Wait, how does one mine BTCguild like mentioned above? I have it set to mine and am using --startLP but it says error in API info. for btcg...
I looked at the pools.cfg and it seems to want round_shares...then I go look at the actual api info from btcg and that stat is missing...
Also, what do I enter in the editable "payout" field for the web stats page?
Topic: bitHopper: Python Pool Hopper Proxy - page 64. (Read 355678 times)
not sure if i can test kiwi since their website only says
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Quote
'CONTENT_LENGTH'
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Penalty isn't set, so it's 1.0 at the moment.
Today I'm hopping for exactly a week and I should have earned 11 Bitcoins, but I earned 12 and there are stil some not paid yet because the round hasn't finished (small pools).
It will take another week to be sure but I think it works
What MHash do you run at?
7x 5870 = 2950Mhash/s.
Righto, that makes sense
not sure if i can test kiwi since their website only says
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Quote
'CONTENT_LENGTH'
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Penalty isn't set, so it's 1.0 at the moment.
Today I'm hopping for exactly a week and I should have earned 11 Bitcoins, but I earned 12 and there are stil some not paid yet because the round hasn't finished (small pools).
It will take another week to be sure but I think it works
What MHash do you run at?
7x 5870 = 2950Mhash/s.
not sure if i can test kiwi since their website only says
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Quote
'CONTENT_LENGTH'
so magnet.,. your mine slush test.. I'm guessing when it is set to mine you also set penalty is 4 times?
Penalty isn't set, so it's 1.0 at the moment.
Today I'm hopping for exactly a week and I should have earned 11 Bitcoins, but I earned 12 and there are stil some not paid yet because the round hasn't finished (small pools).
It will take another week to be sure but I think it works
What MHash do you run at?
Um actually you can do both. If it gets the LP from btcguild first it mines btcguild. If it gets the Lp from deepbit first it mines deepbit. It only will only mine one based on a guess.
Логин worker'а Время последнего решения Решений за раунд Примерная скорость (MH/s) Примерная доход worker'a
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
Does it show your reward for the last block? I think maybe it just shows after the 120 confirmations have been done.
Oh, yeah, I guess it does
I was more surprised by the 2 BTC for 1011 Shares I think it will drop but it looks cool
And I can't figure out where that stupid error is coming from...
This is very highly formalized guessing. It should work though. Basically if it gets the LP for the current block from deepbit first and no other blocks apis go down b/c they found a block it assumes it is from deepbit. Same thing for btcguild if you set that up. It will slice deepbit until another block is found by someone else.
This is very highly formalized guessing. It should work though. Basically if it gets the LP for the current block from deepbit first and no other blocks apis go down b/c they found a block it assumes it is from deepbit. Same thing for btcguild if you set that up. It will slice deepbit until another block is found by someone else.
ok to be clear.. it is either deepbit or btcguild and not both.. or will it assume the block is either deepbit or btcguild and mine them both?
Логин worker'а Время последнего решения Решений за раунд Примерная скорость (MH/s) Примерная доход worker'a
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
Does it show your reward for the last block? I think maybe it just shows after the 120 confirmations have been done.
Yeah. Its 43% for prop pools. 10% for slush style pools.
I found the error. I should probably submit it to twisted.
@gentarkin
Yeah that is the behavior we want.
@gentarkin
Yeah that is the behavior we want.
Cool, so all other prop pools, well most of the other ones we mine till approx half difficulty? then hop to another pool lower than that or backup?
Hehe, just tryin to wrap my head around how all this works.
I found the error. I should probably submit it to twisted.
@gentarkin
Yeah that is the behavior we want.
@gentarkin
Yeah that is the behavior we want.
Логин worker'а Время последнего решения Решений за раунд Примерная скорость (MH/s) Примерная доход worker'a
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
MaGNeT 2011-08-07 21:45:34 1011 2090 2.03167075
slush's pool hopping seems to join and then hop out till about 11% is this correct behaviour? It doesnt touch slush till it finds it below 11% again...correct as well?
I notice my shares value decay on slush after 11% .. I assume this is correct behaviour because we are just hoping round time will be really lucky and our shares actually be valuable?
I notice my shares value decay on slush after 11% .. I assume this is correct behaviour because we are just hoping round time will be really lucky and our shares actually be valuable?
Is the stats page delayed on deepbit as well? If not then couldn't you tell if there was a new block started by seeing when the last block was submitted or even if if a new block was added to the found blocks stats? If you can figure out what time the server is in you could even figure out how long the new block was running for from the last block found time. I may wrong about all this, just a thought I had.
Edit: Never mind the stats are delayed.
Edit: Never mind the stats are delayed.
And I can't figure out where that stupid error is coming from...
EDIT: I fixed it. Update
This is very highly formalized guessing. It should work though. Basically if it gets the LP for the current block from deepbit first and no other blocks apis go down b/c they found a block it assumes it is from deepbit. Same thing for btcguild if you set that up. It will slice deepbit until another block is found by someone else.
EDIT: I fixed it. Update
This is very highly formalized guessing. It should work though. Basically if it gets the LP for the current block from deepbit first and no other blocks apis go down b/c they found a block it assumes it is from deepbit. Same thing for btcguild if you set that up. It will slice deepbit until another block is found by someone else.
cow you said it should work with btcguild.. but should it work with btcguild and deepbit at the same time?
arent you kinda guessing if deep has a block?
arent you kinda guessing if deep has a block?
another for the collection
Code:
[21:51:45] LP Call mtred.com:8337/LP
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/twisted/internet/tcp.py", line 519, in connectionLost
protocol.connectionLost(reason)
File "/home/alex/bitHopper/_newclient.py", line 823, in dispatcher
return func(*args, **kwargs)
File "/home/alex/bitHopper/_newclient.py", line 1427, in _connectionLost_WAITING
self._disconnectParser(reason)
File "/home/alex/bitHopper/_newclient.py", line 1356, in _disconnectParser
parser.connectionLost(reason)
------
File "/home/alex/bitHopper/_newclient.py", line 486, in connectionLost
self.bodyDecoder.noMoreData()
File "/usr/lib/python2.7/dist-packages/twisted/web/http.py", line 1388, in noMoreData
finishCallback('')
File "/home/alex/bitHopper/_newclient.py", line 401, in _finished
self.finisher(rest)
File "/home/alex/bitHopper/_newclient.py", line 1331, in _finishResponse
connHeaders = self._parser.connHeaders.getRawHeaders('connection')
exceptions.AttributeError: 'NoneType' object has no attribute 'connHeaders'
[21:51:45] polmine: 2171745
Oh. I get that error as well. For some reason one of the LP sites is pushing out uniquely bad data. You can ignore it. I'll add an errBack for it.
Cool, how would one know if deepbit is working? Cuz, I still see no polling on them using --startLP and the stats on the localhost stat page dont update at all...
And what scheduler is known best right now? ... since I dont really know the diff between them....
Oh. I get that error as well. For some reason one of the LP sites is pushing out uniquely bad data. You can ignore it. I'll add an errBack for it.
Update to python 2.7. I'll add in a catch but you won't get sorting.
EDIT: Catch is added, update and see if it works.
EDIT: Catch is added, update and see if it works.
Yeah works now. Going to update to 2.7
Jump to: