Topic: BiblePay - New Coin Launch - Official Thread - page 65. (Read 119833 times)

Check that you don't have any spaces at the start or end.  If not delete it and go back and right click on the address you want to use and select "Copy address" and then paste it into that box before saving.

Interesting. Will see if this trend changes.

Now only one of my miner is showing up in the pool, the rest have the same conf, version and chain but wouldn't join the pool. What's the fix here?

I've read through the opening post and still don't understand what exactly does religion has to do with this project except the hashing function. Why not take any other book? What religion does this relate to? And what charity funds exactly does this project support and why?

I'd say a coincidence, but it'd be something to keep an eye on.  The only solo blocks I've found were on a dedicated solo miner, never hit one when reverting from pool to solo.

dont think so, i been waiting hours, since they said they were compiling it...

Is 1.0.3.7 for windows released?

Yes, now I'm on block 7911, with 54 K  in my wallet, instead of 1.2 Millions :/
Thanks anyways

I'm on 1.0.3.7 as well for an hour, Pool is down so solo mining at this point.(Just found a block!)

Edit: One thing I also noticed is, all the solo blocks my miners found so far are when the miner was in pool and switched to solo by itself, haven't found a block while only mining solo. Is this is a coincidence or are there any parameters in play here?

Yup unfortunately Did you manage to get your wallet to sync again?

@bible_pay
Linux miner updated to v1.0.3.7 and mining
config set to pool.biblepay.org,
poolmining=false
block 7909
8 peers, only 1 peer v1.0.3.7

Ok, so the 900K i mined on the other chain is worthless I guess? Deleted the blocks folder and chainstate, downloaded an installed 1.0.3.5, and all those coins are "gone" from my wallet.

i can not withdraw from pool to my wallet.
it says invalid destination address.
whats wrong?

Same issue here, both with the new 1.0.3.7 under Linux and the Windows 1.0.3.5:

biblepay-cli getmininginfo
{
  "blocks": 7905,
  "currentblocksize": 1000,
  "currentblocktx": 0,
  "difficulty": 640.6745868486712,
  "errors": "",
  "genproclimit": 8,
  "networkhashps": 75282662533.70592,
  "hashps": 47789.31395525282,
  "minerstarttime": "09-16-2017 16:23:10",
  "pooledtx": 0,
  "testnet": false,
  "chain": "main",
  "biblepay-generate": true,
  "poolinfo1": "B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; ",
  "poolinfo2": "Submitting Solution 09-16-2017 16:23:24; Submitting Solution 09-16-2017 16:23:39; Submitting Solution 09-16-2017 16:23:38; Submitting Solution 09-16-2017 16:23:21; Submitting Solution 09-16-2017 16:23:33; Submitting Solution 09-16-2017 16:23:39; Submitting Solution 09-16-2017 16:23:33; Submitting Solution 09-16-2017 16:23:40; ",
  "poolinfo3": "BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_STALE; ",
  "miningpulse": 173,
  "poolmining": true
}


getmininginfo
{
  "blocks": 7906,
  "currentblocksize": 1000,
  "currentblocktx": 0,
  "difficulty": 920.1370789232158,
  "errors": "",
  "genproclimit": 3,
  "networkhashps": 69367553836.83989,
  "hashps": 3540.572663425176,
  "minerstarttime": "09-16-2017 16:29:18",
  "pooledtx": 0,
  "testnet": false,
  "chain": "main",
  "biblepay-generate": true,
  "poolinfo1": "B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; B6jtJfhZzbqiNUXfoQ2LdHVjWVtrHSELMS; ",
  "poolinfo2": "RMC_09-16-2017 16:29:26; RMC_09-16-2017 16:29:26; Submitting Solution 09-16-2017 16:29:46; ",
  "poolinfo3": "BLOCK_IS_STALE; ",
  "miningpulse": 3,
  "poolmining": true
}

I've been running the 1.0.3.7 for an hour or two, but my client is not appearing on the pool.  However, as the leaderboard is empty (and from the other posts), I presume that there is a separate issue there.

On a side note, I still occasionally get:

terminate called after throwing an instance of 'std::bad_alloc'
  what():  std::bad_alloc

when running ./biblepay-cli stop

Thanks

@happy_merchant:

This is the new pool address, so could you update the label to be on this address? It seems like all funds were transferred yesterday from the old address and that address stopped receiving block rewards.

On linux, I compiled from github, deleted 'blocks' and 'chainstate' folders, ran biblepayd and let the blockchain sync (very fast).

'getmininginfo' returns 'BLOCK_IS_STALE'.

'getblockhash 7900' is '9d65b7f97a9cae49c064df76231f2259987d7f2765391834758ce4ebb987b1b1'

I'm hitting the pool but getting :

  "poolinfo2": "Submitting Solution 09-16-2017 16:09:45;
  "poolinfo3": "BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_STALE; BLOCK_IS_S
TALE; BLOCK_IS_STALE; BLOCK_IS_STALE; ",

There was a new mandatory a few days ago so 1.0.3.4 and above would be the "correct" version.

You may want to try to to delete the "blocks" folder and "chainstate" folder.

I'm not sure about it but it could be possible that all the other nodes temporarily banned you since you were spamming them with the wrong version.

Block height out of range...

Note: I'm still using 1.0.3.1. Tried 1.0.3.5 but it wouldn't sync. Where kind I find the "correct version" for windows?
Thanks

I cant access http://pool.biblepay.org/ in web browser

"This site can’t be reached
pool.biblepay.org took too long to respond.
ERR_CONNECTION_TIMED_OUT"

Upgrading my linux miner to version 1.0.3.7