[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 82.

joseph32

member

Activity: 418

Merit: 21

Quote from: patrike on September 04, 2020, 11:27:15 AM

Quote from: joseph32 on September 03, 2020, 11:06:01 PM

Hi Patrik,

I have a fresh suggestion. For every miner AM already has a console output. Is it possible to make a tab/page with console outputs of all the connected miners? Like the groups tab, but for all miners. Maybe with a configurable height of each output and maybe a configurable update/refresh rate. But, if possible, with a header which includes the rig-name and the revenue+profit.

Hi Joseph. Thanks for the request. So basically a way to see multiple consoles outputs in "cards" similar to the Groups tab, but a little larger cards to actually be able to fit the output.

Correct

I think this can be very usefull for others too.

Sio34

sr. member

Activity: 372

Merit: 250

https://xtzbakery.com/

I have a strange error after updating, when trying to run - "no connection to the kernel, restart the computer"

soothaa

hero member

Activity: 1151

Merit: 528

The project in your sig is interesting. Everything came back clean on VirusTotal but all my machines are linux based currently.

soothaa

hero member

Activity: 1151

Merit: 528

Quote from: patrike on September 04, 2020, 11:28:05 AM

Hello,
Can you please try if the following works better?
bash -c "sudo /root/utils/oc_dpm.sh 1800 1100 950"

Did not work either Sad

Code:

9/4/20 6:49:58 PM.297 [008] [S][ManagedMiner#51 - 192.168.2.135] Executing batch commands as admin: bash -c "/root/utils/oc_dpm.sh 1800 1100 950"
9/4/20 6:49:58 PM.298 [008] [S]Set execution permission for: /root/.config/AwesomeMinerService/teamredminer-v0.7.9-linux_1/teamredminer-v0.7.9-linux/awesome.sh
9/4/20 6:49:58 PM.304 [008] [S][ManagedMiner#51 - 192.168.2.135] Sucessfully executed batch commands

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: soothaa on September 04, 2020, 07:21:40 AM

Good morning, I'm having a strange issue with AM.

I execute this command before miner start on my Linux worker: "sudo /root/utils/oc_dpm.sh 1800 1100 950"

Remote Log Lines:

Code:

9/2/20 12:06:31 PM.476 [007] [S][ManagedMiner#51 - 192.168.2.135] Executing batch commands as admin: sudo /root/utils/oc_dpm.sh 1800 1100 950
9/2/20 12:06:31 PM.476 [007] [S]Set execution permission for: /root/.config/AwesomeMinerService/phoenixminer_5.1c_linux.tar_1/PhoenixMiner_5.1c_Linux/awesome.sh
9/2/20 12:06:32 PM.491 [007] [S][ManagedMiner#51 - 192.168.2.135] Sucessfully executed batch commands

The process is running as root, and when I run the script via SSH as root it executes just fine.

However, this script does not seem to be working when executed via AM.

Any ideas?

EDIT: Confirmed it also works by running via System -> Execute Remote Command

Hello,
Can you please try if the following works better?
bash -c "sudo /root/utils/oc_dpm.sh 1800 1100 950"

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on September 03, 2020, 11:06:01 PM

Hi Patrik,

I have a fresh suggestion. For every miner AM already has a console output. Is it possible to make a tab/page with console outputs of all the connected miners? Like the groups tab, but for all miners. Maybe with a configurable height of each output and maybe a configurable update/refresh rate. But, if possible, with a header which includes the rig-name and the revenue+profit.

Hi Joseph. Thanks for the request. So basically a way to see multiple consoles outputs in "cards" similar to the Groups tab, but a little larger cards to actually be able to fit the output.

soothaa

hero member

Activity: 1151

Merit: 528

Good morning, I'm having a strange issue with AM.

I execute this command before miner start on my Linux worker: "sudo /root/utils/oc_dpm.sh 1800 1100 950"

Remote Log Lines:

Code:

9/2/20 12:06:31 PM.476 [007] [S][ManagedMiner#51 - 192.168.2.135] Executing batch commands as admin: sudo /root/utils/oc_dpm.sh 1800 1100 950
9/2/20 12:06:31 PM.476 [007] [S]Set execution permission for: /root/.config/AwesomeMinerService/phoenixminer_5.1c_linux.tar_1/PhoenixMiner_5.1c_Linux/awesome.sh
9/2/20 12:06:32 PM.491 [007] [S][ManagedMiner#51 - 192.168.2.135] Sucessfully executed batch commands

The process is running as root, and when I run the script via SSH as root it executes just fine.

However, this script does not seem to be working when executed via AM.

Any ideas?

EDIT: Confirmed it also works by running via System -> Execute Remote Command

joseph32

member

Activity: 418

Merit: 21

Hi Patrik,

I have a fresh suggestion. For every miner AM already has a console output. Is it possible to make a tab/page with console outputs of all the connected miners? Like the groups tab, but for all miners. Maybe with a configurable height of each output and maybe a configurable update/refresh rate. But, if possible, with a header which includes the rig-name and the revenue+profit.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on September 02, 2020, 09:53:32 PM

Hi Patrik,

can you add please CTXC Cortex as a coin? I can add the .json to statistic providers, but I prefer a real coin with a picture

Thank you!

Thanks for the feedback. I will add this in the next release.

sxemini

member

Activity: 1558

Merit: 69

Quote from: joseph32 on September 02, 2020, 09:53:32 PM

Hi Patrik,

can you add please CTXC Cortex as a coin? I can add the .json to statistic providers, but I prefer a real coin with a picture

Thank you!

