[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 503.

narousberg

legendary

Activity: 1753

Merit: 1007

Quote from: patrike on November 30, 2017, 02:02:42 PM

Quote from: narousberg on November 30, 2017, 12:52:13 PM

Hi Patrike
thanks for answer about switching off a profit switching for concrete external miner. Your software have so many settings))) Need time to know this all.

I found some bug in wallet balance viewing.
In core wallet for example i see 4.40584934 DASH
But AM balance viewer show me only 4.39584234 DASH
This Dash wallet has recived a lot of small transaction last time.
Looks like rounding issue in AM.
Other wallets displays wrong amount too if i get small transactions. Always small difference, but good software must be without those bugs)
Regards.

Awesome Miner is getting the data from the Block Explorers, and they might have a small delay in their updates as well. Can you please verify the same address on the Block Explorer to see if you get the same result:
https://chainz.cryptoid.info/dash/

I put 3 addresses of DASH in AM. And sum of this 3 addresses in not correct.

And I found another bug: Unable to delete wallet address over context menu. (If you go so: Main Window->Balance Tab->Right click on wallet viewer->Remove address

Thekingace

newbie

Activity: 22

Merit: 0

Quote from: patrike on December 02, 2017, 06:06:00 AM

Quote from: Thekingace on December 01, 2017, 11:54:00 AM

Quote from: patrike on November 30, 2017, 01:31:52 AM

Quote from: Thekingace on November 29, 2017, 08:27:21 PM

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding ~~XMR-stak~~ Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s.

I might get supported, but I get a large number of requets for features and more mining software right now. I added support for XMR-Stak and DSTM Zcash last week for example.

Thanks, great to now. I think cast-Xmr will get really popular since it's by far and large the most powerful cryptonight miner.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: resurgence on December 02, 2017, 03:51:11 AM

kind of disappointed at the fact that they only limit it to 2 max for free edition... my farm is more than that

The idea is that if you like the software and want to use it for more miners, you need to pay for a software license. This is the only way that makes it possible for me to continue to work on improving the software and make it even more awesome.

The purpose of the software is to save both time and money for you.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: apoteos on December 02, 2017, 02:02:10 AM

I just got started and purchased 2 S9 miners, this looks like a good application to start keeping track of everything. If I get it right I should be able to monitor GPU miners as well, is that correct?

Yes, you can monitor ASIC miners (like Antminer), GPU miners and CPU miners.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: NetfetMiningCompany on December 01, 2017, 11:54:57 PM

- XMR-Stak miner can be monitored as an External Miner

Does anybody know how to set the config up for this? I have the miner setup but it doesn't pick up any type of monitoring. Just shows as a "miner online"

There is a setting "httpd_port" in the config.txt file for XMR-Stak, where you need to specify a port for the API. This will be the port that Awesome Miner should be configured to connect to.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: tf2addict on December 01, 2017, 05:57:47 PM

I can't set a pool in the managed miner properties or template properties if I'm using a user-defined miner app. This creates a problem where when you apply a template it doesn't change the pool, it continues using the last pool. I believe when using built-in miner apps the pool also changes when you apply a template, correct?

I'm sure you're doing it like this because AM can't select a pool when launching the user-defined miner but the point is it doesn't need to.

Is it a user defined miner where you define the pool configuration yourself via command line? The pool should change when you change template for a built-in miner, because those have a pool setting. Your user-defined miners doesn't have this concept as Awesome Miner doesn't know the command line parameters for your custom software.

Shouldn't any command line arguments specified in your template, where you probably have your pools defined anyway, be applied to your managed miner?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Thekingace on December 01, 2017, 11:54:00 AM

Quote from: patrike on November 30, 2017, 01:31:52 AM

Quote from: Thekingace on November 29, 2017, 08:27:21 PM

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding ~~XMR-stak~~ Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s.

I might get supported, but I get a large number of requets for features and more mining software right now. I added support for XMR-Stak and DSTM Zcash last week for example.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: codename47 on December 01, 2017, 11:24:56 AM

Quote from: IzzyMoreno on November 30, 2017, 05:55:58 PM

Hi patrike,

is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?

since im using your app my devices are often restarting within 2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour Cheesy

so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.

so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.

Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Cheesy

Not in your Hands

I have the same issue, antminers are restarting when using awesomeminer

Out of the box there are no rules or features in Awesome Miner that reboots an Antminer. There are however two common reason why this happens:

1) You have configured automatic Antminer API configuration in the in Options dialog, Antminer API Access section. If not configured correctly with IP rules, Awesome Miner will continue to detect the miner as being in restricted mode and will try to reconfigure it every 5 minutes.
2) You have a rule where you configured an SSH action to reboot the Antminer.

Both these two scenarios are indicated with SSH connections and SSH commands in the log file of Awesome Miner (toolbar: Tools -> Log file). Can you please check when a reboot happens if you can see any indication of this?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: NetfetMiningCompany on December 01, 2017, 10:13:33 AM

Is there a way to force elevated privileges like programs that need admin access?

That will probably require Awesome Miner to be running as Administrator as well, otherwise it will either fail or you will get prompted via the UAC dialog if you want to run the process.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: tf2addict on December 01, 2017, 04:37:02 AM

Quote from: patrike on November 30, 2017, 05:16:26 PM

Quote from: tf2addict on November 30, 2017, 01:34:45 PM

Having an issue with running a batch file before starting the mining software. The batch file runs ok but when it ends AM stops the managed miner and attempts to restart it. It never even tries to launch the miner software.

Here's the message from Diagnostics after the batch file runs:

Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed

This is the batch file:

C:\DevCon\devcon.exe disable "PCI\VEN_1002&DEV_687F"
timeout /t 3
C:\DevCon\devcon.exe enable "PCI\VEN_1002&DEV_687F"
timeout /t 2
C:\OverdriveNTool\OverdriveNTool.exe -p1Main -p2Main -p3Main -p4Main -p5Main

The miner launches ok if I don't use the batch file so I know the miner configuration is correct.

Is this something you have entered in the Properties of a Managed Miner, Command line section, in the "Batch-file commands" field? Is it working better if you remove the timeouts?
Did you get any additional output from the diagnostics other than the last few lines saying that it failed?

Yes, command line section of the batch file area of the managed miner. The delays don't seem to make a difference.

The only output above the lines I posted were the lines that were executed in the batch file.

I still think I need to see the complete output of the diagnostics to be able to give suggestions. Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: whoisthismanoO on December 01, 2017, 04:02:26 AM

In AW I change the pools for D3 asic but after rebooting asic they are reset and set as they are recorded in the Asic Miner General Configuration tab.
How to fix it?
I want the order of the pools to remain the same as specified in Awesome miner.
Thanks!

Antminers have 3 default pools defined, and the behavior of Antminers is to revert back to these pools when a hard reboot is made. When changing the current pool where the Antminer is mining, the default pools are not changed.

Awesome Miner can configure the default pools as well. Select one or many Antminers and use the toolbar Tools -> Antminer -> Default Pools, to define the 3 default pools.

resurgence

newbie

Activity: 13

Merit: 0

kind of disappointed at the fact that they only limit it to 2 max for free edition... my farm is more than that

apoteos

jr. member

Activity: 53

Merit: 10

I just got started and purchased 2 S9 miners, this looks like a good application to start keeping track of everything. If I get it right I should be able to monitor GPU miners as well, is that correct?

NetfetMiningCompany

jr. member

Activity: 315

Merit: 8

- XMR-Stak miner can be monitored as an External Miner

Does anybody know how to set the config up for this? I have the miner setup but it doesn't pick up any type of monitoring. Just shows as a "miner online"

tf2addict

full member

Activity: 675

Merit: 100

I can't set a pool in the managed miner properties or template properties if I'm using a user-defined miner app. This creates a problem where when you apply a template it doesn't change the pool, it continues using the last pool. I believe when using built-in miner apps the pool also changes when you apply a template, correct?

I'm sure you're doing it like this because AM can't select a pool when launching the user-defined miner but the point is it doesn't need to.

whoisthismanoO

full member

Activity: 173

Merit: 100

What's mean "Failover only (Yes/No)" for ASIC pools ?

Why when i managed pools in AW it is not stored in "Miner Configuration" and than after D3 reboot I need to set up pools again or change it manualy in D3 Web interface?

Thekingace

newbie

Activity: 22

Merit: 0

Quote from: patrike on November 30, 2017, 01:31:52 AM

Quote from: Thekingace on November 29, 2017, 08:27:21 PM

How do I make profit switching work with dual mining?

If it's more profitable to do dual mining, the profit switcher will automatically do that.

Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab.

Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding ~~XMR-stak~~ Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s.

codename47

newbie

Activity: 1

Merit: 0

Quote from: IzzyMoreno on November 30, 2017, 05:55:58 PM

Hi patrike,

is it possible that you have maybe an bug in your software, maybe in the auto api privilege mode?

since im using your app my devices are often restarting within 2 hours after mining start - sometimes after 5 mines, sometimes after 10 .. maybe sometimes after 20 minutes or an hour Cheesy

so really random but 99% within the first 2 hours. i've deactivated already auto profit switch and the fail detection features but i was sure that isn't solving this, because if some of this options are triggered i should got an notification too.

so, for now i've shutdown your app und since then my miners are running already over 4 hours without interruption. All Devices are btw Antminer L3+.

Ahh and about Granat:
Was working now again - as you said, the problem seems to be the http instability over the last week. for sure it was checked/enabled, but possibly not reachable Cheesy

Not in your Hands

I have the same issue, antminers are restarting when using awesomeminer

NetfetMiningCompany

jr. member

Activity: 315

Merit: 8

Quote from: patrike on December 01, 2017, 01:55:55 AM

Quote from: NetfetMiningCompany on November 30, 2017, 11:47:33 PM

I used to really enjoy this software, but now every single miner is flagged and I can't start anything. My uploaded or your downloaded miners. Why? Why is it such a huge headache to use this software now.

I have:

removed MW bytes
turned off AV
exceptions to all programs and folders.

what am i missing. It's is extremely frustrating that the FAQ has no help in this regard. I wanted to upgrade but why......

Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 3
Engine Type: CcMiner, Auto Download: True, EnginePath: C:\Users\\Desktop\XMR STAK\ETN\xmr-stak.exe, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\\AppData\Local\AwesomeMiner\ccminer-2.2.2_3\ccminer-x64-2.2.2-cuda9
C:\Users\\AppData\Local\AwesomeMiner\ccminer-2.2.2_3\ccminer-x64-2.2.2-cuda9 ccminer -o stratum+tcp://mine.sumo.fairpool.xyz:5555 -u -p x -a cryptonight -b 0.0.0.0:4030 (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: False)
Configuration:

Configured command line:
ccminer -o pool -u wallet -p x
Failed to start miner process: Access is denied
Failed to start miner in Diagnostics mode
Diagnostics completed

Quote from: NetfetMiningCompany on December 01, 2017, 12:23:14 AM

This PC isn't a dedicated miner, but it is also happening on the dedicated rigs freshly installed yesterday. Doesn't help. I also can't find out what is flagging it. All AV is off, MW bytes is off, all files removed from quarantines, and the diagnostics app gets blocked trying to find it. I assume it was windows defender which is on anyway with a fresh install..so what then. Oh, my uploaded miners to the app run fine when used outside of AM. It's like AM destroys any file it touches. Only thing I have successfully managed to keep on are my asics. Waste of 70 bucks.

Thanks for sharing the details. According to the diagnostics you have configured your Managed Miner to start with the additional command line "ccminer -o pool -u wallet -p x", which result in that you will start ccminer process and pass in ccminer as a parameter to the ccminer-exe-file. That work not work. I also wonder if you made some custom configuration to what the exe-file would be.

Please open the Properties of your Managed Miner, go to the Command Line section and remove any custom configuration you have made. Then it should work better. If not, please share a new diagnostics output and a screenshot of the configuration of your Managed Miner. Thanks!

Thank you for the sound advise. I will try it when I get to the machine in question. I really like the software. I am just bothered because I like it so much it frustrates me when I cant use it. Its an answer to a problem for me but it keeps teasing me lol. Just another quick question..

Is there a way to force elevated privileges like programs that need admin access?

omshree

full member

Activity: 270

Merit: 100

One suggestion: At the gpu settings, it would be good to be able to select all gpus with "ctrl-a" or something. Thanx for the awesome work!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 503. (Read 703113 times)