Pages:
Author

Topic: BBQCoin, the coin you want to eat. - page 14. (Read 143109 times)

legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 07:12:49 PM
also another mistake alot of ppl do, is turning of queue @ cgminer, and expiry/scantime way too low. noqueue/low scan+expiry was only needed on getwork, since everything is using stratum your work will be generated localy and your no longer affect that much by latency. its sad that alot of "guides" still say you should this stupid behaviour :S

This one Smiley
what dont you understand about it?
if your using default settings for cgminer, your fine and dont need to worry
newbie
Activity: 36
Merit: 0
November 24, 2013, 07:10:35 PM
also another mistake alot of ppl do, is turning of queue @ cgminer, and expiry/scantime way too low. noqueue/low scan+expiry was only needed on getwork, since everything is using stratum your work will be generated localy and your no longer affect that much by latency. its sad that alot of "guides" still say you should this stupid behaviour :S

This one Smiley
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 06:19:01 PM
Can you explain the second error that you were talking about in the previous message?

I'm not in a P2P pool right now
cgminer (old version that supports GPU mining) and configuration adapted to my hardware
what "second error", can you be more precise?
newbie
Activity: 36
Merit: 0
November 24, 2013, 06:14:42 PM
Can you explain the second error that you were talking about in the previous message?

I'm not in a P2P pool right now
cgminer (old version that supports GPU mining) and configuration adapted to my hardware
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 04:57:57 PM
Where did you say bandwidth? I know the difference between those two words but, being basically a french-speaker, if you don't name the word, I take the one I thinkyou're meaning

I usually have less than 100 ms Smiley

I don't understand the second error :/
what miner are you using?
what parameters/config?
whats the pingtime to the p2pool?
newbie
Activity: 36
Merit: 0
November 24, 2013, 04:28:00 PM
Where did you say bandwidth? I know the difference between those two words but, being basically a french-speaker, if you don't name the word, I take the one I thinkyou're meaning

I usually have less than 100 ms Smiley

I don't understand the second error :/
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 02:34:16 PM
ok , my point was - that the narken source works better for me after test.
and yes i agree with you about the DOA stuff - nicelly written
seems the guy with that much orphan has misconfigured their node (stuck *coind or changed the src/internals) or is doing some crazy shit. tough if you run your own node, you wont be affected by it. you will earn at his expenses Smiley
according to the graphs + data logs, he mined and then he stoped his node, did something crazy changes and now his p2pool is producing only (or almost only) orphans. funny stuff
if you look at the following, you will be happy with free coins
Code:
Shares: 6624 total (7 orphaned, 189 dead) Efficiency: 123.2%
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 02:33:05 PM
I think that I'm gonna wait for a traditional PPLNS pool without lags :/
if your connection is bad (someone had 30-40% stales yesterday) obviously p2pool or any pooled mining is bad (on p2pool its just alot worse).
you should run a own bbqcoin p2pool instance and see if its better.

I can get 5 MB/s while downloading with Bittorrent so I don't think that I have a bad connection
But i like having a monitor that shows all the stats
And obviously I like the PPLNS system :S
a mistake alot of ppl do, bandwidth != latency.
for p2pool/mining it comes down to latency. of course if your up/down-stream is fully (or highly) saturated, your latency will go up unless you do traffic shapping.
also another mistake alot of ppl do, is turning of queue @ cgminer, and expiry/scantime way too low. noqueue/low scan+expiry was only needed on getwork, since everything is using stratum your work will be generated localy and your no longer affect that much by latency. its sad that alot of "guides" still say you should this stupid behaviour :S
newbie
Activity: 36
Merit: 0
November 24, 2013, 02:25:45 PM
I think that I'm gonna wait for a traditional PPLNS pool without lags :/
if your connection is bad (someone had 30-40% stales yesterday) obviously p2pool or any pooled mining is bad (on p2pool its just alot worse).
you should run a own bbqcoin p2pool instance and see if its better.

I can get 5 MB/s while downloading with Bittorrent so I don't think that I have a bad connection
But i like having a monitor that shows all the stats
And obviously I like the PPLNS system :S
full member
Activity: 190
Merit: 100
November 24, 2013, 02:24:41 PM
ok , my point was - that the narken source works better for me after test.
and yes i agree with you about the DOA stuff - nicelly written
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 01:54:41 PM
But on the other pool (BigBBQ), it seems like they don't pay the shares (less than one BBQ in nearly a day) and, on "digBBQcoin", you can't register if yiou have a "-" in your email...

Stand by. K1773R is setting up a new p2pool server right now. Once its up we will will put up the info!
here we go
p2pool for mining: http://p2pool.bbqcoin.darkgamex.ch:19324/static/
if you want to run your own node: https://github.com/K1773R/p2pool-bqc

i tryed this p2pool source and its giving too much DOA.
if i use the narken source: https://bitcointalksearch.org/topic/annbqcp2pool-first-bbqcoin-p2pool-httpbbqcrabdancecom8900-198263 i have much better stats.
how is 3.4% doa+orphan much?

EDIT: as some more ppl join, it takes some minutes to increase sharediff resulting in more orphan/doa during that period. orphans arent a problem aslong you got around the same amount as others do. seems one guy has a horrible connection and therefore a lot of orphan. good part about this is the ppl who setup their p2pool right will have higher income than otherwise possible and the ones refusing to do it right will get less.
full member
Activity: 190
Merit: 100
November 24, 2013, 01:50:25 PM
But on the other pool (BigBBQ), it seems like they don't pay the shares (less than one BBQ in nearly a day) and, on "digBBQcoin", you can't register if yiou have a "-" in your email...

Stand by. K1773R is setting up a new p2pool server right now. Once its up we will will put up the info!
here we go
p2pool for mining: http://p2pool.bbqcoin.darkgamex.ch:19324/static/
if you want to run your own node: https://github.com/K1773R/p2pool-bqc

i tryed this p2pool source and its giving too much DOA.
if i use the narken source: https://bitcointalksearch.org/topic/annbqcp2pool-first-bbqcoin-p2pool-httpbbqcrabdancecom8900-198263 i have much better stats.

legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 11:01:45 AM
guy @ bLwPe1vVfQJ6YEVXJHZxPwRU1K2yDbmYfR:
as you have such little hashrate, i donated 10BQC to you Wink
tx: c63c6f4020b57f9ec98d4ad4570bd2b74e9e34a27792fbfaf33d14cd120cb853
legendary
Activity: 1792
Merit: 1008
/dev/null
November 24, 2013, 09:22:00 AM
I think that I'm gonna wait for a traditional PPLNS pool without lags :/
if your connection is bad (someone had 30-40% stales yesterday) obviously p2pool or any pooled mining is bad (on p2pool its just alot worse).
you should run a own bbqcoin p2pool instance and see if its better.
newbie
Activity: 36
Merit: 0
November 24, 2013, 07:08:20 AM
I think that I'm gonna wait for a traditional PPLNS pool without lags :/
full member
Activity: 179
Merit: 100
November 24, 2013, 06:57:54 AM
What is the advantage of a P2P pool?

I prefer when I can get some kind of a dashboard
This has a good description.
http://bitcoin.stackexchange.com/questions/3626/what-is-the-p2pool

Also there are stats its just different than a traditional pool.
http://p2pool.bbqcoin.darkgamex.ch:19324/static/graphs.html?Day
full member
Activity: 179
Merit: 100
November 24, 2013, 06:53:51 AM
what's the deal at the website.
click, "get client", it goes to some other website that has nothing to do with bbqcoin.

I started this up after a month or 2 of no mining and 1) if gives me a 'runaway exception' and I figured out it doesn't like my wallet, which has about 5000 coins in it. Although 5000 bbqcoins is nothing, really and literaly)

The number (wallet address)  is correct for a bbq wallet.
so who screwed the pooch?


the blockchain explorer shows my wallet to be correct, also, with the transactions in it.

I deleted the entire directory with the data in it, and it goes through the blockchain, but ehrn I put my wallet back, it bombs, with the "runaway exception" error.

so,. how do I recover them?
thanks


CaptChadd owns bbqcoin.org and he is done with BBQCoin use bbqcoinfoundation.org in the future or this sourceforge link.
http://sourceforge.net/projects/bbqcoin/

For your wallet. Did you backup your private key? Did you backup the wallet.dat file?
newbie
Activity: 36
Merit: 0
November 24, 2013, 04:57:32 AM
What is the advantage of a P2P pool?

I prefer when I can get some kind of a dashboard
full member
Activity: 179
Merit: 100
November 23, 2013, 02:53:00 PM
Working great. Hope some others can come join!
legendary
Activity: 1792
Merit: 1008
/dev/null
November 23, 2013, 02:25:40 PM
But on the other pool (BigBBQ), it seems like they don't pay the shares (less than one BBQ in nearly a day) and, on "digBBQcoin", you can't register if yiou have a "-" in your email...

Stand by. K1773R is setting up a new p2pool server right now. Once its up we will will put up the info!
here we go
p2pool for mining: http://p2pool.bbqcoin.darkgamex.ch:19324/static/
if you want to run your own node: https://github.com/K1773R/p2pool-bqc
Pages:
Jump to: