Baikal Giant X10 | Bitcointalksearch.org

polytone

newbie

Activity: 11

Merit: 0

Quote from: Donis0007 on March 27, 2021, 08:08:21 AM

Hei,

Maybe someone can explain how to upgrade Baikal Giant X10 to new version v2.2? maybe there is some video?

just download the image file and burn that image to sd card.

Donis0007

newbie

Activity: 4

Merit: 0

Hei,

Maybe someone can explain how to upgrade Baikal Giant X10 to new version v2.2? maybe there is some video?

Shorty2520

member

Activity: 165

Merit: 11

Anyone using these devices? I turned all four offline summer last year. The prices for electricity are to high over here.

Also the difficult raised so high, it‘s frustrating. Would ne nice to get somewhere the amount of coins like 2017/2018.

Are there new models coming out you are looking for?

VinZz972

newbie

Activity: 13

Merit: 0

Hello,
Since 1 week, I can't use my miner (Firmware V2.2).
I have "no device running".
Pools are alive and active but all goes in "discarded"
(On Suprnova & Zergpool).

Have you the same problem ?

miningcoins

newbie

Activity: 25

Merit: 0

Optimum fan speed 27% to avoid the fan winding up and down without being too loud.

scofield333

newbie

Activity: 1

Merit: 0

Good day. Baikal will resale and update more for baikal x10???

CooLLeR777

newbie

Activity: 13

Merit: 0

#Кyплю #Baikal

Кyплю Baikal x10
Кyплю Baikal BK-G28

https://t.me/COOLLER777

so1203

newbie

Activity: 8

Merit: 0

10.5 ghs one mining dutch at the moment,

any plans to release and support new algos?

elmond

newbie

Activity: 49

Merit: 0

Quote from: Andartis on August 11, 2019, 09:10:55 AM

Quote from: ?? on ??

Hi, is anyone mining Groestl on BKX using new firmware v2.2?

I have upgraded and some of my BKX has many rejected shares, some keep on rebooting after about 10 to 15 mins. There is only couple which is stable on Groestl but very small percentage.

I am mining on MPH at the moment.

Kindly share your experience on Groestl and on which pool.

regards

Mine ran stable on Groestl on suprnova.

What is currently the best option to mine with these? I checked Nicehash vs. ZPool vs. Zergpool. It seems Zergpool on Qubit performed best so far the last days. But now it seems not to find Blocks. Nicehash was consistent, but lower profits. Zpool was way behind profit wise.

what is the average groestl mined on suprnova?

i'm on mining-dutch.nl around 2.5 GRS or 0.00005 BTC

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: ?? on ??

Hi, is anyone mining Groestl on BKX using new firmware v2.2?

I have upgraded and some of my BKX has many rejected shares, some keep on rebooting after about 10 to 15 mins. There is only couple which is stable on Groestl but very small percentage.

I am mining on MPH at the moment.

Kindly share your experience on Groestl and on which pool.

regards

Mine ran stable on Groestl on suprnova.

What is currently the best option to mine with these? I checked Nicehash vs. ZPool vs. Zergpool. It seems Zergpool on Qubit performed best so far the last days. But now it seems not to find Blocks. Nicehash was consistent, but lower profits. Zpool was way behind profit wise.

Boriss

full member

Activity: 728

Merit: 115

Can someone please tell me is it possible to remove heatsink from the hashing board on x10.
Is it on the chips with some kind of thermal glue or something else?

elmond

newbie

Activity: 49

Merit: 0

Quote from: muumio on June 13, 2019, 04:10:46 AM

Quote from: EdwinCoin on June 07, 2019, 08:32:10 AM

Quote from: elmond on June 06, 2019, 04:14:39 AM

Quote from: GunsN on June 04, 2019, 03:51:10 AM

Does anyone try this new firmware?

perfect 10GHs groestl mining

Quote from: EdwinCoin on June 06, 2019, 12:54:29 AM

It does not work, time waste!! The TF will become unreadable after the upgrade. Then I rewrote to the previous firmware, it works.

is this your first time program the sd card? you may missing one important step - remove all the partition on the sd card

Not my first time. I successfully upgrade the firmware on X10 last year, with Win32diskImager. I think remove all partition is not necessary. But I gave a try as your said, still does not work. Did you upgrade?

update/////Actually, the new firmware works on the X10, but the new file system is unreadable for win7, and I can not set the static IP address. And another issue is that the new setting will lost after power off, such as pool and web password. I give up the upgrade and back to v1.7.

New firmware seems to be working, but there is no hash in the pool with groestl. Any other algo are working fine.
Can you say what´s wrong?

do you check the miner page? i observe the raspberry pi OS instability on this newest build since they move to Armbian Based

Randrras

member

Activity: 303

Merit: 16

Same situation.... Huh

muumio

newbie

Activity: 2

Merit: 0

Quote from: EdwinCoin on June 07, 2019, 08:32:10 AM

Quote from: elmond on June 06, 2019, 04:14:39 AM

Quote from: GunsN on June 04, 2019, 03:51:10 AM

Does anyone try this new firmware?

perfect 10GHs groestl mining

Quote from: EdwinCoin on June 06, 2019, 12:54:29 AM

It does not work, time waste!! The TF will become unreadable after the upgrade. Then I rewrote to the previous firmware, it works.

is this your first time program the sd card? you may missing one important step - remove all the partition on the sd card

Not my first time. I successfully upgrade the firmware on X10 last year, with Win32diskImager. I think remove all partition is not necessary. But I gave a try as your said, still does not work. Did you upgrade?

update/////Actually, the new firmware works on the X10, but the new file system is unreadable for win7, and I can not set the static IP address. And another issue is that the new setting will lost after power off, such as pool and web password. I give up the upgrade and back to v1.7.

New firmware seems to be working, but there is no hash in the pool with groestl. Any other algo are working fine.
Can you say what´s wrong?

elmond

newbie

Activity: 49

Merit: 0

Quote from: GunsN on June 07, 2019, 12:48:27 AM

Quote from: elmond on June 06, 2019, 04:14:39 AM

Quote from: GunsN on June 04, 2019, 03:51:10 AM

Does anyone try this new firmware?

perfect 10GHs groestl mining

Quote from: EdwinCoin on June 06, 2019, 12:54:29 AM

It does not work, time waste!! The TF will become unreadable after the upgrade. Then I rewrote to the previous firmware, it works.

is this your first time program the sd card? you may missing one important step - remove all the partition on the sd card

Hello, did you try new firmware?
is it different profit?

i try the groestl algo but the profit not as goos as myrgro, so i still mining myrgro now.

EdwinCoin

newbie

Activity: 11

Merit: 0

Quote from: elmond on June 06, 2019, 04:14:39 AM

Quote from: GunsN on June 04, 2019, 03:51:10 AM

Does anyone try this new firmware?

perfect 10GHs groestl mining

Quote from: EdwinCoin on June 06, 2019, 12:54:29 AM

It does not work, time waste!! The TF will become unreadable after the upgrade. Then I rewrote to the previous firmware, it works.

is this your first time program the sd card? you may missing one important step - remove all the partition on the sd card

Not my first time. I successfully upgrade the firmware on X10 last year, with Win32diskImager. I think remove all partition is not necessary. But I gave a try as your said, still does not work. Did you upgrade?

update/////Actually, the new firmware works on the X10, but the new file system is unreadable for win7, and I can not set the static IP address. And another issue is that the new setting will lost after power off, such as pool and web password. I give up the upgrade and back to v1.7.

GunsN

full member

Activity: 262

Merit: 100