[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 83.

narousberg

legendary

Activity: 1753

Merit: 1007

Quote from: patrike on August 29, 2020, 03:32:04 PM

Quote from: narousberg on August 29, 2020, 02:13:08 PM

Quote from: patrike on August 29, 2020, 05:24:33 AM

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

Yes, i am on Linux (Hive) + NVIDIA. But i saw PCI BUS ID info after first installing of version where this future was added, not understand why this information gone after a while? Huh

At the moment i can see: GPU Vendor name and Memory size. That is all.
AwesomeMiner ver. 7.8.10
Installed NVIDIA Driver 400.100 (400.82 not show too)
Hive ver. 0.6-155 (latest at the moment)
Win. 10 pro build 2004
Regards

Thanks for all details.
1) Please send me a screenshot of the GPU tab in Awesome Miner
2) Please run the following command (in Linux) and share the output with me:

Code:

nvidia-smi --query-gpu=name,pci.bus,index,temperature.gpu,utilization.gpu,fan.speed,power.draw,clocks.current.graphics,clocks.current.memory,pci.sub_device_id,memory.total --format=csv,noheader,nounits

screenshot sent on the email. (over awesomeminer.com website)

Other thing: I have once more time try to create a execution chain of rules.
I define a "rule1" where i do a some action of "rule1" and call execution of "rule2" over "Run actions of another rule"
in the "rule2" i do some action and after this call a "rule3" over "Run actions of another rule"
Problem is, that this chain logic work only in "rule1" but not in "rule2". Running of "rule3" from "rule2" will be ignored.

Regards

Upd: Once more time read your previous post about rule logic. Now i am understand that i cant realise my chain logic. Patrike can you change "run actions of another rule" setting and add possibilty to select more then only one "another rule". I have many miners and i want only with one rule change parameters of many miners.

GODLIKEE

newbie

Activity: 26

Merit: 2

Quote from: patrike on August 29, 2020, 05:24:33 AM

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

new Memory Size/Manufacturer showing on windows with AMD cards. PCI Bus ID shows

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: patrike on August 29, 2020, 03:28:51 PM

Quote from: MoparMiningLLC on August 29, 2020, 10:01:02 AM

Quote from: patrike on August 29, 2020, 09:46:59 AM

Quote from: MoparMiningLLC on August 29, 2020, 08:07:17 AM

Quote from: patrike on August 29, 2020, 05:21:15 AM

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

used the exact process described on your site. microsoft telnet

Can you please try with PuTTY?

I have with both Telnet and PuTTY - the issue I have is the same with both.

this step fails to work for me first

and when I proceed to the next step anyways:

type "vi /home/inno_py/inno_config.py" to edit your config file

it opens but as read only

the step:

click the letter i on the keyboard to enable edit mode in vi

does nothing. I can edit the file but it does not exit readonly and does not give me a way to save as the steps below do nothing.

Click "ESC" on the keyboard to exit Edit Mode
click ":wq" and Enter to save the file

Please run the following command to re-mount the file system as read-write, as it's read-only by default:

Code:

mount / -o rw,remount

The insert-operation is probably disabled because the file was read-only.

ok will try that tonight when home again.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on August 29, 2020, 02:13:08 PM

Quote from: patrike on August 29, 2020, 05:24:33 AM

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

Yes, i am on Linux (Hive) + NVIDIA. But i saw PCI BUS ID info after first installing of version where this future was added, not understand why this information gone after a while? Huh

At the moment i can see: GPU Vendor name and Memory size. That is all.
AwesomeMiner ver. 7.8.10
Installed NVIDIA Driver 400.100 (400.82 not show too)
Hive ver. 0.6-155 (latest at the moment)
Win. 10 pro build 2004
Regards

Thanks for all details.
1) Please send me a screenshot of the GPU tab in Awesome Miner
2) Please run the following command (in Linux) and share the output with me:

Code:

nvidia-smi --query-gpu=name,pci.bus,index,temperature.gpu,utilization.gpu,fan.speed,power.draw,clocks.current.graphics,clocks.current.memory,pci.sub_device_id,memory.total --format=csv,noheader,nounits

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: MoparMiningLLC on August 29, 2020, 10:01:02 AM

Quote from: patrike on August 29, 2020, 09:46:59 AM

Quote from: MoparMiningLLC on August 29, 2020, 08:07:17 AM

Quote from: patrike on August 29, 2020, 05:21:15 AM

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

used the exact process described on your site. microsoft telnet

Can you please try with PuTTY?

