Pages:
Author

Topic: Bitmain Launches the New Antminer B3 Miner - page 7. (Read 16339 times)

member
Activity: 434
Merit: 52
Lots of ways around that limit of 1 - they dont check very deeply. I was able to order 2 in two different accounts shipping to the same address

Plus if you're not ordering dozens it'd be really hard to verify anyway, as how do they know your roommate didn't also order one? Not advocating, just saying it was 1 per account, not household.
newbie
Activity: 43
Merit: 0
in which exchange i can trade my bytom coins  from my bytom wallet? just gate.io?

https://coinmarketcap.com/currencies/bytom/#markets
I think, he asked about coins in desktop wallet (not erc20 tokens).
I also have a question - how to transfer coins from bytom desktop wallet to exchange or backwards?
member
Activity: 434
Merit: 52
Grabbed one a few hours before they sold out.  My only worry is that it's for one coin and one coin only.  So long as that coin doesn't flop, I imagine ROI won't be tough with such a low power consumption.

Just fyi, as this is an identical post to at least one other, and considering how long ago the first batch sold out, this post has been reported. If you are a genuine community member, I do apologize and contact the admins and let them know.
newbie
Activity: 34
Merit: 0
How in one day from 15k of b3 miners can go up to 29k what's going on ? http://miningpoolstats.stream/bytom

It could be the second batch which they are testing, or a strange amount of GPUs starting to mine
newbie
Activity: 35
Merit: 0
in which exchange i can trade my bytom coins  from my bytom wallet? just gate.io?

https://coinmarketcap.com/currencies/bytom/#markets
newbie
Activity: 54
Merit: 0
in which exchange i can trade my bytom coins  from my bytom wallet? just gate.io?
copper member
Activity: 112
Merit: 8
Guys,
I downloaded mainet wallet and update my antpool acount adress with mainet wallet address for Bytom. Antpool shows that bytoms were paid but paid bytoms didn't reflect in my bytom wallet on my desktop. Does anyone has that kind of problem Huh please need help. Thanks

P.S. it didn't syncronized completely yet.

"it didn't syncronized completely yet."

This is your answer
newbie
Activity: 35
Merit: 0
How in one day from 15k of b3 miners can go up to 29k what's going on ? http://miningpoolstats.stream/bytom
newbie
Activity: 31
Merit: 0
Guys,
I downloaded mainet wallet and update my antpool acount adress with mainet wallet address for Bytom. Antpool shows that bytoms were paid but paid bytoms didn't reflect in my bytom wallet on my desktop. Does anyone has that kind of problem Huh please need help. Thanks

P.S. it didn't syncronized completely yet.
full member
Activity: 227
Merit: 100
How can I verify that my update went smoothly? I did the first upgrade with the Antminer-B3-2018-****.tar.gz and got a success message. Then I did the update_1000.tar.gz but it never finishes. Page just stays "Upload firmware image..." for over 10 minutes.

Anybody experience something similar?



I experienced the same thing when trying to update the firmware from a desktop that was on a wireless network. I switched to wired network and it worked. For 1 out of 4 B3s I own, I had to update the firmware couples time to get over 1k hash.

How do you got 4 B3s? The limit was just 1/order... do you used your family infos or something?

You can use different email addresses with same physical location as long as you can verify the account with it's own phone #(SMS). Bitmain doesn't care, or care to verify.  

Yep... they could not prevent that, since it could be different people living in the same place.
hero member
Activity: 895
Merit: 504
How can I verify that my update went smoothly? I did the first upgrade with the Antminer-B3-2018-****.tar.gz and got a success message. Then I did the update_1000.tar.gz but it never finishes. Page just stays "Upload firmware image..." for over 10 minutes.

Anybody experience something similar?



I experienced the same thing when trying to update the firmware from a desktop that was on a wireless network. I switched to wired network and it worked. For 1 out of 4 B3s I own, I had to update the firmware couples time to get over 1k hash.

How do you got 4 B3s? The limit was just 1/order... do you used your family infos or something?

