Topic: BITFURY ASIC 2.7Ghps 0.65 BTC en stock entrega 48h - page 2. (Read 23317 times)
As it seems that there is no aftermarket support from Miner Factory, I can't get any help regarding "overclocking" the Bitfury (what files and values to modify), or even know what to install in Arch Linux, to put it working with cgminer or bfgminer, via GPIO.
I thought one chip 2.7Gh/s ? Where is the problem?
ct1aic 1.8gh / s? is defective?
No, it goes to 1.96 GH/s, without modifications... I'm waiting for help from nekonos, to overclock it a little.
ct1aic 1.8gh / s? is defective?
I need some help.
I've connected two Bitfurys to my pi.
When I start cgminer I have a avg. of 2.357Gh/s.
I think thats to slow for two miners.
If I connect only the master I get approx 1.4Gh/s.
Where is the problem?
I have a big fan that cools the miners.
I checked also the Voltages on board and all voltages are in range.
So what can I do?
I've connected two Bitfurys to my pi.
When I start cgminer I have a avg. of 2.357Gh/s.
I think thats to slow for two miners.
If I connect only the master I get approx 1.4Gh/s.
Where is the problem?
I have a big fan that cools the miners.
I checked also the Voltages on board and all voltages are in range.
So what can I do?
@nekonos
could you upload the RPi File to another location?
2013-Sep-27_BFSB_GM2.rar
could you upload the RPi File to another location?
2013-Sep-27_BFSB_GM2.rar
Quote
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
This account's public links are generating too much traffic and have been temporarily disabled!
Hello ct1ac
The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
You can try another image version for rapsberry pi if you have other sd card 4gb.
This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
You can try another image version for rapsberry pi if you have other sd card 4gb.
This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
I tried the new image, but I went back to the old image I received with the kit, as I saw 2 cgminer's running and i was getting plenty of "trash" from each cgminer screen.
Waiting for more help, regarding overclock, I put the RPI inside a box and fixed the Bitfury:
Hello ct1ac
The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
Yes, with that sh drivers.sh, the bitfurystarts being detected.The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
You can try another image version for rapsberry pi if you have other sd card 4gb.
This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
I'm downloading it... I'll return later (5 hours left This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
)-Best regards.
Rui
Hello ct1ac
The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
You can try another image version for rapsberry pi if you have other sd card 4gb.
This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
The problem you have with raspebrry is to load the driver.
I write this from memory try:
cd spic1
sudo sh drivers.sh
cd ..
cd cgminer-bitfury
sudo ./cgminer -o "pool" -u "user -p "pass"
You can try another image version for rapsberry pi if you have other sd card 4gb.
This - ver. 2: 2013-Sep-27_BFSB_GM2 have a http interface more frendly, you can connect directly with ip of raspberry. We don't test with 1 chip board but should work.
You will need win32diskimager to write the img file to sdcard. Guide
I will contact latter for other thinks
Regards
Ok, I think I could start mining, with:
Each time I restart the RPI, I need to do again
Now, I need to automate the miner, when restarting the RPI... HELP... please...
Quote
pi@raspberrypi ~ $ cd spitest
pi@raspberrypi ~/spitest $ sudo sh drivers.sh
pi@raspberrypi ~/spitest $ sudo ./spitest
pi@raspberrypi ~/spitest $ cd
pi@raspberrypi ~ $ cd cgminer-bitfury
pi@raspberrypi ~/cgminer-bitfury $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2195
pi@raspberrypi ~/cgminer-bitfury $ [2013-10-23 14:21:34] Started cgminer 3.3.1
[2013-10-23 14:21:35] BITFURY chip #1 detected
[2013-10-23 14:21:38] BITFURY: 1 chips detected!