I have with both Telnet and PuTTY - the issue I have is the same with both.

this step fails to work for me first

and when I proceed to the next step anyways:

type "vi /home/inno_py/inno_config.py" to edit your config file

it opens but as read only

the step:

click the letter i on the keyboard to enable edit mode in vi

does nothing. I can edit the file but it does not exit readonly and does not give me a way to save as the steps below do nothing.

Click "ESC" on the keyboard to exit Edit Mode
click ":wq" and Enter to save the file

Please run the following command to re-mount the file system as read-write, as it's read-only by default:

Code:

mount / -o rw,remount

The insert-operation is probably disabled because the file was read-only.

narousberg

legendary

Activity: 1753

Merit: 1007

Quote from: patrike on August 29, 2020, 05:24:33 AM

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

Yes, i am on Linux (Hive) + NVIDIA. But i saw PCI BUS ID info after first installing of version where this future was added, not understand why this information gone after a while? Huh

At the moment i can see: GPU Vendor name and Memory size. That is all.
AwesomeMiner ver. 7.8.10
Installed NVIDIA Driver 400.100 (400.82 not show too)
Hive ver. 0.6-155 (latest at the moment)
Win. 10 pro build 2004
Regards

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: patrike on August 29, 2020, 09:46:59 AM

Quote from: MoparMiningLLC on August 29, 2020, 08:07:17 AM

Quote from: patrike on August 29, 2020, 05:21:15 AM

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

used the exact process described on your site. microsoft telnet

Can you please try with PuTTY?

I have with both Telnet and PuTTY - the issue I have is the same with both.

this step fails to work for me first

and when I proceed to the next step anyways:

type "vi /home/inno_py/inno_config.py" to edit your config file

it opens but as read only

the step:

click the letter i on the keyboard to enable edit mode in vi

does nothing. I can edit the file but it does not exit readonly and does not give me a way to save as the steps below do nothing.

Click "ESC" on the keyboard to exit Edit Mode
click ":wq" and Enter to save the file

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: MoparMiningLLC on August 29, 2020, 08:07:17 AM

Quote from: patrike on August 29, 2020, 05:21:15 AM

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

used the exact process described on your site. microsoft telnet

Can you please try with PuTTY?

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: patrike on August 29, 2020, 05:21:15 AM

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

used the exact process described on your site. microsoft telnet

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on August 28, 2020, 03:00:20 PM

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

The current support for Memory Size and Memory manufacturer looks like this:
- nVidia Windows: Memory size + manufacturer supported
- AMD Windows: Memory size
- nVidia Linux: Memory size
- AMD Linux: Memory size (but not with a very stable way of detecting it).

Was it nVidia on Linux you where running? And you don't see PCI Bus ID and not the new Memory Size/Manufacturer on the GPU tab in Awesome Miner?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: MoparMiningLLC on August 28, 2020, 02:28:34 PM

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

Which Telnet/SSH client did you use when you connected? I wonder if it could be some issue here where it didn't display the telnet output correctly when you were trying to work with a file editor.

narousberg

legendary

Activity: 1753

Merit: 1007

Hi patrike, have some problems

GPU tab not show more PCI BUS ID, Memory type, size
NIMIQ coin not more show price data, coin is present, but without data from WhatToMine. Not understand why, before was all ok.
Rigs on HiveOS.

upd. Statistic come back. Problem with displaying GPU BUS ID, Memory manafacturer, etc. still persist

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

darn still no one with experience getting AM to work with innosilicon miners? I have tried to follow the provided instructions, nothing happened and AM still does not connect - I need a walk thru video or something lol.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.8.10 (Development preview of 8.0)

GPU mining
- Display of GPU memory size and GPU memory manufacturer on the GPU tab
Features
- Improved miner list filtering where filtering can be applied on a number of properties. Configurable via the toolbar Find, Property filter.
- For large mining operations where the concept of Global command queue is displayed, use right click to be display a context menu where the queue can be cleared
- Miners can be added to Virtual miner groups via the Miners tab, via the context menu, Group section
- Virtual miner groups can be opened from the Groups tab - opened in Miners tab with a filter for the selected virtual miner group
User interface
- Miner list indicates if a filter is active, including a button to clear all active filters
Corrections
- Web interface can redirect to a the requested page after signing in
- Correction to web dashboard circle graph

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on August 25, 2020, 02:05:06 PM

Hi Patrike, thanks for GPU ID info, this is very helpful now. Maybe in future you will completly implement feature "View GPU details" for Linux rigs too.
I have some another suggestions:
Can you add in GPU miner context menu a possibility to direct open a ssh terminal window for selected miner. Of course this need to be configured in Options first, login/password, port, locale etc.
Can you add a colors in GPU temp in web interface, if user have many rigs and fast scroll, offten dificult to see if some cards have overtemp.
Can you add a "Restart" button in web interface for remote restarting Awesome Miner programm. Sometimes this helps to run programm correctly.

Regards

Thanks for all feedback.

You can launch external applications, like SSH clients, that support command line parameters using the rules and Action menu. Please see the section "Example: Launch Remote Desktop for selected Managed Miner":
https://support.awesomeminer.com/support/solutions/articles/35000085907-rules-detect-mining-issues-and-automate-tasks

narousberg

legendary

Activity: 1753

Merit: 1007

Hi Patrike, thanks for GPU ID info, this is very helpful now. Maybe in future you will completly implement feature "View GPU details" for Linux rigs too.
I have some another suggestions:
Can you add in GPU miner context menu a possibility to direct open a ssh terminal window for selected miner. Of course this need to be configured in Options first, login/password, port, locale etc.
Can you add a colors in GPU temp in web interface, if user have many rigs and fast scroll, offten dificult to see if some cards have overtemp.
Can you add a "Restart" button in web interface for remote restarting Awesome Miner programm. Sometimes this helps to run programm correctly.

Regards

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: sxemini on August 25, 2020, 04:50:41 AM

Patrike can you add memory manufacturer and memory size to GPU tab?

Adding GPU memory size for nVidia should be easy. A bit more difficult for AMD for some reason, but I will look into it. Thanks for the feedback.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 7.8.9 (Development preview of 8.0)

Important:
Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later.
- This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
- For Windows 7, Windows 8 and older versions of Windows 10, please download and install:
https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
Awesome Miner Antminer firmware
- Antminer firmware S17, S17+, T17, T17+ version 2.0.3 released
- The rule action to set Firmware mining profile has been improved to allow any mining profile property to be set
GPU mining
- Display of PCI Bus ID on the GPU tab
Features
- Use colors to indicate if a miner group (on the group page) has one or more miners not hashing or not running at all
- Display of ideal hashrate and number of hashing miners is displayed on the Groups page in the web interface
Mining software
- Nanominer 1.10.1
- Lolminer 1.07
Corrections
- Correction to Reboot button in main toolbar didn't correctly make us of the configured reboot method (web or SSH)
- Correction to Mining Pool Hub pool balance

sxemini

member

Activity: 1558

Merit: 69

Quote from: sereupin on August 22, 2020, 04:12:01 AM

Hello,

I have installed in my pc the old version 7.2.12 and it is not able to upgrade to the newer version.

there is a middle old version like 7.3 or 7.5 to try to download before install the newer?

I am not able to update as I am not able to uninstall because it ask the AwesomeMiner.msi package (i guess the old one)

Thank you

edit: solved thank you

Uninstall old version, download new package and install new.

Quote from: patrike on August 25, 2020, 04:34:53 AM

Quote from: narousberg on August 23, 2020, 01:36:04 AM

Hi Patrrike, please add small extra to GPU tab and display a BUS ID info of connected GPU. If rig on Linux, you cant find this info in AM, That will help for diagnostic. And thanks for rule explanation, will try once more time )))

Regards

I agree that Pci Bus ID should be displayed on the GPU tab. I will add this.

Patrike can you add memory manufacturer and memory size to GPU tab?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on August 23, 2020, 01:36:04 AM

Hi Patrrike, please add small extra to GPU tab and display a BUS ID info of connected GPU. If rig on Linux, you cant find this info in AM, That will help for diagnostic. And thanks for rule explanation, will try once more time )))

Regards

I agree that Pci Bus ID should be displayed on the GPU tab. I will add this.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 83. (Read 703113 times)