Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 79. (Read 703512 times)

This is clear. Temperature, hashray, power is not reflected in awesome miner window.

Yes and srbminer 5.0.1 works perfect. some things changed, please look in the srbminer thread.
Set --cpu-threads in commandline, it must be specify.

Hi, Patrike!

After the last update, the api srbminer 4.7 stopped working. The srbminer 5.01 version does not start, it also looks like something with the API.

If you run a 20 minute benchmark, Awesome Miner will ignore the first 6 minutes as there are larger variations in the beginning and it also takes some time before all cards are up to speed. For the last 14 minutes, Awesome Miner will measure the hashrate every 5 seconds and calculate an average value. This average value is what will be the benchmark result.

As you point out, there can be some variations in the hashrate on certain combinations of pools and algorithms.

GPU clocking profiles works on Linux but must be re-created if they initially was created on Windows. The clocking properties on are not exactly the same on Windows and Linux.

EthPill will unfortunately not be loaded automatically.

Hi Patrik
The benchmark of Bminer ver. 16.3 deliver a wrong hashrate data (algo CuckaToo32).
I have tested a rig of 6x 1080ti on the 20 min. run on Nicehash. Benchmark show 4.34 H/s, but in reality if i start normal mining on the Nicehash, hashrate is only 3.7 H/s.  AM ver. 8.0.1 Check please. Regards

Upd. Now show Bminer normal, like in benchmark. Simple Bminer have very big fluctration in hashrate data on Nicehahsh.

What is everyone running as the OS when using the Linux remote agent?

Ubuntu 20.04 desktop edition or server edition or something completely different?

I'd like to keep my OS install as lean as possible but wasn't sure of it is a pain to install the graphics drivers on the server edition (or if it is even supported).

EDIT: I went ahead and installed 20.04 on a test rig with a single 1070.  Added the latest Nvidia driver and screen (not part of base desktop install) and of course the remote agent.

Added the new rig to AM and created a GPU Clocking Profile.

Started mining, which is working fine, but the GPU Clocking Profile is being ignored.

Are GPU clocking profiles not supported on Ubuntu?

EDIT2:  Will AM automatically start the ETH pill on rigs with 1080/1080Ti GPUs?

Hey Sxemini

Works perfectly! 

Thank you 

Have fun!  =8^)

Ah ... yea I have to admit I did not test that case xD It sets it to "AUTO" internally for pool switching ... but yes over CMD that does not work. Will fix it with 1.08 - use --coin in the meanwhile for this function.

Go to online services and looking for your pool,click edit and add the pers string ^^

Hey Sxemini

Whilst adding the personalization string to custom pools is easy enough, (and works fine), I haven't found a satisfactory way of adding it to the default preset profit switching pools.

So, the question is, "How do I add the correct personalization strings to the preset profit switching pools?"

Also, see my previous reply to Patrike, where I describe a problem that occurs when I try using the preset pools in conjunction with my custom pools.

Have fun!  =8^)

Is this only a profitswitching problem? Because i have no problems mining 192_7, 144_5 or beamhashIII with lolminer
You must set the --pers string in the pool config.



Yes patrike this is working.

Hey Lolliedieb

I tried using --pers AUTO, at the comandline, but lolMiner returns the following error...

Ok, just thought I'd try something stupid, and added four underscores in front of the AUTO argument, and it worked - although with 100% rejection rate.

Have fun!  =8^)

Hey Patrike,


At the moment, I am only using the default pre-defined pools in AM.

I just added custom pools for both BCGold, and Zclassic,  setting MiningPoolHub as the target pool.

Created a pool group with those two custom pools.

I set the personalization string for Zclassic to ZcashPoW, (found the pers strings at https://forum.bitcoingold.org/t/list-of-equihash-coins-by-implementation-parameters/1929 ).

Disabled all pre-defined pool sites in Options -> Managed Profit Switching (ZPool, MPH, etc).

Selected Add additional pools to Managed Profit Switching, and added my created pool group.

Attempted to benchmark using the Enabled Managed Profit Switching pools option, and saw that Equihash Zero (192.7), and ZHash (Equihash 144.5) with lolMiner as the mining software was available, and they benchmarked fine.

If I re-enable the default pre-defined pools in Options -> Managed Profit Switching and attempt to benchmark Equihash Zero, AM uses the address equihash144.sea.mine.zpool.ca:2192, and doesn't use the --pers parameter. As a side note, the address should be equihash192.sea.mine.zpool.ca:2192 (copy - paste - forget to edit is too easy to do, unfortunately).

So, currently, if I want to use lolMiner alongside the rest of the mining software that AM controls, it appears that I would have to make a custom pool for each coin on each pre-defined pool, group those custom pools, then disable all the default pre-defined pools. It's a bit of work, but it's do-able

Have fun!  =8^)

Not sure here, too what happens in AM, but there are two ways of using this algos.
Either --algo or --coin. If you still can use --coin you can use --coin ZEL to configure ZelHash + right personalization and --coin AUTO144_5 for --algo  EQUI144_5 with --pers AUTO (aka pool selection).
If --pers is not passed forwards that seems to be an issue with awesome miner / a bit too tight template / not giving the opportunity to add custom parameters outside of their template. If so that will be interesting for the next algos I am adding, because they will add quite a lot custom params  Not mentioning yet which it will be 

In the Properties of your Pool in Awesome Miner, where you specify URL and worker name, you will also find the field "Personalization string". If you fill in "BgoldPoW" here, Awesome Miner will add "--pers BgoldPoW" when you start lolMiner.

If this doesn't work, can you please send me a few screenshots? Thanks!

Thanks for the clarification.

Awesome Miner recently moved from using --coin to use --algo instead. I like the new concept with algorithms instead of coins so thanks for implementing it!

Some other mining software supports "--pers auto" for Nicehash and similar profit switching pools. Is there a similar concept with lolMiner without having to use the older --coin concept? Thanks!

Please go to the Options dialog, Balance section, Wallet balance. If you edit your Litecoin entry (or the one with a failure), select the first address in the list and click the Test button - is that working? Then move on to select the next and Test it. Are all working here?

Thanks for the feedback. Yes, this is a feature request I get from time to time and it will probably be something for the future. I agree that it would make sense to have.

Just to confirm, the coin is always visible but sometimes the statistics shows all zeros or similar? If that's the case, it doesn't sound like a problem in Awesome Miner itself. This coin isn't part of the main listing at the provider, and the reason might be because of this instability.