[2013-10-23 14:21:38] Probing for an alive pool
[2013-10-23 14:21:48] Network diff set to 268M
[2013-10-23 14:21:52] Accepted c6a37cde Diff 1/1 BITFURY 0
[2013-10-23 14:21:57] Accepted b620fc90 Diff 1/1 BITFURY 0
[2013-10-23 14:22:00] Accepted 090beaac Diff 28/1 BITFURY 0
[2013-10-23 14:22:03] Accepted 97987bf0 Diff 1/1 BITFURY 0
[2013-10-23 14:22:03] Accepted a961a9a3 Diff 1/1 BITFURY 0
[2013-10-23 14:22:07] Accepted 585076bc Diff 2/1 BITFURY 0
[2013-10-23 14:22:08] Accepted 3d6e2ed0 Diff 4/1 BITFURY 0
[2013-10-23 14:22:08] Accepted ffee852d Diff 1/1 BITFURY 0
[2013-10-23 14:22:11] Accepted f74c93b4 Diff 1/1 BITFURY 0
[2013-10-23 14:22:16] Accepted 68955048 Diff 2/1 BITFURY 0
[2013-10-23 14:22:16] Accepted d78defdd Diff 1/1 BITFURY 0
[2013-10-23 14:22:19] Accepted 58c9e704 Diff 2/1 BITFURY 0
[2013-10-23 14:22:19] Accepted 97158e9c Diff 1/1 BITFURY 0
[2013-10-23 14:22:21] Accepted 1dca4d5e Diff 8/1 BITFURY 0
[2013-10-23 14:22:21] Accepted 1cc463cd Diff 8/1 BITFURY 0
[2013-10-23 14:22:23] Stratum from pool 0 requested work restart
[2013-10-23 14:22:23] Accepted 561d48e3 Diff 2/1 BITFURY 0
[2013-10-23 14:22:26] Accepted 7d45623b Diff 2/1 BITFURY 0
[2013-10-23 14:22:29] Accepted cf2e3ee2 Diff 1/1 BITFURY 0
[2013-10-23 14:22:30] Accepted 7a2f94ac Diff 2/1 BITFURY 0
[2013-10-23 14:22:33] Accepted effe4b00 Diff 1/1 BITFURY 0
[2013-10-23 14:22:33] Accepted 879b5d57 Diff 1/1 BITFURY 0
[2013-10-23 14:22:40] Accepted 4fe17103 Diff 3/1 BITFURY 0
[2013-10-23 14:22:41] Accepted e91d5017 Diff 1/1 BITFURY 0
[2013-10-23 14:22:46] Accepted e83a0ecc Diff 1/1 BITFURY 0
[2013-10-23 14:22:49] Accepted 39b6c293 Diff 4/1 BITFURY 0
[2013-10-23 14:22:51] Accepted 3e7c4540 Diff 4/1 BITFURY 0
[2013-10-23 14:22:54] Accepted c2f73069 Diff 1/1 BITFURY 0
[2013-10-23 14:22:56] Stratum from pool 0 detected new block
[2013-10-23 14:22:57] Pool 0 stale share detected, submitting as user requested
[2013-10-23 14:22:57] Rejected 4b8c4a2a Diff 3/1 BITFURY 0 (Stale work)
[2013-10-23 14:22:58] Pool 0 stale share detected, submitting as user requested
[2013-10-23 14:22:58] Rejected e0b916f0 Diff 1/1 BITFURY 0 (Stale work)
pi@raspberrypi ~/spitest $ sudo sh drivers.sh
pi@raspberrypi ~/spitest $ sudo ./spitest
pi@raspberrypi ~/spitest $ cd
pi@raspberrypi ~ $ cd cgminer-bitfury
pi@raspberrypi ~/cgminer-bitfury $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2195
pi@raspberrypi ~/cgminer-bitfury $ [2013-10-23 14:21:34] Started cgminer 3.3.1
[2013-10-23 14:21:35] BITFURY chip #1 detected
[2013-10-23 14:21:38] BITFURY: 1 chips detected!
[2013-10-23 14:21:38] Probing for an alive pool
[2013-10-23 14:21:48] Network diff set to 268M
[2013-10-23 14:21:52] Accepted c6a37cde Diff 1/1 BITFURY 0
[2013-10-23 14:21:57] Accepted b620fc90 Diff 1/1 BITFURY 0
[2013-10-23 14:22:00] Accepted 090beaac Diff 28/1 BITFURY 0
[2013-10-23 14:22:03] Accepted 97987bf0 Diff 1/1 BITFURY 0
[2013-10-23 14:22:03] Accepted a961a9a3 Diff 1/1 BITFURY 0
[2013-10-23 14:22:07] Accepted 585076bc Diff 2/1 BITFURY 0
[2013-10-23 14:22:08] Accepted 3d6e2ed0 Diff 4/1 BITFURY 0
[2013-10-23 14:22:08] Accepted ffee852d Diff 1/1 BITFURY 0
[2013-10-23 14:22:11] Accepted f74c93b4 Diff 1/1 BITFURY 0
[2013-10-23 14:22:16] Accepted 68955048 Diff 2/1 BITFURY 0
[2013-10-23 14:22:16] Accepted d78defdd Diff 1/1 BITFURY 0
[2013-10-23 14:22:19] Accepted 58c9e704 Diff 2/1 BITFURY 0
[2013-10-23 14:22:19] Accepted 97158e9c Diff 1/1 BITFURY 0
[2013-10-23 14:22:21] Accepted 1dca4d5e Diff 8/1 BITFURY 0
[2013-10-23 14:22:21] Accepted 1cc463cd Diff 8/1 BITFURY 0
[2013-10-23 14:22:23] Stratum from pool 0 requested work restart
[2013-10-23 14:22:23] Accepted 561d48e3 Diff 2/1 BITFURY 0
[2013-10-23 14:22:26] Accepted 7d45623b Diff 2/1 BITFURY 0
[2013-10-23 14:22:29] Accepted cf2e3ee2 Diff 1/1 BITFURY 0
[2013-10-23 14:22:30] Accepted 7a2f94ac Diff 2/1 BITFURY 0
[2013-10-23 14:22:33] Accepted effe4b00 Diff 1/1 BITFURY 0
[2013-10-23 14:22:33] Accepted 879b5d57 Diff 1/1 BITFURY 0
[2013-10-23 14:22:40] Accepted 4fe17103 Diff 3/1 BITFURY 0
[2013-10-23 14:22:41] Accepted e91d5017 Diff 1/1 BITFURY 0
[2013-10-23 14:22:46] Accepted e83a0ecc Diff 1/1 BITFURY 0
[2013-10-23 14:22:49] Accepted 39b6c293 Diff 4/1 BITFURY 0
[2013-10-23 14:22:51] Accepted 3e7c4540 Diff 4/1 BITFURY 0
[2013-10-23 14:22:54] Accepted c2f73069 Diff 1/1 BITFURY 0
[2013-10-23 14:22:56] Stratum from pool 0 detected new block
[2013-10-23 14:22:57] Pool 0 stale share detected, submitting as user requested
[2013-10-23 14:22:57] Rejected 4b8c4a2a Diff 3/1 BITFURY 0 (Stale work)
[2013-10-23 14:22:58] Pool 0 stale share detected, submitting as user requested
[2013-10-23 14:22:58] Rejected e0b916f0 Diff 1/1 BITFURY 0 (Stale work)
Each time I restart the RPI, I need to do again
Quote
pi@raspberrypi ~ $ cd spitest
pi@raspberrypi ~/spitest $ sudo sh drivers.sh
pi@raspberrypi ~/spitest $ sudo ./spitest
before starting cgminerpi@raspberrypi ~/spitest $ sudo sh drivers.sh
pi@raspberrypi ~/spitest $ sudo ./spitest
Now, I need to automate the miner, when restarting the RPI... HELP... please...
Hi sorry for delay,
We had many problems with the supply of raspberry pi. Now we have stock to control this problems with delays.
Regards
Albert
Hi Albert. I already received the Bitfury kit, with a RPI 512 MBytes, a SD, a Bitfury, a 5V 0.5A PU and the cables needed to connect them all.We had many problems with the supply of raspberry pi. Now we have stock to control this problems with delays.
Regards
Albert
Quote
El kit consta de una placa con 1 chip Bitfury, Raspberry PI B con tarjeta de 8GB todo configurado, adaptador de corriente 12V 2A, y todos los cables necesarios.
Many thanks. But didn't you spoke (and later deleted) about a gift?
Quote
I hope you like the gift that we have added in your parcel.
Regards
Albert
Regards
Albert
I connected a 5V 3A PU to the red/black connectors and started RPI with image you sent.
I connected via SSH with pi/raspberry
tried:
Quote
pi@raspberrypi ~ $ cd cgminer
pi@raspberrypi ~/cgminer $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2183
pi@raspberrypi ~/cgminer $ [2013-10-23 13:24:56] Started cgminer 3.4.0
[2013-10-23 13:24:56] No devices detected!
[2013-10-23 13:24:56] Waiting for USB hotplug devices or press q to quit
[2013-10-23 13:24:56] Probing for an alive pool
[2013-10-23 13:25:14] Network diff set to 268M
(5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
No fury detected. I verified the 5 connectors and they are correctly connected, comparing with the schema in this thread.pi@raspberrypi ~/cgminer $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2183
pi@raspberrypi ~/cgminer $ [2013-10-23 13:24:56] Started cgminer 3.4.0
[2013-10-23 13:24:56] No devices detected!
[2013-10-23 13:24:56] Waiting for USB hotplug devices or press q to quit
[2013-10-23 13:24:56] Probing for an alive pool
[2013-10-23 13:25:14] Network diff set to 268M
(5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
Then I went to a more logic folder...
Quote
pi@raspberrypi ~ $ dir
Desktop cgminer-master spic1 spitest.tgz
cgminer chainminer spic1.tgz stratum-mining-proxy
cgminer-bitfury ocr_pi.png spitest
pi@raspberrypi ~ $ cd cgminer-bitfury
pi@raspberrypi ~/cgminer-bitfury $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2249
pi@raspberrypi ~/cgminer-bitfury $ [2013-10-23 13:40:50] Started cgminer 3.3.1
Unable to open SPI device: No such file or directory
Desktop cgminer-master spic1 spitest.tgz
cgminer chainminer spic1.tgz stratum-mining-proxy
cgminer-bitfury ocr_pi.png spitest
pi@raspberrypi ~ $ cd cgminer-bitfury
pi@raspberrypi ~/cgminer-bitfury $ sudo ./cgminer -o stratum+tcp://mint.bitminter.com:3333 -u ct1aic_RPI4 -p xxxxxxxx &
[1] 2249
pi@raspberrypi ~/cgminer-bitfury $ [2013-10-23 13:40:50] Started cgminer 3.3.1
Unable to open SPI device: No such file or directory
What do I do next?
P.S.:
Quote
Suitable for begginers.
Beginners don't usually have Linux skills... Beginners usually configure cgminer via a software like MinePeon, with a web interface... 
Nekonos e preços serão revistos? 2.10BTC para 12gh/s está muy alto!
gracias
gracias
Hola otra vez pues yo sigo con los problemas de Liqpay pues me tiene congelado desde mas de 12 dias 450 USD que mande para comprar los bitcoin para hacerte la compra, la verdad me esta afectando mucho ese retraso pues los Bitcoin cuando hice el traspaso con LiqPay costaban $ 123 USD ahora cuestan 162 USD casi 40 USD mas
en su pagina dice que se puede pagar con VISA o MASTERCARD pero al pasar a la seccion de pago no hay esas opciones nada mas hay:
1. tranferencia bancaria
2. tranferencia de Bitcoin
¿donde queda el pago con VISA o MASTERCARD? deberian aceptar otros pagos por ejemplo de OKPAY, o algo distinto para pagar con eur
pero bueno quiero preguntarte sobre LiteFury, la veo que segun viene con 4 chip para tener poder de 12Ghps, pero donde tengo una duda algunas dudas.
1.- Viene lista y completa para conectarla a la Raspberry PI. que tambien les compraria a ustedes o hay que soldar componentes.
2.- en su producto "Bitfury ASIC Board with 1 chip fully assembled" se puede combinar con varios para sumar mas poder con una sola Raspberry PI. con la LiteFury tambien se puede combinar varias para tener mas poder de hash.
gracias.
en su pagina dice que se puede pagar con VISA o MASTERCARD pero al pasar a la seccion de pago no hay esas opciones nada mas hay:
1. tranferencia bancaria
2. tranferencia de Bitcoin
¿donde queda el pago con VISA o MASTERCARD? deberian aceptar otros pagos por ejemplo de OKPAY, o algo distinto para pagar con eur
pero bueno quiero preguntarte sobre LiteFury, la veo que segun viene con 4 chip para tener poder de 12Ghps, pero donde tengo una duda algunas dudas.
1.- Viene lista y completa para conectarla a la Raspberry PI. que tambien les compraria a ustedes o hay que soldar componentes.
2.- en su producto "Bitfury ASIC Board with 1 chip fully assembled" se puede combinar con varios para sumar mas poder con una sola Raspberry PI. con la LiteFury tambien se puede combinar varias para tener mas poder de hash.
gracias.
Hola rauls
Empezamos ha hacer los tramites para el pago con visa pero lo dejamos por que es bastante fácil cancelar el pago una vez recibido el producto.
En un par de días tendremos algunos litefury funcionando para ver hasta donde suben esperamos llegar o aproximarnos a esos 12Ghs. también pondremos datos de consumo.
La placa tendrá montados unos conectores macho hembra por cada lado de forma que se pueden conectar entre si haciendo cadena.
La primera placa de la cadena(máster) se conecta con el raspberry pi mediante 5 cables de 20cm que incluiremos. Pondremos un esquema sera bastante más sencillo que el de 1 chip.
La placa monta un regulador que se puede alimentar de 5V a 14V dando hasta 14A (más de 3 Amperios por chip) con una eficiencia del 85% Para la alimentación dispone de un bloque de conexión con tornillos para cable hasta 1'5mm2
Hola otra vez pues yo sigo con los problemas de Liqpay pues me tiene congelado desde mas de 12 dias 450 USD que mande para comprar los bitcoin para hacerte la compra, la verdad me esta afectando mucho ese retraso pues los Bitcoin cuando hice el traspaso con LiqPay costaban $ 123 USD ahora cuestan 162 USD casi 40 USD mas
en su pagina dice que se puede pagar con VISA o MASTERCARD pero al pasar a la seccion de pago no hay esas opciones nada mas hay:
1. tranferencia bancaria
2. tranferencia de Bitcoin
¿donde queda el pago con VISA o MASTERCARD? deberian aceptar otros pagos por ejemplo de OKPAY, o algo distinto para pagar con eur
pero bueno quiero preguntarte sobre LiteFury, la veo que segun viene con 4 chip para tener poder de 12Ghps, pero donde tengo una duda algunas dudas.
1.- Viene lista y completa para conectarla a la Raspberry PI. que tambien les compraria a ustedes o hay que soldar componentes.
2.- en su producto "Bitfury ASIC Board with 1 chip fully assembled" se puede combinar con varios para sumar mas poder con una sola Raspberry PI. con la LiteFury tambien se puede combinar varias para tener mas poder de hash.
gracias.
en su pagina dice que se puede pagar con VISA o MASTERCARD pero al pasar a la seccion de pago no hay esas opciones nada mas hay:
1. tranferencia bancaria
2. tranferencia de Bitcoin
¿donde queda el pago con VISA o MASTERCARD? deberian aceptar otros pagos por ejemplo de OKPAY, o algo distinto para pagar con eur
pero bueno quiero preguntarte sobre LiteFury, la veo que segun viene con 4 chip para tener poder de 12Ghps, pero donde tengo una duda algunas dudas.
1.- Viene lista y completa para conectarla a la Raspberry PI. que tambien les compraria a ustedes o hay que soldar componentes.
2.- en su producto "Bitfury ASIC Board with 1 chip fully assembled" se puede combinar con varios para sumar mas poder con una sola Raspberry PI. con la LiteFury tambien se puede combinar varias para tener mas poder de hash.
gracias.
Hi sorry for delay,
We had many problems with the supply of raspberry pi. Now we have stock to control this problems with delays.
Regards
Albert
We had many problems with the supply of raspberry pi. Now we have stock to control this problems with delays.
Regards
Albert
I bought last 09 October, one Bitfury ASIC starter KIT with Raspberry.
More than one week has passed and my order still has the status Processing. When I bought and paid it, the availability of the kit was In stock.
I think that the 48h delivery has already passed and will not be fulfilled...
Google translate:
UPDATE: After this comment, I received the tracking number for this order. Great news! Many thanks, Miner Factory and nekonos.
More than one week has passed and my order still has the status Processing. When I bought and paid it, the availability of the kit was In stock.
I think that the 48h delivery has already passed and will not be fulfilled...
Google translate:
Quote
Compré pasado 09 de octubre una kit ASIC Bitfury con Raspberry Pi.
Más de una semana ha pasado y el estado de mi pedido todavía tiene el Tiempo de ejecución. Cuando compré y pagué, la disponibilidad del kit era Disponible.
Creo que la entrega 48h no será respetada...
Más de una semana ha pasado y el estado de mi pedido todavía tiene el Tiempo de ejecución. Cuando compré y pagué, la disponibilidad del kit era Disponible.
Creo que la entrega 48h no será respetada...
UPDATE: After this comment, I received the tracking number for this order. Great news! Many thanks, Miner Factory and nekonos.
Buenas ya esta terminado el diseño de 4 chips terminado. Ahora toca unos días de pruebas y empezar producción.
Trataremos de llegar a los 12gh/s
Saludos
Trataremos de llegar a los 12gh/s
Saludos
Ficamos aguardar mais noticias.
Buena suerta!
Buenas ya esta terminado el diseño de 4 chips terminado. Ahora toca unos días de pruebas y empezar producción.
Trataremos de llegar a los 12gh/s
Saludos
Trataremos de llegar a los 12gh/s
Saludos
Con la llegada de nuevos chips, ponemos en venta la placa de 1 chip a mitad de precio, esto es, a 0.65 BTC. Ya están en stock en minerfactory.com.
Por otro lado, en poco tiempo tendremos nuevas placas de 4, 8 y 16 chips con diseños mucho mas sencillos, más aptos para el usuario final.
Por otro lado, en poco tiempo tendremos nuevas placas de 4, 8 y 16 chips con diseños mucho mas sencillos, más aptos para el usuario final.
hola amigo, me gustaria traer a argentina un par de esas, pero en realidad no se que necesito aparte de la placa y la pc , para salir minando. desde ya muchas gracias.
Que buenas noticias .
A sí me gusta las cosas, hacerlas sencillas para los menos expertos enla materia. Después ya vendrá el tema del famoso ROÍ
.
Felicidades chicos
Espero subáis fotos de los nuevos diseños cuando los pongáis a la venta.
Un abrazo y buen inicio de semana ara todos.
Antuam
.A sí me gusta las cosas, hacerlas sencillas para los menos expertos enla materia. Después ya vendrá el tema del famoso ROÍ
.Felicidades chicos
Espero subáis fotos de los nuevos diseños cuando los pongáis a la venta.
Un abrazo y buen inicio de semana ara todos.
Antuam
Jump to: