Pages:
Author

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 54. (Read 243376 times)

full member
Activity: 1176
Merit: 111
Bisq
I've heard a bunch, I've researched some but haven't tried it
I posted more details here:

Are they the one that have the dogecoin rule? You need bigger marketcap and/or volume to be listed?
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
I'm attempting to withdraw some coins out of Tokok for the first time (about $200 worth),
They are stuck in "Pending approval" status the past ~30 minutes

"Notice
- Only after the withdrawal request pass the system audit will it be made successfully
- Withdrawal of some currencies requires manual review. Review Time: 9:30-02:00 (UTC+8)"

https://www.reddit.com/r/Nash/comments/c0rpql/anyone_ever_have_delays_withdrawing_from_tokok/

I will report back how it goes, looks like they'll be doing manually reviewing in an hour

UPDATE: An hour and a half after I posted this, All my withdrawals were approved, got emailed approval for each one

I was able to withdraw from Tokok on Monday Dec 2nd (3 days ago),
I think they operate in China timezone, so its about 2:22am for them right now

So just to get back up to speed on this, now that Cryptobridge is out of business, are there any decentralized exchanges that are healthy that we can apply for?
Do they even really exist?

I did hear back from Delion, they are supposedly trying to replace cryptobridge and they will allow us in for free:
https://delion.online/#usecases

I will reply to them, and graviex and stex this month.
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
Could someone please give us an update on Tokok, if they are working yet?

I find it very unsettling to not receive a reply from them in 24 hours.

Let me know and tomorrow if we have not heard back, lets talk about forming a grievance.





Have not heard from them either and no deposits have gone through at this point in time

Same here. Support chat says that "all agents are busy" when they were available in few minutes some weeks ago

Ok thanks guys.

Well this is pretty serious for them not to reply to us (with no mandatory upgrades yet) and a 2btc investment.

Checking my inbox, nothing yet.

Ill send them a new high priority email now.

So we have two people here that cant even withdraw the BBP, correct?

Togo and JSheets?



I have deposits in flight to them. Been that way for 6 days. The wallet is not taking them in

Ok, thanks, I have notified them, and, I will test one now on Tokok.

full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
** Upgrade Sanctuaries to Deterministic Mode **


For anyone who missed it, we must upgrade our sanctuaries to deterministic mode early:
https://www.reddit.com/r/BiblePay/comments/clyxyc/upgrading_masternodes_sanctuaries_to/


Thank you.



newbie
Activity: 60
Merit: 0
Could someone please give us an update on Tokok, if they are working yet?

I find it very unsettling to not receive a reply from them in 24 hours.

Let me know and tomorrow if we have not heard back, lets talk about forming a grievance.





Have not heard from them either and no deposits have gone through at this point in time

Same here. Support chat says that "all agents are busy" when they were available in few minutes some weeks ago

Ok thanks guys.

Well this is pretty serious for them not to reply to us (with no mandatory upgrades yet) and a 2btc investment.

Checking my inbox, nothing yet.

Ill send them a new high priority email now.

So we have two people here that cant even withdraw the BBP, correct?

Togo and JSheets?



I have deposits in flight to them. Been that way for 6 days. The wallet is not taking them in
newbie
Activity: 164
Merit: 0
Hi,
I deleted all files except wallet.dat and biblepay.conf  in my Sanctuary and wallet
on both stations I am at block 0 for ~12 hours.

From my Sanctuary  debug.log
Code:
2019-12-05 17:40:11 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:41:19 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:43:30 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:44:37 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:46:00 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:47:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 17:52:38 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:55:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:57:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 18:01:12 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:59 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:04:16 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt

Please try :

- Verify system time and time zone are correct
- Remove banlist.dat
- Start with "-erasechain=1"

The log above is normal (that means it wont share data until its synced).

EDIT:
Here is an extra addnode Im connected to now:
107.150.33.90
178.170.72.139


Thanks Togo!

I did the same and add to biblepay.conf:
addnode = 107.150.33.90
addnode = 178.170.72.139


Now I am getting blocks.

full member
Activity: 1260
Merit: 115
I withdrew BBP and ETH, they allowed the ETH first even though I requested it last, then 10-20 min later they allowed withdrawal of the BBP
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
I'm attempting to withdraw some coins out of Tokok for the first time (about $200 worth),
They are stuck in "Pending approval" status the past ~30 minutes

"Notice
- Only after the withdrawal request pass the system audit will it be made successfully
- Withdrawal of some currencies requires manual review. Review Time: 9:30-02:00 (UTC+8)"

https://www.reddit.com/r/Nash/comments/c0rpql/anyone_ever_have_delays_withdrawing_from_tokok/

I will report back how it goes, looks like they'll be doing manually reviewing in an hour

UPDATE: An hour and a half after I posted this, All my withdrawals were approved, got emailed approval for each one

I was able to withdraw from Tokok,
I think they operate in China timezone, so its about 2:22am for them right now

Ok, good.  We still have a complaint by JSheets and MIP, I know MIP said he tested and it did not work.

I guess you withdrew in ETHer, guys do we still have two bbp issues with TOKOK or does BBP allow deposits now?

full member
Activity: 1260
Merit: 115
I'm attempting to withdraw some coins out of Tokok for the first time (about $200 worth),
They are stuck in "Pending approval" status the past ~30 minutes

"Notice
- Only after the withdrawal request pass the system audit will it be made successfully
- Withdrawal of some currencies requires manual review. Review Time: 9:30-02:00 (UTC+8)"

https://www.reddit.com/r/Nash/comments/c0rpql/anyone_ever_have_delays_withdrawing_from_tokok/

I will report back how it goes, looks like they'll be doing manually reviewing in an hour

UPDATE: An hour and a half after I posted this, All my withdrawals were approved, got emailed approval for each one

I was able to withdraw from Tokok on Monday Dec 2nd (3 days ago),
I think they operate in China timezone, so its about 2:22am for them right now
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
Hi,
I deleted all files except wallet.dat and biblepay.conf  in my Sanctuary and wallet
on both stations I am at block 0 for ~12 hours.

From my Sanctuary  debug.log
Code:
2019-12-05 17:40:11 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:41:19 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:43:30 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:44:37 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:46:00 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:47:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 17:52:38 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:55:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:57:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 18:01:12 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:59 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:04:16 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt

Please try :

- Verify system time and time zone are correct
- Remove banlist.dat
- Start with "-erasechain=1"

The log above is normal (that means it wont share data until its synced).

EDIT:
Here is an extra addnode Im connected to now:
107.150.33.90
178.170.72.139
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
Could someone please give us an update on Tokok, if they are working yet?

I find it very unsettling to not receive a reply from them in 24 hours.

Let me know and tomorrow if we have not heard back, lets talk about forming a grievance.





Have not heard from them either and no deposits have gone through at this point in time

Same here. Support chat says that "all agents are busy" when they were available in few minutes some weeks ago

Ok thanks guys.

Well this is pretty serious for them not to reply to us (with no mandatory upgrades yet) and a 2btc investment.

Checking my inbox, nothing yet.

Ill send them a new high priority email now.

So we have two people here that cant even withdraw the BBP, correct?

Togo and JSheets?

newbie
Activity: 164
Merit: 0
Hi,
I deleted all files except wallet.dat and biblepay.conf  in my Sanctuary and wallet
on both stations I am at block 0 for ~12 hours.

From my Sanctuary  debug.log
Code:
2019-12-05 17:40:11 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:41:19 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:43:30 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:44:37 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:46:00 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:47:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 17:52:38 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:55:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 17:57:33 CActiveLegacyMasternodeManager::ManageState -- SYNC_IN_PROCESS: Sync in progress. Must wait until sync is complete to start Masternode
2019-12-05 18:01:12 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:53 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:02:59 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
2019-12-05 18:04:16 AcceptConnection -- masternode is not synced yet, skipping inbound connection attempt
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
The two Biblepay explorers do not match.

https://chainz.cryptoid.info/bbp/
http://explorer.biblepay.org/

Block 161668
https://chainz.cryptoid.info/bbp/block.dws?161668.htm
http://explorer.biblepay.org/block/f4283bb95a946f514271e1ce3aaa121facbb408afd5e4d26f187b2ed7e72a474

Looks like theyre both on same block now

Block 161668 Hash:
f4283bb95a946f514271e1ce3aaa121facbb408afd5e4d26f187b2ed7e72a474

Is this the correct chain?

I currently have the f428* on all nodes also.
full member
Activity: 1176
Merit: 111
full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
I'm trying to verify all of our network is on the chain with the highest work.

As a tool for the sanctuaries, please log into : pool.biblepay.org, click Reports | Sanctuary Health
And please verify your hash matches the hash on the right side of "Good sanctuaries" (matching that height next to it).

This hash is matching chainz and the Biblepay Explorer now.

I will continue to work on making my sancs match the vote levels next (I believe those will auto correct themselves once everyone ensures their sanc health matches).

Also please ensure your sanc is in DM mode now.

If your sanc does not match, you can type 'exec reassesschains' and if that does not work, re-start with -erasechain=1.

full member
Activity: 1176
Merit: 215
Jesus is the King of Kings and Lord of Lords
Rob said this:
" In the mean time, I enabled deterministic mode for all sancs, so please upgrade your sanctuary to deterministic if you have not yet.
(As I dont want to take any chances with the next superblock)."

Please follow this guide:

https://www.reddit.com/r/BiblePay/comments/clyxyc/upgrading_masternodes_sanctuaries_to/

I am aware of the DIP3 upgrade procedure. I read every post carefully, I think it's not time for classic sanctuaries to stop working yet, take a look at this:

The most probable outcome is we will focus on a Christmas mandatory upgrade and release all of this at once.

The biggest disruption this will require is everyone will need to be on deterministic sanctuaries by Christmas.  I am working with Apollon now to find out if they will support us during the cutover (or not).  If we do not have support from Apollon and Satoshi, we will recommend users who are about to be left behind use the new non-standard port feature to start a sanc.  But in the mean time I will do my best to set us up with a seamless path.

So I expected a mandatory release for classic sanctuaries to be deprecated.

But the most important point of my post is that something is wrong with governance right now, which doesn't have anything to do with my sanctuaries being classic or DIP3.

I wanted to wait til Christmas to force the cutover to DM also, as the last thing I wanted to do was add more instability.

However, I had no choice but to flip the spork for DM early after finding out the votes being cast by the classic sanctuaries are not being counted in DM mode once that switch was thrown (even though it was reverted).

So now we are running in pure deterministic mode in the mainnet branch.

Please upgrade to DM, Im sorry for the inconvenience.

EDIT: As far as the PAM hash not matching, this would not be a good time to check that, but to try to explain part of that now:  The PAM hash does not necessarily have to match for the network to be healthy, but Yes it should match in certain circumstances.  First, the supermajority does need to have a matching PAM hash.  For yours to match you must be on the same version, with the node synced, and with 'mnsync status' showing 999.  Then lets check it about 50% through the day (into the GSC contract).  At this point, most of the vote levels should be counted.  Then your PAM hash should match the supermajority of the sancs.  The one with the highest vote levels has an affinity programmed in to be voted in.  You would have to learn more about 'gobject listwild' to see if your sanc is #2 or #3 in the voting levels and those have different PAM hashes.

MIP
newbie
Activity: 362
Merit: 0
The two Biblepay explorers do not match.

https://chainz.cryptoid.info/bbp/
http://explorer.biblepay.org/

Block 161668
https://chainz.cryptoid.info/bbp/block.dws?161668.htm
http://explorer.biblepay.org/block/f4283bb95a946f514271e1ce3aaa121facbb408afd5e4d26f187b2ed7e72a474

Looks like theyre both on same block now

Block 161668 Hash:
f4283bb95a946f514271e1ce3aaa121facbb408afd5e4d26f187b2ed7e72a474

Is this the correct chain?

Seems so... I have the same in all my nodes.
full member
Activity: 1260
Merit: 115
full member
Activity: 574
Merit: 104
Hi guys,

I was having some masternode trouble and upgraded all my wallets to the latest releases. My controller wallet is now on version 1.4.5.3 and the masternode wallet is on 1.4.5.4.
The problem is that I don't seem to be able to start my masternode, since the protocol version is different:

Controller wallet:
Code:
  "version": 1040503,
  "protocolversion": 70737,
  "walletversion": 61000,

Masternode wallet:
Code:
  "version": 1040504,
  "protocolversion": 70749,
  "walletversion": 61000,

I built the masternode wallet from source and downloaded the exe from the website for my controller wallet (windows 10 x64).

Any ideas on how to fix this? Can I 'downgrade' the masternode wallet to 1.4.5.3.? Of is that not possible in an easy way and is it easier to just install the controller wallet on a Linux box and build from source for the time being? Or (Rob) will the Windows wallet download on the website also be updated to 1.4.5.4. shortly?

Thanks!


I had that 70749 checked in (in mainnet) for about 12 hours; you probably upgraded during that time  - but now its been rolled back to 70737.

Please just grab latest again and re-compile.

We seem to be OK now.

Affirmative; you can't start the sanc if the proto version is 70749, it must be 70737.  (That was the main problem).

I'm moving to plan B in testnet today; we will need to modify the testnet branch to peer with prod for the rollout later this month.




Check! I re-compiled and now they are on the same protocol version Smiley Thanks!

Also: thank you for the suggestion MIP, that was my plan-B.
Pages:
Jump to: