BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 475.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: inblue on May 14, 2018, 01:16:29 PM

Does anyone have any idea how to protect the wallet with 2FA or multi-factor authentication, not necessarily like Google Authenticator, but like a multisig wallet in Bitcoin? I would do 2-of-2, so that for sending BBP I need a second key with which I can sign a tx on an offline computer and then return it to the online computer to broadcast it.

I did it once in biblepay and it worked, not sure if this is what you want, but basically you would want to create a multisig address (I think they begin with a 7 in our wallet), and pick 2 of 2, then you send a certain amount to that address, and its locked unless both of the new private keys sign a transaction away from it.

Im sure you can find rpc examples to get it working:
https://en.bitcoin.it/wiki/Multisignature

Note that this is obvious, but I would send 100 bbp there and fully test (withdrawing it) a few times before committing a lot of bbp to the address.

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: SVK Noko on May 13, 2018, 11:44:30 PM

Quote from: SVK Noko on May 13, 2018, 12:57:27 PM

Quote from: dave_bbp on May 13, 2018, 12:52:11 PM

Quote from: SVK Noko on May 13, 2018, 12:37:20 PM

My VPS with my running win wallet had maintenance yesterday. Before that I switched off the wallet. Today after maintenance was finished I started wallet again. What a surprise, I see again 0 active peers connection :-) :-) once again. After resync same, after deleting all appropriate files and restart and resync same.

Result: I dont have a words for this... again.

Sounds to me like a network/firewall issue rather than an issue of the wallet. I have several wallets (Win 7, Win 10, Ubuntu etc.) running and I regularly close and restart them and never had any problem with not finding peers.
The only time I experienced this exact same problem was when I had my laptop in a university network. There the wallet couldn't establish any peer connection.

P.S.: I don't have any "addnode=" lines whatsoever in my configs...

Thanks for answer dave. I was thinking about some firewall issue. I switched the firewall off completely but with the same result. I dont expect that VPS service provider blocked some network ports or something like that during maintenance.

dave_bbp sometimes it's better just sleep a little bit :-) today morning (Central Europe) is everything running ok without problem.

Haha, nice to hear that. Reminds me of Psalm 127:2. Cheesy

sunk818

full member

Activity: 1176

Merit: 111

Quote from: thesnat21 on May 14, 2018, 02:23:55 PM

Quote from: inblue on May 14, 2018, 01:16:29 PM

Does anyone have any idea how to protect the wallet with 2FA or multi-factor authentication, not necessarily like Google Authenticator, but like a multisig wallet in Bitcoin? I would do 2-of-2, so that for sending BBP I need a second key with which I can sign a tx on an offline computer and then return it to the online computer to broadcast it.

I imagine it would take some work... Currently the PODC unlock unlocks it for sending funds as well ..

Multi-sig part I don't know about it. I know QTUM and HTMLCOIN both have unlock for staking only checkbox when you "decrypt" the wallet with your password. Maybe the code can be reused. Both are open source.

https://github.com/HTMLCOIN/HTMLCOIN/blob/master/src/wallet/rpcdump.cpp

I'm not a dev, so I don't understand what's involved, but perhaps the code is already there and it is matter of merging into existing BBP codebase.

thesnat21

jr. member

Activity: 490

Merit: 4

Quote from: inblue on May 14, 2018, 01:16:29 PM

Does anyone have any idea how to protect the wallet with 2FA or multi-factor authentication, not necessarily like Google Authenticator, but like a multisig wallet in Bitcoin? I would do 2-of-2, so that for sending BBP I need a second key with which I can sign a tx on an offline computer and then return it to the online computer to broadcast it.

I imagine it would take some work... Currently the PODC unlock unlocks it for sending funds as well ..

inblue

full member

Activity: 462

Merit: 103

Does anyone have any idea how to protect the wallet with 2FA or multi-factor authentication, not necessarily like Google Authenticator, but like a multisig wallet in Bitcoin? I would do 2-of-2, so that for sending BBP I need a second key with which I can sign a tx on an offline computer and then return it to the online computer to broadcast it.

noxpost

jr. member

Activity: 235

Merit: 3

Quote from: thesnat21 on May 14, 2018, 09:14:50 AM

Seems like someone is doing this only during weekdays oddly..

Difficulty shot back up to 25k+ on POBH mining, it seems to settle/drop over the weekend though

That feels a little suspicious. Just glad I'm not the employer of whoever's responsible

thesnat21

jr. member

Activity: 490

Merit: 4

Quote from: capulo on May 14, 2018, 07:38:18 AM

72 core platinum xeons from amazon

your performance will goes up like rocket

, but also bills Cheesy

Seems like someone is doing this only during weekdays oddly..

Difficulty shot back up to 25k+ on POBH mining, it seems to settle/drop over the weekend though

capulo

newbie

Activity: 491

Merit: 0

72 core platinum xeons from amazon

your performance will goes up like rocket

, but also bills Cheesy

lalexcross

newbie

Activity: 42

Merit: 0

Hey gents back again..

What kind of CPU does you think is the best CPU for mining BBP ?
Right now I'm using a couple of xeon 8 and 12 core...

Just to understand what i can buy to increase the performance

Cheers
Ale Grin

PhaseshiftUK

full member

Activity: 345

Merit: 100

Quote from: thesnat21 on May 13, 2018, 05:47:49 PM

Quote from: Cloudpost on May 13, 2018, 12:48:48 PM

I have a .dat wallet with some coins in it that I used with very old wallet version. I tried it with new wallets and it results in a crash. Can someone please advice how to resolve this issue? Try to export priv keys using the old version wallet? I ask because maybe there are ppl who solved such issues succesfully and that can share a solution.

Do you know what version?

I would say incremental upgrades until you get to the current one.

Have you tried "Tools" -> "Wallet Repair", then press "Upgrade Wallet Format"? Or are you not even able to get that far?

PhaseshiftUK

full member

Activity: 345

Merit: 100

Quote from: SVK Noko on May 13, 2018, 11:44:30 PM

Quote from: SVK Noko on May 13, 2018, 12:57:27 PM

Quote from: dave_bbp on May 13, 2018, 12:52:11 PM

Quote from: SVK Noko on May 13, 2018, 12:37:20 PM

My VPS with my running win wallet had maintenance yesterday. Before that I switched off the wallet. Today after maintenance was finished I started wallet again. What a surprise, I see again 0 active peers connection :-) :-) once again. After resync same, after deleting all appropriate files and restart and resync same.

Result: I dont have a words for this... again.

Sounds to me like a network/firewall issue rather than an issue of the wallet. I have several wallets (Win 7, Win 10, Ubuntu etc.) running and I regularly close and restart them and never had any problem with not finding peers.
The only time I experienced this exact same problem was when I had my laptop in a university network. There the wallet couldn't establish any peer connection.

P.S.: I don't have any "addnode=" lines whatsoever in my configs...

Thanks for answer dave. I was thinking about some firewall issue. I switched the firewall off completely but with the same result. I dont expect that VPS service provider blocked some network ports or something like that during maintenance.

dave_bbp sometimes it's better just sleep a little bit :-) today morning (Central Europe) is everything running ok without problem.

If I have issues with a wallet not finding any peers, I tend to find that stopping/closing it, deleting peers.dat and banlist.dat can help. If that still fails, I check the wallet version and for any recommended "addnode" entries to add after once again deleting peers.dat and banlist.dat.

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: SVK Noko on May 13, 2018, 12:57:27 PM

Quote from: dave_bbp on May 13, 2018, 12:52:11 PM

Quote from: SVK Noko on May 13, 2018, 12:37:20 PM

My VPS with my running win wallet had maintenance yesterday. Before that I switched off the wallet. Today after maintenance was finished I started wallet again. What a surprise, I see again 0 active peers connection :-) :-) once again. After resync same, after deleting all appropriate files and restart and resync same.

Result: I dont have a words for this... again.

Sounds to me like a network/firewall issue rather than an issue of the wallet. I have several wallets (Win 7, Win 10, Ubuntu etc.) running and I regularly close and restart them and never had any problem with not finding peers.
The only time I experienced this exact same problem was when I had my laptop in a university network. There the wallet couldn't establish any peer connection.

P.S.: I don't have any "addnode=" lines whatsoever in my configs...

Thanks for answer dave. I was thinking about some firewall issue. I switched the firewall off completely but with the same result. I dont expect that VPS service provider blocked some network ports or something like that during maintenance.

dave_bbp sometimes it's better just sleep a little bit :-) today morning (Central Europe) is everything running ok without problem.

thesnat21

jr. member

Activity: 490

Merit: 4

Quote from: ?? on ??

I didnt see any apology yet over here when Slovakia made up a tall tale that I stole the orphan funds the second month we existed- and then I proved that I am not the thief here; however, on the electric comment: it was a public comment on discord that Slovakia mines with stolen electricity.

Here's something for you to read - does this look like it comes from Satan? :
https://wiki.biblepay.org/Become_Zealous_for_Christ

Btw, your comments are mean spirited.

When grudges are held, only the ones holding the grudges will suffer. I learned this a few years back.

Any attack on someones character shouldn't be done. or at least shouldn't be done in a public forum, you reminded me of that..

This thread is peppered with an abomination of thought and discord. It needs to stop from all sides.

As I tried to say last month ...

Let's let the rule of this thread, and this project be : Only post things that the orphan's should be able to read and learn from.

thesnat21

jr. member

Activity: 490

Merit: 4

Quote from: Cloudpost on May 13, 2018, 12:48:48 PM

I have a .dat wallet with some coins in it that I used with very old wallet version. I tried it with new wallets and it results in a crash. Can someone please advice how to resolve this issue? Try to export priv keys using the old version wallet? I ask because maybe there are ppl who solved such issues succesfully and that can share a solution.

Do you know what version?

I would say incremental upgrades until you get to the current one.

capulo

newbie

Activity: 491

Merit: 0

already did, but have no answer Sad

MIP

newbie

Activity: 362

Merit: 0

Quote from: capulo on May 13, 2018, 04:19:54 PM

is pool only option to put proposals? if so, how could i credit my pool account?

Send PM to Rob mentioning your nick there

capulo

newbie

Activity: 491

Merit: 0

is pool only option to put proposals? if so, how could i credit my pool account?

Cloudpost

hero member

Activity: 742

Merit: 500

Quote from: inblue on May 13, 2018, 03:06:28 PM

Quote from: Cloudpost on May 13, 2018, 12:48:48 PM

I have a .dat wallet with some coins in it that I used with very old wallet version. I tried it with new wallets and it results in a crash. Can someone please advice how to resolve this issue? Try to export priv keys using the old version wallet? I ask because maybe there are ppl who solved such issues succesfully and that can share a solution.

Are there any hints in the debug.log file? Did you try opening the wallet in Linux?

I would also try compiling an old wallet version from GitHub, try to open the wallet again and if it works, make a new wallet.dat backup from it and then try the newly created wallet.dat file in the latest wallet.

Thanks for your help. Not a linux user, will check the log and few things to solve the issue and report here, maybe such information will be useful. Very glad to see very fast helpful responses in the thread

inblue

full member

Activity: 462

Merit: 103

Quote from: bible_pay on May 12, 2018, 06:51:54 AM

"OUT_TX (05-12-2018 07:09:54) (05-12-2018 07:09:54)": "You have 70% UTXO. Did you consider using less CPUs for PoDC and use some for PoBH or even another altcoin? Seems a pity RAC is only getting you to 70% reward of your staked coin."

Whoever put this prayer in should be ashamed of themselves. This platform is for prayers not for serving Mammon.

If we have another case of abuse we will need to lock it down.

Idea: sanctuaries voting for prayers being appropriate (yes/no) before they are shown in the wallet.

inblue

full member

Activity: 462

Merit: 103

Quote from: Cloudpost on May 13, 2018, 12:48:48 PM

I have a .dat wallet with some coins in it that I used with very old wallet version. I tried it with new wallets and it results in a crash. Can someone please advice how to resolve this issue? Try to export priv keys using the old version wallet? I ask because maybe there are ppl who solved such issues succesfully and that can share a solution.

Are there any hints in the debug.log file? Did you try opening the wallet in Linux?

I would also try compiling an old wallet version from GitHub, try to open the wallet again and if it works, make a new wallet.dat backup from it and then try the newly created wallet.dat file in the latest wallet.

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 475. (Read 243386 times)