You can use different email addresses with same physical location as long as you can verify the account with it's own phone #(SMS). Bitmain doesn't care, or care to verify. 
full member
Activity: 227
Merit: 100
And later who does that to cheat about the limit complains of bitmain by anti-ethical practices Lips sealed
newbie
Activity: 19
Merit: 0
Lots of ways around that limit of 1 - they dont check very deeply. I was able to order 2 in two different accounts shipping to the same address
full member
Activity: 227
Merit: 100
How can I verify that my update went smoothly? I did the first upgrade with the Antminer-B3-2018-****.tar.gz and got a success message. Then I did the update_1000.tar.gz but it never finishes. Page just stays "Upload firmware image..." for over 10 minutes.

Anybody experience something similar?



I experienced the same thing when trying to update the firmware from a desktop that was on a wireless network. I switched to wired network and it worked. For 1 out of 4 B3s I own, I had to update the firmware couples time to get over 1k hash.

How do you got 4 B3s? The limit was just 1/order... do you used your family infos or something?
hero member
Activity: 895
Merit: 504
How can I verify that my update went smoothly? I did the first upgrade with the Antminer-B3-2018-****.tar.gz and got a success message. Then I did the update_1000.tar.gz but it never finishes. Page just stays "Upload firmware image..." for over 10 minutes.

Anybody experience something similar?



I experienced the same thing when trying to update the firmware from a desktop that was on a wireless network. I switched to wired network and it worked. For 1 out of 4 B3s I own, I had to update the firmware couples time to get over 1k hash.
newbie
Activity: 9
Merit: 0
How can I verify that my update went smoothly? I did the first upgrade with the Antminer-B3-2018-****.tar.gz and got a success message. Then I did the update_1000.tar.gz but it never finishes. Page just stays "Upload firmware image..." for over 10 minutes.

Anybody experience something similar?

sr. member
Activity: 737
Merit: 262
Me, Myself & I

Sorry to sound like a brick, but that's exactly the reason why people that first read have allways an advantage. I mean who the hell is sending whatever currency to an exchange without checking first everything, including a small test transaction??

First thing on a new exchange is allways to check the rulews, withdraw fees and restrictions, easy as that.

No, You sound like everyone's general after the battle - yeah, sure,... with the Bytom there were plenty of exchanges to choose from for making simple ECRtoken -> mainnet swap...
Bytom launch was fuzzy as much as possible and still going in same manner.
member
Activity: 420
Merit: 13
Thanks for the heads up but what a fucking nightmare.  Just barely sent about 400 BTM to gate.io cause it seemed legit to trade and now that I'm trying to withdraw it's just one hassle after another.  Need SMS support, needs KYC, on and on!  Withdrawl disabled for 24 hours "for your security".  WTF.  Just give me my fucking coins back....

Yeah, it's a mazo-experience filling expiring SMS code and 2FA I switched on thinking on replacing from time to time SMS codes with it. And now KYC "in 2 days". It's even worse with mobile application.

Well, I was able to submit a successfull withdrawl transaction, what a feat.  I'm super stoked about some random Chinese company having a picture of my passport though, and it only cost me ~$6 to do absolutley nothing. 

Sorry to sound like a brick, but that's exactly the reason why people that first read have allways an advantage. I mean who the hell is sending whatever currency to an exchange without checking first everything, including a small test transaction??

First thing on a new exchange is allways to check the rulews, withdraw fees and restrictions, easy as that.
full member
Activity: 207
Merit: 112
Thanks for the heads up but what a fucking nightmare.  Just barely sent about 400 BTM to gate.io cause it seemed legit to trade and now that I'm trying to withdraw it's just one hassle after another.  Need SMS support, needs KYC, on and on!  Withdrawl disabled for 24 hours "for your security".  WTF.  Just give me my fucking coins back....

Yeah, it's a mazo-experience filling expiring SMS code and 2FA I switched on thinking on replacing from time to time SMS codes with it. And now KYC "in 2 days". It's even worse with mobile application.

Well, I was able to submit a successfull withdrawl transaction, what a feat.  I'm super stoked about some random Chinese company having a picture of my passport though, and it only cost me ~$6 to do absolutley nothing. 

You have my sympathy, but sometimes when I read about these issues, I can’t help but think how far we’ve actually come.
Ask me about my MTGOX account.  Cheesy
newbie
Activity: 35
Merit: 0
I am having the same issue. Let's hope they will do right by us.

The same here 😠
Pages:
Jump to: