BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 204.

Sakic

newbie

Activity: 56

Merit: 0

Quote from: dave_bbp on March 03, 2019, 03:43:25 PM

Quote from: bible_pay on March 03, 2019, 03:32:59 PM

Please try forcing a podcupdate 'exec podcupdate true' then check your rac.
This is existing behavior - this is that if you miss a podcupdate (yours looks missing for 24 hrs) it queries 0 rac from wcg until you send a new podcupdate.

Yes I know, but the last output I posted is actually the answer for the forced PODC update (tried that several times):

Code:

21:42:21

exec podcupdate true

21:42:21

{
"Command": "podcupdate",
"PODCUpdate": "Processed (1) over 0 CPID(s) successfully."
}

this exactly happened to me today. I had to reasociate wallet with CPID again.

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: bible_pay on March 03, 2019, 03:32:59 PM

Please try forcing a podcupdate 'exec podcupdate true' then check your rac.
This is existing behavior - this is that if you miss a podcupdate (yours looks missing for 24 hrs) it queries 0 rac from wcg until you send a new podcupdate.

Yes I know, but the last output I posted is actually the answer for the forced PODC update (tried that several times):

Code:

21:42:21

exec podcupdate true

21:42:21

{
"Command": "podcupdate",
"PODCUpdate": "Processed (1) over 0 CPID(s) successfully."
}

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: dave_bbp on March 03, 2019, 02:05:11 PM

Quote from: bible_pay on March 02, 2019, 06:38:04 PM

BiblePay
1.1.9.7 - Leisure Upgrade

- Slow down POG leaderboard UI refresh
- Speed up boot time
- Fix bug where PODC update is unable to find destination address
- Fix mining crash in windows 10

Could someone please tell us if this fixes the crash in windows 10. Also, we had complaints of someone trying to do 'exec podcupdate' and receiving "Invalid Destination Address". This fixes that problem.

Also: This wallet fixes the problem where a person is unable to run 'exec podcupdate true' because the transaction is rejected. Please try again in this version.

I realized that I missed PODC payment yesterday because my wallet got confused with POG and PODC and somehow touched my PODC pile so that my specified utxoamount wasn't met anymore. Today in the morning I tried to send PODCupdate true, but got the "invalid destination address" error. I didn't have time then to do anything about it.

Now I read that you already fixed this error. However for me it seems to have caused an even "worse" situation: my wallet (1198) doesn't even read out my RAC anymore. This is how it looks like:

Code:

"Command": "getboincinfo",
"CPID": "7c9264559fef3c1c689ee9fc3ff42494",
"Address": "BNetxsZfjyNfW73Kvsh5AYLHENpEHcR3qh",
"CPIDS": "7c9264559fef3c1c689ee9fc3ff42494;",
"CPID-Age (hours)": 431011,
"NextSuperblockHeight": 104970,
"NextSuperblockBudget": 998673,
"Total_RAC": 0,
"Total Payments (One Day)": 0,
"Total Payments (One Week)": 61522,
"Total Budget (One Day)": 998673,
"Total Budget (One Week)": 7066751,
"Superblock Count (One Week)": 8,
"Superblock Hit Count (One Week)": 8,
"Superblock List": "104765,104560,104355,104150,103945,103740,103535,103330",
"Last Superblock Height": 104765,
"Last Superblock Budget": 998673,
"Last Superblock Payment": 0,
"Magnitude (One-Day)": 0,
"Magnitude (One-Week)": 8.705839501066333

Code:

"Command": "totalrac",
"Total RAC": 0,
"UTXO Target": 10,
"StakeBalance": 2586156,
"Threshhold to receive 10% rewards (below this UTXO Amount rewards are lost)": 10,
"Stake Level Required For 10% Level": 10,
"Stake Level Required For 20% Level": 10,
"Stake Level Required For 30% Level": 10,
"Stake Level Required For 40% Level": 10,
"Stake Level Required For 50% Level": 10,
"Stake Level Required For 60% Level": 10,
"Stake Level Required For 70% Level": 10,
"Stake Level Required For 80% Level": 10,
"Stake Level Required For 90% Level": 10,
"Stake Level Required For 100% Level": 10,
"Total Team RAC": 5793726

Code:

"Command": "podcupdate",
"PODCUpdate": "Processed (1) over 0 CPID(s) successfully."

Any ideas? Right now it looks like I'm gonna miss out the second PODC payment in 3 days. Sad

Please try forcing a podcupdate 'exec podcupdate true' then check your rac.
This is existing behavior - this is that if you miss a podcupdate (yours looks missing for 24 hrs) it queries 0 rac from wcg until you send a new podcupdate.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: CoinCowgirl on March 03, 2019, 02:25:16 PM

Is this approved and transparant? Can people see, if they want, on black and white where the money is goining to?

Yes, see accountability.biblepay.org.

CoinCowgirl

member

Activity: 277

Merit: 10

Is this approved and transparant? Can people see, if they want, on black and white where the money is goining to?

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: bible_pay on March 02, 2019, 06:38:04 PM

BiblePay
1.1.9.7 - Leisure Upgrade

- Slow down POG leaderboard UI refresh
- Speed up boot time
- Fix bug where PODC update is unable to find destination address
- Fix mining crash in windows 10

Could someone please tell us if this fixes the crash in windows 10. Also, we had complaints of someone trying to do 'exec podcupdate' and receiving "Invalid Destination Address". This fixes that problem.

Also: This wallet fixes the problem where a person is unable to run 'exec podcupdate true' because the transaction is rejected. Please try again in this version.

I realized that I missed PODC payment yesterday because my wallet got confused with POG and PODC and somehow touched my PODC pile so that my specified utxoamount wasn't met anymore. Today in the morning I tried to send PODCupdate true, but got the "invalid destination address" error. I didn't have time then to do anything about it.

Now I read that you already fixed this error. However for me it seems to have caused an even "worse" situation: my wallet (1198) doesn't even read out my RAC anymore. This is how it looks like:

Code:

"Command": "getboincinfo",
"CPID": "7c9264559fef3c1c689ee9fc3ff42494",
"Address": "BNetxsZfjyNfW73Kvsh5AYLHENpEHcR3qh",
"CPIDS": "7c9264559fef3c1c689ee9fc3ff42494;",
"CPID-Age (hours)": 431011,
"NextSuperblockHeight": 104970,
"NextSuperblockBudget": 998673,
"Total_RAC": 0,
"Total Payments (One Day)": 0,
"Total Payments (One Week)": 61522,
"Total Budget (One Day)": 998673,
"Total Budget (One Week)": 7066751,
"Superblock Count (One Week)": 8,
"Superblock Hit Count (One Week)": 8,
"Superblock List": "104765,104560,104355,104150,103945,103740,103535,103330",
"Last Superblock Height": 104765,
"Last Superblock Budget": 998673,
"Last Superblock Payment": 0,
"Magnitude (One-Day)": 0,
"Magnitude (One-Week)": 8.705839501066333

Code:

"Command": "totalrac",
"Total RAC": 0,
"UTXO Target": 10,
"StakeBalance": 2586156,
"Threshhold to receive 10% rewards (below this UTXO Amount rewards are lost)": 10,
"Stake Level Required For 10% Level": 10,
"Stake Level Required For 20% Level": 10,
"Stake Level Required For 30% Level": 10,
"Stake Level Required For 40% Level": 10,
"Stake Level Required For 50% Level": 10,
"Stake Level Required For 60% Level": 10,
"Stake Level Required For 70% Level": 10,
"Stake Level Required For 80% Level": 10,
"Stake Level Required For 90% Level": 10,
"Stake Level Required For 100% Level": 10,
"Total Team RAC": 5793726

Code:

"Command": "podcupdate",
"PODCUpdate": "Processed (1) over 0 CPID(s) successfully."

Any ideas? Right now it looks like I'm gonna miss out the second PODC payment in 3 days. Sad

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

We had 9 letters written this period, these have been sent.

Note: We need about 78 more letters written over the next 60 days, if anyone will help. Reward is above 8,500 BBP now.

* On a side note, the bbp price scale has been expanded in the pool so now the subway gift card is more accurately priced (The last high price was due to not having enough zeroes in our price on the home page - fixed).

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

BiblePay
1.1.9.8 - Leisure Upgrade

- Honor the pogbuffer setting preventing auto-tithe from constantly
working (this bug affected auto-tithe and the rpc tithe)

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

BiblePay
1.1.9.7 - Leisure Upgrade

- Slow down POG leaderboard UI refresh
- Speed up boot time
- Fix bug where PODC update is unable to find destination address
- Fix mining crash in windows 10

Could someone please tell us if this fixes the crash in windows 10. Also, we had complaints of someone trying to do 'exec podcupdate' and receiving "Invalid Destination Address". This fixes that problem.

Also: This wallet fixes the problem where a person is unable to run 'exec podcupdate true' because the transaction is rejected. Please try again in this version.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: Sakic on March 02, 2019, 05:38:03 PM

regarding auto tithe, it looks here is problem. Why does wallet choose wrong coin roll? I have a lot of rolls with coin age >2.415 and amount > 859
An this happens every 5 minutes in debug.log(tithe=5)

BiblePayMiner::Choosing to tithe with coin age 2.300208 and coin amount 4989.001000 with a total tithe amount of 9.660000 with current pog difficulty of 2250.069728 with buffered tithe amount of 9.177000. CreateTransaction::Requiring specific coin age 2.415000 and coin amount 859
BiblePayMiner::SendTithe::Error - Unable to send tithe - Amount 9.660000, Error Unable to Create Transaction: Unable to locate coins older than minimum_tithe_coin_age. ResendWalletTransactions: rebroadcast 2 unconfirmed transactions

Wait, let me check.

Sakic

newbie

Activity: 56

Merit: 0

regarding auto tithe, it looks here is problem. Why does wallet choose wrong coin roll? I have a lot of rolls with coin age >2.415 and amount > 859
An this happens every 5 minutes in debug.log(tithe=5)

BiblePayMiner::Choosing to tithe with coin age 2.300208 and coin amount 4989.001000 with a total tithe amount of 9.660000 with current pog difficulty of 2250.069728 with buffered tithe amount of 9.177000. CreateTransaction::Requiring specific coin age 2.415000 and coin amount 859
BiblePayMiner::SendTithe::Error - Unable to send tithe - Amount 9.660000, Error Unable to Create Transaction: Unable to locate coins older than minimum_tithe_coin_age. ResendWalletTransactions: rebroadcast 2 unconfirmed transactions

Sakic

newbie

Activity: 56

Merit: 0

Quote from: bible_pay on March 02, 2019, 04:47:28 PM

Quote from: Sakic on March 02, 2019, 04:35:39 PM

Quote from: dave_bbp on March 01, 2019, 12:21:39 PM

Quote from: harrisvan87 on March 01, 2019, 05:21:58 AM

After update to 1.1.9.6 all my titheable coin disappear

. i mean my coin still in wallet but no able to tithe. coinage ..etc..gone...WTH i can't understand..

It seems I have kind of the opposite problem. Cheesy

Since updating to 1195 or 1196 (not sure which, I'm currently on 1196) my wallet does not tithe as often as it can. I have set "tithe=10" and my POG Engine Room is full of tithable coins, but the wallet only tithes 3 times (every 10 minutes), then waits for approx. 3-4 hours, then again tithes 2 or 3 times and so on ...

Any ideas?

I have same problem. After updating to 1196 my wallet doesnt send automatic tithes regularly, although I have coins with requested coin age and amount. I tried to change tithe= parameter, but its same.

Second issue I dont like - if my wallet finally sends some tithes - they often ends as illegal.

When I tithe manually sometimes I get this error:

tithe 9
{
"Error": "Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here."
}

Yeah, thats not 1196, thats a tithe problem.

Try restarting with -zapwallettxes=1 and manually tithe and let us know if it fixed it?

It didnt help, same error when manually tithed. Transaction ends as offline.
Wallet still doesnt send automatic tithes too.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: Sakic on March 02, 2019, 04:35:39 PM

Quote from: dave_bbp on March 01, 2019, 12:21:39 PM

Quote from: harrisvan87 on March 01, 2019, 05:21:58 AM

After update to 1.1.9.6 all my titheable coin disappear

. i mean my coin still in wallet but no able to tithe. coinage ..etc..gone...WTH i can't understand..

It seems I have kind of the opposite problem. Cheesy

Since updating to 1195 or 1196 (not sure which, I'm currently on 1196) my wallet does not tithe as often as it can. I have set "tithe=10" and my POG Engine Room is full of tithable coins, but the wallet only tithes 3 times (every 10 minutes), then waits for approx. 3-4 hours, then again tithes 2 or 3 times and so on ...

Any ideas?

I have same problem. After updating to 1196 my wallet doesnt send automatic tithes regularly, although I have coins with requested coin age and amount. I tried to change tithe= parameter, but its same.

Second issue I dont like - if my wallet finally sends some tithes - they often ends as illegal.

When I tithe manually sometimes I get this error:

tithe 9
{
"Error": "Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here."
}

Yeah, thats not 1196, thats a tithe problem.

Try restarting with -zapwallettxes=1 and manually tithe and let us know if it fixed it?

Sakic

newbie

Activity: 56

Merit: 0

Quote from: dave_bbp on March 01, 2019, 12:21:39 PM

Quote from: harrisvan87 on March 01, 2019, 05:21:58 AM

After update to 1.1.9.6 all my titheable coin disappear

. i mean my coin still in wallet but no able to tithe. coinage ..etc..gone...WTH i can't understand..

It seems I have kind of the opposite problem. Cheesy

Since updating to 1195 or 1196 (not sure which, I'm currently on 1196) my wallet does not tithe as often as it can. I have set "tithe=10" and my POG Engine Room is full of tithable coins, but the wallet only tithes 3 times (every 10 minutes), then waits for approx. 3-4 hours, then again tithes 2 or 3 times and so on ...

Any ideas?

I have same problem. After updating to 1196 my wallet doesnt send automatic tithes regularly, although I have coins with requested coin age and amount. I tried to change tithe= parameter, but its same.

Second issue I dont like - if my wallet finally sends some tithes - they often ends as illegal.

When I tithe manually sometimes I get this error:

tithe 9
{
"Error": "Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here."
}

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: sunk818 on March 02, 2019, 12:01:36 PM

Quote from: bible_pay on March 02, 2019, 11:18:15 AM

Quote from: sunk818 on March 02, 2019, 10:47:05 AM

Yes, I find those kind of errors too, but they are quite rare. Maybe the wallet waits for a prolonged time after this?
I also tested faster manual tithing right now, and I could practically tithe successfully every 4 or 5 seconds.
Well I'll just leave the wallet running with tithe=5 over night.

Thanks for your help!
Anyway, I

The one I use for PoDC and 5% solo mining (Windows 10) does not crash. on my mac and Windows 10 it keeps crashing on me daily. and I'm getting reports from some Linux masternode holders 1196 crashing on them. exec mypogaudit is a useful feature, but I'm not sure if it is worth risking your wallet crashing if you use PoG.

Well its pretty obvious to me we didnt have mac and windows 10 crashes up til the last release otherwise I would have seen at least one github issue.

I see you just entered one now.

Thanks, we'll look at it. So basically this is a brand new mining issue with pog in windows 10 and mac.

Svk Niko said his crashed too on windows but was on 1191.

So far other versions that been reliable for me.

Debugging most probable cause now..

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: sunk818 on March 02, 2019, 12:05:43 PM

If tithe is in mempool can txt be rejected because min coin age or min coin value doesn't meet current requirements? As a test I tithes 75x and hit the mempool limit. I don't think all made it in. The ones on next block were illegal because min coin age changed.

I know you want to reject before tx is made but sometimes mempool tx may be illegal after the fact.

I may be misunderstanding something here but that's my assessment.

Yes, tithe will gracefully be rejected out of the memory pool, and tx will fail immediately if it doesn't meet diff requirements, if someone fraudulently modifies the client and forces it in and the client misses the local check, however, only 62% have upgraded, so right now we have a 62% chance of that working every time (for an end user running a fraudulent version).

So this is why I don't want to discuss that particular thing to a great-great degree if its not entirely in prod yet, but, I do want to discuss any prod support issue until the pog works 100% correctly.

I don't see a problem in this case.

sunk818

full member

Activity: 1176

Merit: 111

If tithe is in mempool can txt be rejected because min coin age or min coin value doesn't meet current requirements? As a test I tithes 75x and hit the mempool limit. I don't think all made it in. The ones on next block were illegal because min coin age changed.

I know you want to reject before tx is made but sometimes mempool tx may be illegal after the fact.

I may be misunderstanding something here but that's my assessment.

sunk818

full member

Activity: 1176

Merit: 111

Quote from: bible_pay on March 02, 2019, 11:18:15 AM

Quote from: sunk818 on March 02, 2019, 10:47:05 AM

Yes, I find those kind of errors too, but they are quite rare. Maybe the wallet waits for a prolonged time after this?
I also tested faster manual tithing right now, and I could practically tithe successfully every 4 or 5 seconds.
Well I'll just leave the wallet running with tithe=5 over night.

Thanks for your help!
Anyway, I

The one I use for PoDC and 5% solo mining (Windows 10) does not crash. on my mac and Windows 10 it keeps crashing on me daily. and I'm getting reports from some Linux masternode holders 1196 crashing on them. exec mypogaudit is a useful feature, but I'm not sure if it is worth risking your wallet crashing if you use PoG.

Well its pretty obvious to me we didnt have mac and windows 10 crashes up til the last release otherwise I would have seen at least one github issue.

I see you just entered one now.

Thanks, we'll look at it. So basically this is a brand new mining issue with pog in windows 10 and mac.

Svk Niko said his crashed too on windows but was on 1191.

So far other versions that been reliable for me.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: sunk818 on March 02, 2019, 10:47:05 AM

Yes, I find those kind of errors too, but they are quite rare. Maybe the wallet waits for a prolonged time after this?
I also tested faster manual tithing right now, and I could practically tithe successfully every 4 or 5 seconds.
Well I'll just leave the wallet running with tithe=5 over night.

Thanks for your help!
Anyway, I

The one I use for PoDC and 5% solo mining (Windows 10) does not crash. on my mac and Windows 10 it keeps crashing on me daily. and I'm getting reports from some Linux masternode holders 1196 crashing on them. exec mypogaudit is a useful feature, but I'm not sure if it is worth risking your wallet crashing if you use PoG.

Well its pretty obvious to me we didnt have mac and windows 10 crashes up til the last release otherwise I would have seen at least one github issue.

I see you just entered one now.

Thanks, we'll look at it. So basically this is a brand new mining issue with pog in windows 10 and mac.

sunk818

full member

Activity: 1176

Merit: 111

Quote

Yes, I find those kind of errors too, but they are quite rare. Maybe the wallet waits for a prolonged time after this?
I also tested faster manual tithing right now, and I could practically tithe successfully every 4 or 5 seconds.
Well I'll just leave the wallet running with tithe=5 over night.

Thanks for your help!
Anyway, I

The one I use for PoDC and 5% solo mining (Windows 10) does not crash. on my mac and Windows 10 it keeps crashing on me daily. and I'm getting reports from some Linux masternode holders 1196 crashing on them. exec mypogaudit is a useful feature, but I'm not sure if it is worth risking your wallet crashing if you use PoG.

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 204. (Read 243417 times)