BITMAIN Antminer S1 support and OverClocking thread - page 7.

jedimstr

hero member

Activity: 798

Merit: 1000

Quote from: bjalbert on May 30, 2014, 12:22:38 PM

So nobody could figure the freq for 380 or 385? At 393 I get 3% HW error and at 375 I get .08 so I want to try something inbetween. I know in the larger picture it doesn't matter but I am anal about this stuff.

Try this:

Code:

        #option 'freq_value'    '5e85'  #387.5M
        #option 'chip_freq'     '387.5'
        #option 'timeout'       '37'

bjalbert

full member

Activity: 166

Merit: 100

So nobody could figure the freq for 380 or 385? At 393 I get 3% HW error and at 375 I get .08 so I want to try something inbetween. I know in the larger picture it doesn't matter but I am anal about this stuff.

Tigggger

legendary

Activity: 1098

Merit: 1000

Quote from: BCwinning on May 30, 2014, 11:53:24 AM

Quote from: Tigggger on May 30, 2014, 10:05:08 AM

Yes, I have lots of them and it was working until earlier today, so I think something has gone wrong

If a reflash doesn't cure it, it might be a broken controller.
Can you configure another interface and bring it up? ie: wifi/lan?

It's wierd how I can connect to it ok from the ip, but anyway just moved it next to my router, turned on wireless, deleted the wan interface and working again over wi-fi.

BCwinning

hero member

Activity: 770

Merit: 500

Quote from: Tigggger on May 30, 2014, 10:05:08 AM

Quote from: daddyfatsax on May 30, 2014, 08:26:19 AM

Do you have your DNS stuff set correctly? Had this problem when moving my S1's from my home to my office. Home was 192.168.2.1 and work is .254, or you can use google 8.8.8.8.

Yes, I have lots of them and it was working until earlier today, so I think something has gone wrong

If a reflash doesn't cure it, it might be a broken controller.
Can you configure another interface and bring it up? ie: wifi/lan?

Tigggger

legendary

Activity: 1098

Merit: 1000

Quote from: daddyfatsax on May 30, 2014, 08:26:19 AM

Do you have your DNS stuff set correctly? Had this problem when moving my S1's from my home to my office. Home was 192.168.2.1 and work is .254, or you can use google 8.8.8.8.

Yes, I have lots of them and it was working until earlier today, so I think something has gone wrong

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Do you have your DNS stuff set correctly? Had this problem when moving my S1's from my home to my office. Home was 192.168.2.1 and work is .254, or you can use google 8.8.8.8.

Tigggger

legendary

Activity: 1098

Merit: 1000

Got a strange network problem with one of my Ants

I can log in fine through the GUI and SSH

The status page shows this which is why it's not mining

However the network page does show it connected.

I've triple checked all the settings, and even done system reset with the button on the controller card.

Any ideas ?

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: dr.copycat on May 29, 2014, 02:56:53 PM

AntMiner S1, new 2days old. Accepted 668, Rejected12, HW 123, Utility 43, WU 2505, DiffA 37616, DiffR 240, BestShare 40547.
Is it too many errors,on other machines I dont have hw errors

Use the Antminer Monitor to watch for error and other parameters. That software will show error in %.

dr.copycat

newbie

Activity: 15

Merit: 0

0.36079456494 %, Is it a good or bad

wedgy2k

sr. member

Activity: 329

Merit: 251

Quote from: dr.copycat on May 29, 2014, 02:56:53 PM

AntMiner S1, new 2days old. Accepted 668, Rejected12, HW 123, Utility 43, WU 2505, DiffA 37616, DiffR 240, BestShare 40547.
Is it too many errors,on other machines I dont have hw errors

Try this
http://instacalc.com/20772
I got it off of another member (Sorry can't remember who)

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: dr.copycat on May 29, 2014, 02:56:53 PM

AntMiner S1, new 2days old. Accepted 668, Rejected12, HW 123, Utility 43, WU 2505, DiffA 37616, DiffR 240, BestShare 40547.
Is it too many errors,on other machines I dont have hw errors

0.3% is fine.

dr.copycat

newbie

Activity: 15

Merit: 0

AntMiner S1, new 2days old. Accepted 668, Rejected12, HW 123, Utility 43, WU 2505, DiffA 37616, DiffR 240, BestShare 40547.
Is it too many errors,on other machines I dont have hw errors

Aexcu

full member

Activity: 130

Merit: 100

My AntMiner S2 doesn't show any BestShare, the figure remains at 0.

The miner has been mining 100% fine otherwise for weeks. Has latest firmware. All my S1's show a BestShare and screenshots from other people's S2's seem to have a BestShare...

Any clues?

wedgy2k

sr. member

Activity: 329

Merit: 251

Quote from: Moria843 on May 29, 2014, 01:42:05 PM

Questions for those of you who have run S1s for a long time:
Should I just not worry about the fins getting dirty?
Do you have to occasionally clean and about how often?

Thanks for sharing your experiences.

I have the additional "exhaust" fitted to mine
Once a fortnight I will take the intake fan off, vacuum the dust build up, blow and brush out the fan and put back together
They will run quieter and cooler if you do this

Moria843

sr. member

Activity: 442

Merit: 250

Found Lost beach - quiet now

Questions on S1 heat sink cleaning/adding air filters

Been running my S1s for 3 months. I've noticed dust build-up in the heat sink fins and have been experimenting with adding filters to keep them clean. Thought it would only cause the fan speed to increase but all experimenting causes too much heat or the power to go above 850 W (I have 2 overclocked S1s per Corsair 850RM, also have 2 fans on each S1).

Wondering if I'm worrying about something I don't need to worry about??

Questions for those of you who have run S1s for a long time:
Should I just not worry about the fins getting dirty?
Do you have to occasionally clean and about how often?

Thanks for sharing your experiences.

mindtrip

legendary

Activity: 1167

Merit: 1009

I have found out some info on the OC of the S2 Please follow my new thread here I will keep it updated with my progress
https://bitcointalksearch.org/topic/antminer-s2-support-and-overclocking-thread-629997

SecureErase

member

Activity: 83

Merit: 10

Quote from: Moria843 on May 28, 2014, 11:08:01 AM

Had the green LED on one blade of an S1 stop blinking and is completely off. Is this supposed to indicate or mean anything?

The unit is still hashing at about 190 Gh/s.

Broken led, if it hashes as before.

K3nn3th

newbie

Activity: 25

Merit: 0

Thank you, I was just looking for something like this.
Keep up the good work.

mindtrip

legendary

Activity: 1167

Merit: 1009

Seems like root access via SSH has a different password then the web interface does anyone have that? I wanted to poke around and test some OC Settings I upgraded to a 1300 Watt Platinum PSU. Will old Clock settings work on the new S2's?

Moria843

sr. member

Activity: 442

Merit: 250

Found Lost beach - quiet now

Had the green LED on one blade of an S1 stop blinking and is completely off. Is this supposed to indicate or mean anything?

The unit is still hashing at about 190 Gh/s.

Topic: BITMAIN Antminer S1 support and OverClocking thread - page 7. (Read 144978 times)