[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 557.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: puwaha on August 23, 2017, 11:37:15 PM

These are some really awesome features coming up, Patrike (pun intended). Will the Afterburner GPU Clocking Profiles only be available in the Premium edition? Also, how much will you be charging for the cloud interface?

Many thanks! The profiles are based on the existing Afterburner integration, and will also require Premium Edition.

Preliminary information about the Cloud Services can be found on this page:
http://www.awesomeminer.com/cloud.aspx

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: jamesmbond on August 23, 2017, 10:09:13 PM

Seems the MSIAfterburneragent is not auto-started by AwesomeMiner in 3.2.6 version. I believe this used to work (not sure now) in past version. My Awesome miner remote agent starting up fine on all 3 of my miners but all 3 now no longer auto start the MSI afterburner agent. I have confirmed under Options the command line to executable. Once I manually start up MSI afterburner agent on each node, my Awesomeminer can manage the MSI afterburner settings through the console.

Is this known problem with 3.2.6 beta release?

There are no changes to Afterburner autostart in any of the development versions. Can you clear the settings in the Options dialog, MSI Afterburner section, for:
Auto start path
Username
Password
Then click OK. Then you go back and fill in those 3 fields again. Are the settings applied?

derbien

newbie

Activity: 12

Merit: 1

I tried to move my AM install from PC1 to PC2 (after setting up all Rigs with NeoRouter). I did this with copying the config file from the profile dir.

I am now getting the following error (in the log) when connecting to my managed hosts:
> ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 10.0.0.4:9630
( ... this line repeats a lot ..)

After a while, this results in AM thinking the Miner is offline and trying to restart. Which in turn leads to anything from Claymore running twice to repeated restarts.

I then thought, maybe the profile is wired - lets start over. I then deleted the profile and re-added the miners and their profile manually. The error is still there.
I have not re-installed the client yet. I am also pretty certain the network connection is okay - pings are stable with no lost packets or something.

Any hints on where to look or how to debug this?

Thanks,
Alex

puwaha

sr. member

Activity: 700

Merit: 294

These are some really awesome features coming up, Patrike (pun intended). Will the Afterburner GPU Clocking Profiles only be available in the Premium edition? Also, how much will you be charging for the cloud interface?

jamesmbond

newbie

Activity: 37

Merit: 0

Seems the MSIAfterburneragent is not auto-started by AwesomeMiner in 3.2.6 version. I believe this used to work (not sure now) in past version. My Awesome miner remote agent starting up fine on all 3 of my miners but all 3 now no longer auto start the MSI afterburner agent. I have confirmed under Options the command line to executable. Once I manually start up MSI afterburner agent on each node, my Awesomeminer can manage the MSI afterburner settings through the console.

Is this known problem with 3.2.6 beta release?

Ya-ing

member

Activity: 119

Merit: 100

This software looks really great, thanks for sharing

taserz

sr. member

Activity: 808

Merit: 294

Created AutoTune to saved the planet! ~USA

Quote from: patrike on August 23, 2017, 01:19:15 PM

Quote from: taserz on August 22, 2017, 11:26:54 PM

Quote from: patrike on August 22, 2017, 09:36:33 AM

Quote from: taserz on August 21, 2017, 09:53:36 PM

Will there be support for L3+ and D3? I just bought the license that has Bitmain support for the s9's but I got about 25 other asics coming in and would love to control it with these and I guess upgrade my license.

Antminer L3+ is already supported and quite popular to use together with Awesome Miner.

Antminer D3 will probably work out of the box, but it needs to be confirmed once people are getting their D3's.

Now maybe I am a bit slow. But if I have purely an Asic mine going will profit switching work like will they jump to different pools. So far All I have setup is NiceHash and zpool and slushs pool as a fail safe. Yet I never seen my S9'S leave NiceHash.

L3+ Are landing all next month so I didn't get to play with them yet.

Profit switching is more popular for GPU mining, because the wide range of algorithms and frequent changes on what's most profitable. For ASIC mining, most people simply just use Nicehash and a few more pools as you do, without any profit switching enabled.

Awesome Miner can do profit switching for ASIC's as well, using the External Profit Switching feature is enabled and the Antminer is in Privileged API mode. In this scenario, Awesome Miner will simply set the pool priority of the pools you already have defined, so if zpool becomes more profitable than Nicehash, Awesome Miner can instruct your Antminer to prioritize zpool instead.

Thank you for explaining.

patrike

legendary

Activity: 3346

Merit: 1094

I'm posting a few screenshot of what's in the development pipeline right now. All these features will be included in the next development version, planned to be available within the next few days.

GPU benchmarking

GPU clocking profiles - Set GPU clock and fan speeds when a miner starts and/or stops, using the existing Afterburner integration to work independently of mining software being used.

Awesome Miner Cloud Services - The web interface running in the cloud, with SMS support. Awesome Miner can push all mining statistics to the cloud server, and then you can access it from any Internet connected device without any VPN's or firewall configurations.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Chapster on August 22, 2017, 11:31:01 PM

Hello Patrike,

I just saw that AM was recently updated.
I haven't been reading the thread lately so please forgive me if this has been explained already.

With the new changes, is it finally possible to add a new coin and link it to WTM or CoinWarz ID so that AM can always keep its difficulty and other info updated?

For WTM, yes. One exception is Digibyte that still will require some more work to support this way, as it has so many sub algorithms for the same coin.

In the latest development versions, you can define custom URL's in Options dialog, Statistics section.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: taserz on August 22, 2017, 11:26:54 PM

Quote from: patrike on August 22, 2017, 09:36:33 AM

Quote from: taserz on August 21, 2017, 09:53:36 PM

Will there be support for L3+ and D3? I just bought the license that has Bitmain support for the s9's but I got about 25 other asics coming in and would love to control it with these and I guess upgrade my license.

Antminer L3+ is already supported and quite popular to use together with Awesome Miner.

Antminer D3 will probably work out of the box, but it needs to be confirmed once people are getting their D3's.

Now maybe I am a bit slow. But if I have purely an Asic mine going will profit switching work like will they jump to different pools. So far All I have setup is NiceHash and zpool and slushs pool as a fail safe. Yet I never seen my S9'S leave NiceHash.

L3+ Are landing all next month so I didn't get to play with them yet.

Profit switching is more popular for GPU mining, because the wide range of algorithms and frequent changes on what's most profitable. For ASIC mining, most people simply just use Nicehash and a few more pools as you do, without any profit switching enabled.

Awesome Miner can do profit switching for ASIC's as well, using the External Profit Switching feature is enabled and the Antminer is in Privileged API mode. In this scenario, Awesome Miner will simply set the pool priority of the pools you already have defined, so if zpool becomes more profitable than Nicehash, Awesome Miner can instruct your Antminer to prioritize zpool instead.

Ersan191

newbie

Activity: 14

Merit: 0

Quote from: patrike on August 22, 2017, 09:34:20 AM

Quote from: Ersan191 on August 20, 2017, 11:15:21 PM

The 'Computer Idle' rule doesn't seem to work for me. I don't know if there is some device plugged into the PC generating inputs so it is resetting the counter, or if it just doesn't work. I see the 'no longer idle' event go off when I make a new rule containing that trigger, but the idle event never works.

I will write a small guide for that feature today or tomorrow, where you can compare with your configuration. You need two separate User defined rules for this. One of the triggers in each.

Aye, that's how I have it set up - the idle is never triggering though. I tried setting it up just as a notification to see. The "Not Idle" will trigger as soon as I open Awesome Miner

EDIT: Disregard, I literally wrote a program to poll the windows idle timer and found out it was getting reset every second and closed programs one by one until I figured out the problem - it turns out Corsair LINK does this (and prevents screen saver and monitor off and system sleep in the process). Idle works exactly as expected when Corsair LINK is closed.

Chapster

member

Activity: 75

Merit: 10

Hello Patrike,

I just saw that AM was recently updated.
I haven't been reading the thread lately so please forgive me if this has been explained already.

With the new changes, is it finally possible to add a new coin and link it to WTM or CoinWarz ID so that AM can always keep its difficulty and other info updated?

taserz

sr. member

Activity: 808

Merit: 294

Created AutoTune to saved the planet! ~USA

Quote from: patrike on August 22, 2017, 09:36:33 AM

Quote from: taserz on August 21, 2017, 09:53:36 PM

Will there be support for L3+ and D3? I just bought the license that has Bitmain support for the s9's but I got about 25 other asics coming in and would love to control it with these and I guess upgrade my license.

Antminer L3+ is already supported and quite popular to use together with Awesome Miner.

Antminer D3 will probably work out of the box, but it needs to be confirmed once people are getting their D3's.

Now maybe I am a bit slow. But if I have purely an Asic mine going will profit switching work like will they jump to different pools. So far All I have setup is NiceHash and zpool and slushs pool as a fail safe. Yet I never seen my S9'S leave NiceHash.

L3+ Are landing all next month so I didn't get to play with them yet.

spider703

full member

Activity: 1890

Merit: 148

Used at the time open VPN, easy to configure, the server put on the PC, and 20 clients were connected to it. For AM is the simplest option

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: derbien on August 22, 2017, 10:14:03 AM

Quote from: patrike on August 22, 2017, 09:39:45 AM

Awesome Miner must be running on a Windows computer - either on the same network as your miners or remote (at your home location) over a VPN connection. (...)

Is there any smart & easy way to connect rigs and AM via some 3rd party super-easy VPN Software? I thought about setting up OpenVPN but maybe theres a easier aproach? Just curious what people are using.

I've use neorouter in the past with great success. These days, I just my router's OpenVPN setup. It's a little more tricky to setup, but it's rock-solid.

derbien

newbie

Activity: 12

Merit: 1

Quote from: patrike on August 22, 2017, 09:39:45 AM

Awesome Miner must be running on a Windows computer - either on the same network as your miners or remote (at your home location) over a VPN connection. (...)

Is there any smart & easy way to connect rigs and AM via some 3rd party super-easy VPN Software? I thought about setting up OpenVPN but maybe theres a easier aproach? Just curious what people are using.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Minerdude8 on August 22, 2017, 07:28:15 AM

I'm in the process of starting a small L3+ and D3 farm, can I install awesome miner on a raspberry pi instead of a laptop and have access to it remotely over internet?

Awesome Miner must be running on a Windows computer - either on the same network as your miners or remote (at your home location) over a VPN connection. You use the Awesome Miner application to setup everything and then you also have the option to use the web interface if you want to access monitoring information and do basic operations from any laptop or smartphone.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: taserz on August 21, 2017, 09:53:36 PM

Will there be support for L3+ and D3? I just bought the license that has Bitmain support for the s9's but I got about 25 other asics coming in and would love to control it with these and I guess upgrade my license.

Antminer L3+ is already supported and quite popular to use together with Awesome Miner.

Antminer D3 will probably work out of the box, but it needs to be confirmed once people are getting their D3's.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Ersan191 on August 20, 2017, 11:15:21 PM

The 'Computer Idle' rule doesn't seem to work for me. I don't know if there is some device plugged into the PC generating inputs so it is resetting the counter, or if it just doesn't work. I see the 'no longer idle' event go off when I make a new rule containing that trigger, but the idle event never works.

I will write a small guide for that feature today or tomorrow, where you can compare with your configuration. You need two separate User defined rules for this. One of the triggers in each.

Minerdude8

newbie

Activity: 33

Merit: 0

I'm in the process of starting a small L3+ and D3 farm, can I install awesome miner on a raspberry pi instead of a laptop and have access to it remotely over internet?

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 557. (Read 703512 times)