in the Properties of a Managed Miner, Command line section, in the "Batch-file commands" field? Is it working better if you remove the timeouts?Here's the message from Diagnostics after the batch file runs:
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
This is the batch file:
C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main
The miner launches ok if I don't use the batch file so I know the miner configuration is correct.
Did you get any additional output from the diagnostics other than the last few lines saying that it failed?
November 30, 2017, 04:49:10 PM
Sorting doesn't seem to work on the GPU list. I can click the column headers and the little arrow indicates the sort order but the list is clearly not being sorted by that column though it does reorder the list (not sure by what though). Is sorting supposed to work?
November 30, 2017, 04:28:31 PM
ok,thanks for adding support for sia dual mining! just a quick question how can i control sia intensity from AM could you include snap shot of how you entered it into pool configuration GUI, thanks for the help.
November 30, 2017, 02:03:38 PM
And please support for more coins! What give us a AM when we cant mine new coins....
Awesome Miner automatically includes all coins in the man list from WhatToMine.com. In addition to that you can add additional WhatToMine coins via their JSON URL's if they are not part of their main listing. November 30, 2017, 02:02:42 PM
Hi Patrike
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.
I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.
Awesome Miner is getting the data from the Block Explorers, and they might have a small delay in their updates as well. Can you please verify the same address on the Block Explorer to see if you get the same result:thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.
I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.
https://chainz.cryptoid.info/dash/
November 30, 2017, 02:00:39 PM
Hi patrike,
So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€
Any plans to integrate starpool support?
GranatGas had issues with HTTPS connections a while ago. Is this still a problem? At the bottom of the Online Services tab you can select which services to show in the list. Is GranatGas enabled?So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€
Any plans to integrate starpool support?
I will consider Starpool as well.
November 30, 2017, 01:52:34 PM
Having an issue with profit display for one rig. I have two rigs, both set to "unspecified CryptoNight" because I'm using NiceHash. One rig displays profit ok but the other does not. Both rigs have valid hashrate but the difference is the one that works is using Claymore and the one that doesn't is using a user-defined miner but the strange thing is if I apply a different template that uses Electroneum it displays profit ok. I don't understand what is going on.
(I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)
(I'm getting a hashrate with my user-defined miner because of the adapter app I wrote to feed hashrates from XMR-Stak to AM)
November 30, 2017, 01:34:45 PM
Having an issue with running a batch file before starting the mining software. The batch file runs ok but when it ends AM stops the managed miner and attempts to restart it. It never even tries to launch the miner software.
Here's the message from Diagnostics after the batch file runs:
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
This is the batch file:
C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main
The miner launches ok if I don't use the batch file so I know the miner configuration is correct.
Here's the message from Diagnostics after the batch file runs:
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed
This is the batch file:
C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main
The miner launches ok if I don't use the batch file so I know the miner configuration is correct.
November 30, 2017, 01:08:26 PM
Don't know if you've seen this yet but Cast XMR now has an API!
https://bitcointalk.org/index.php?topic=2256917.0;all
https://bitcointalk.org/index.php?topic=2256917.0;all
November 30, 2017, 12:53:52 PM
And please support for more coins! What give us a AM when we cant mine new coins....
November 30, 2017, 12:52:13 PM
Hi Patrike
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.
I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.
I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.
November 30, 2017, 05:55:26 AM
Hi patrike,
So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€
Any plans to integrate starpool support?
So for now granat isnt working. You know how to fix it? It isnt showing up in the online services, too. And estimates are only 0,00€
Any plans to integrate starpool support?
November 30, 2017, 01:48:13 AM
Hi, I updated to ver. 4.2.1 but still facing same problem (I tried to set rule to find offline again, but didn't help).
For the moment I changed miner software from EWBF to DSTM and it looks fine.
Just want to report.
For the moment I changed miner software from EWBF to DSTM and it looks fine.
Just want to report.
Hi Patrike,
I tried to tweak rules and now it looks fine (find offline status properly).
Thanks for your effort !!
By the way, I still have 1 request and 1 suggestion.
[Request]
In Profit Switching Profile Properties window, due to window is too small I could not see all contents.
Can you make it little bigger, or put scroll bar?
[Suggestion]
When creating user defined coins, I want AM to look whattomine data by ticker (short name such as BTC, ETH, etc).
i.e. In case of Solaris (XLR), there are some data available in Whattomine but due to algo xevan not supported by AM, XLR is not listed in AM.
If I create user defined coin Solaris with ticker XLR, and AM seek coin XLR in whattomine for available data, it would be really helpful.
This can also nice for multi-algo coins like DGB if at least AM pick up proper price from whattomine.
If you add the algorithm to Options dialog, Algorithm section, these coins should be found by Awesome Miner. Try to add "Xevan" and refresh the list in the Coins tab.
November 30, 2017, 01:31:52 AM
How do I make profit switching work with dual mining?
If it's more profitable to do dual mining, the profit switcher will automatically do that.Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.
Jump to: