Topic: BFL Bank Wire Status - page 2. (Read 5536 times)

Dear BFL,

Can you please check and reply to e-mails regarding the wire transfer payments? I paid almost a week ago and still have heard nothing back from any at your company....

-Nbtcminer

Everyone wants to know the size of the first round . Could it be a continuous production though?

I purchased a MiniRig in May. I paid it on 23rd of May and I got the confirmation e-mail on 30th of May. The ETA for the delivery was between 23rd of Aug and 13th of Sept.

I signed for the Upgrade on 27th of Jun and i got the wire transfer instructions on 30th of Jun (saturday). I paid the requested amount on 4th of July. I beleive it will arrive to BFL at the end of this week or early next week.

My order number for the Mini Rig SC is 2360.

BFL,
could you please give us an estimate how many units will be shipped out at the first round?

How long does it usually take to confirm the wire transfer? I have never done a bank wire transfer before and just want to make sure everything went smooth. I sent 2 bank wire transfers the 28th and 29th, emailed BFL the info requested, but have not gotten a response with a confirmation that you guys got the money.

EDIT: I just got the wire confirm email from BFL today! It also included the date of purchase (date ordered + time it took to wire funds after receiving wire instructions from BFL). Now I can stop worrying knowing it is paid for and confirmed!

I sent a wire but added $30+ to cover anything at the other end. No confirmation still however.

Yes, I know that they're swamped with orders . Just posting for informing that we're all in same position. I've sent some extra, just in case the transfer gets charged on their side too.

Well it's actually their problem that they receive $20 less, if you pay the fee locally, then the receiving bank does not normally charge, and with FPGA orders this problem did not exist, only with ASIC, so they need to get in touch with their own bank and find out what's happening.

Thanks for the info. Good stuff. Shaking you for the extra $20 would have been awkward for them, epsecially if it cost you a loss in the que. But even if they did, I bet they would have saved your place in que considering the intent and amount you sent.

||bit

Sounds good.  And thanks for the feedback. Nice to know people are getting attended to within a week at most. Still waiting for a response here though - wire was sent 6/28 and received 6/29.
Let's see if they put me on a 'black list' for bringing this thread up. 

||bit

I received confirmation of my wire transfer from BFL on Tuesday 7/3 for the wire transfer that was made on Friday 6/29.

It looks like the wire transfer time didn't hurt my date of purchase.  The date of purchase in the confirmation email is still 6/24 (the date I placed the order).  So that's nice.

Edit:  Small correction, while my original date of purchase was 6/24 in my timezone, in BFL's timezone it was 6/23, so it looks like there is one day tacked on for the wire transfer (which is fair).

I am very happy with BFL -- I paid with wire tranfer and my Australian bank short changed BFL  by $20 ( a mix up on bank fees did not known $20 TT fee was not included on amount tranfered) they have accepted my payment as the full amount

below is the note from BFL

"Note: Our original invoice was in the amount of $2,686.00.  We received $2,666.00 via bank wire.  We will waive the difference for this order.
This is most likely due to bank transaction or wire fees.  Please be sure to account for any bank fees in future orders."


Thank you BFL
as it would have cost me $40 to fix the problem and lost time in the que

Luke

I'm giving them a benefit of the doubt, for now, since they have been faster in response on wire transfers before. This new product line is apparently overwhelming their capacity. So, it seems it is not neccessarily a complete lack of right intentions on their part. After asking BFL, I did get a brief email that the wire was received, and was told that customer service was still going to do a formal reply of receipt. So, all that to say you're not alone, since your delay issue appears to be the same as this and others. Putting a light on this existing delay for those that wired funds is one of the reasons for this thread. One question: Is it an unwarranted concern?

You can at least verify with your bank that your funds were received at the destination. And since this is apparently a common issue, consider giving them a full work week to respond before asking about a formal notice of funds received.

BTW: I'm not sure if you are oversea's or not, so keep in mind, tomorrow is the 4th of July holiday in the states. Often, companies give two work days off during this week. BFL shouldn't be any different.

||bit

At least they're getting somewhere. My payment was wired now almost a week ago. The problem with this silence is if something gone wrong, they will find it out only when they get to your order. With wire transfers its not a good idea to have a few weeks of response time...

Yeah, fair enough. I realize they are probably being inundated with orders while understaffed as well. As ice_chill recommended and others are doing, I suppose sitting and being more patient is the going thing. BFL has whipped us into submission  

BTW: Regarding the fpga mini-rig, if things go as they were shooting for, you should see it in a week. It seems like it was the logical thing to do to keep the order and not refund it. Good luck.

||bit

Thanks.

I just received final confirmation on my order after wiring the funds 6/28. They also confirmed the effective date of my purchase. Given how busy they are, I'm pleased with how they handled my order.   

Their response is erratic, i think it depends on who mans the Inbox for the Office email. I had to wait a week before they acknowledged my payment for my Mini-Rig order. All i received was that my order was in. Not sure why it took them a week to respond. This was way back in April-May.

-byte1

Seems like the same story. Just a note, a few months ago my wire was received same day at BFL, and they acknowledged that afternoon or evening. So, they have the potential to repond promptly. But that order was not at the start of the FPGA produt life, so it might not have been as busy at BFL. Being that this is the beginning of the asic hardware it makes some sense to have delays knowing their staffing must be low. Anyway, they communicated to me that it was being resolved...but no timeline was mentioned.

||bit

First of all, your analysis is faulty, because I'm not thinking that I'm more special than anyone here. There isn't even good reasoning to warrant that claim of yours. If you think others aren't wondering with some concern about their sent funds, or products, then you are mistaken. Sharing our experiences here about our dealings with BFL can help us to know what is happening (afterall, customer service is still not ready to handle it). And I have waited patiently, up to a point. Perhaps, it was the point where BFL was late to meet their shipping terms by weeks already without even a notice. This simply heightened my concern. Of course, you or others may be more patient with that. Whcih is good, as it's less to think about. But perhaps the difference is that I have been burned before (more than once). Companies appearing just as nice as BFL. Except, those companies actually answered the phone when you called. Anyway, despite some decent feelings about them (derived from the forums), BFL is about as close to an unkown company as you can get. Who are they? So, why not become more alert than normally when they do meet order terms.

That said, I have 'calmed' down a bit, for now, after a question with a long term forum contributor.

Anyway, this was a survey at the start. And the survey asked if others experienced any delays in receipts, and importantly if they thought those delays were reasonable. If you have any real contributions to add, then please do. And if you really think someone should be more patient, then find a better way to say it than telling them to shut up. Afterall, nobody is asking you to read this thread.

||bit