You can add a pic by yourself.

narousberg

legendary

Activity: 1753

Merit: 1007

Quote from: patrike on September 01, 2020, 09:48:21 AM

Quote from: narousberg on September 01, 2020, 02:00:01 AM

Hi Patrike, reciving your message, will wait next update.
Another thing: Etherium price in Coin tab is wrong (to low), but if i switch manualy to ETH mining, day profit in miner tab will be viewed correct.
I am use default coin and statistic provider properties, WhatToMine - on , CoinsToMine - on, Coincalculators -on
Please check. Regards.

Please let me know how you configured your Exchange filter mode and minimum exchange volume. Both are located on the Statistics Providers page.
Do you have the same profile hashrate on the Coins tab as the actual hashrate you have when you are mining?

I have tested with different filter settings, volume 0,01 0,1, disabled. No exchange filters
Yes, profile hashrate in Coin Tab same as the actual hashrate.
This problem only with ETH

Upd: The problem with wrong ETH profit statistic data was gone after i have changed TT-Miner ver. 5.03 to NBMiner 31.1 But still not show correct price in Coins tab.
Explain me please how it can be possible??? I have no plan....

Another thing i have found: If you use NBMiner 31.1 you need explicit write "stratum+tcp:// " to pool connection string, otherwiese no connection.

I use this pool: stratum+tcp://ru-eth.hiveon.net:4444

Regards

I have sent a email with printscreens...

joseph32

member

Activity: 418

Merit: 21

Hi Patrik,

can you add please CTXC Cortex as a coin? I can add the .json to statistic providers, but I prefer a real coin with a picture

Thank you!

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.8.11 (Development preview of 8.0)

GPU mining
  - The GPU information dialog (View GPU Details) can also show information for Linux based systems
Features
  - Improved miner list filtering by introducing profiles, where filters can be saved with a name and activated with a click
  - The feature to move miners to a group is made available via the web interface
Integration
  - Added wallet balance support for ARRR and updated for KMD
Mining software
  - CryptoDredge 0.25.1
  - XmRig 6.3.3
  - GMiner 2.22
Corrections
  - Correction to display of GPU PCI Bus ID when using automatic mapping to system monitoring
  - Correction to AMD GPU memory display
  - Correction to rule action to set firmware mining profile

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on September 01, 2020, 02:00:01 AM

Hi Patrike, reciving your message, will wait next update.
Another thing: Etherium price in Coin tab is wrong (to low), but if i switch manualy to ETH mining, day profit in miner tab will be viewed correct.
I am use default coin and statistic provider properties, WhatToMine - on , CoinsToMine - on, Coincalculators -on
Please check. Regards.

Please let me know how you configured your Exchange filter mode and minimum exchange volume. Both are located on the Statistics Providers page.
Do you have the same profile hashrate on the Coins tab as the actual hashrate you have when you are mining?

narousberg

legendary

Activity: 1753

Merit: 1007

Hi Patrike, reciving your message, will wait next update.
Another thing: Etherium price in Coin tab is wrong (to low), but if i switch manualy to ETH mining, day profit in miner tab will be viewed correct.
I am use default coin and statistic provider properties, WhatToMine - on , CoinsToMine - on, Coincalculators -on
Please check. Regards.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: toptek12 on August 30, 2020, 04:48:53 PM

I got a request

is there any way you can show the memory temperatures and the junction temperatures in awesome miner for the 5000 series AMD GPU.

Thanks for the suggestion. This isn't supported today, but I've noted your request.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on August 30, 2020, 02:58:27 AM

Other thing: I have once more time try to create a execution chain of rules.
I define a "rule1" where i do a some action of "rule1" and call execution of "rule2" over "Run actions of another rule"
in the "rule2" i do some action and after this call a "rule3" over "Run actions of another rule"
Problem is, that this chain logic work only in "rule1" but not in "rule2". Running of "rule3" from "rule2" will be ignored.

Regards

Upd: Once more time read your previous post about rule logic. Now i am understand that i cant realise my chain logic. Patrike can you change "run actions of another rule" setting and add possibilty to select more then only one "another rule". I have many miners and i want only with one rule change parameters of many miners.

The reason for the behavior of only allowing one rule to execute the actions of another, but not a longer chain of redirects, is to avoid loops of actions.

If you have rule actions that point like this, A -> B -> C -> D -> A, you would have an endless loop. There are of course ways for Awesome Miner to detect loops, but the initial idea was to avoid too complex scenarios. I can of course see if there are any good ways to support more then one redirect level.

The current concept works fine if you have a single rule with a number of actions you want to call from many other rules. As you point out, it's however not possible to have Rule 1 run Rule 2 where you have some actions and then continue from there to Rule 3 where you run a few more rules.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: sxemini on August 31, 2020, 04:10:06 AM

Quote from: patrike on August 29, 2020, 05:24:33 AM

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

Hi patrike,

for nvndia cards, it works without problems. AMD not working, on some rigs it show 0 GB and on some rigs it show only the same information like before the update. Drivers i tested are 19.7.4 and 18.6.1.

Thanks for all feedback.

I've identified two issues that will be corrected in the next update:
- (@narousberg) When using mining software that didn't report PCI Bus ID over their API, Awesome Miner should try to resolve the PCI Bus ID anyway but it wasn't always displayed in the GPU tab for this scenario.
- (@sxemini) I identified a problem with reading AMD GPU Memory size on Windows

sxemini

member

Activity: 1558

Merit: 69

Quote from: patrike on August 29, 2020, 05:24:33 AM

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

Hi patrike,

for nvndia cards, it works without problems. AMD not working, on some rigs it show 0 GB and on some rigs it show only the same information like before the update. Drivers i tested are 19.7.4 and 18.6.1.

toptek12

member

Activity: 126

Merit: 10

I got a request

is there any way you can show the memory temperatures and the junction temperatures in awesome miner for the 5000 series AMD GPU.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 82. (Read 703148 times)