Pages:
Author

Topic: Bitmain Launches the New Antminer B3 Miner - page 9. (Read 16291 times)

sr. member
Activity: 966
Merit: 275
I will like to know more about this bitminer and antminer stuff. Have been ignoring them thinking it was all a joke

Well, I think you should visit amazon.com (or ebay perhaps, not sure) as there were stockpiles of Bitmain AntMiner. It's the most effective way to mine Bitcoin, Litecoin, Ethereum, and other cryptocurrencies today.

newbie
Activity: 35
Merit: 0
Guys did you try overclocking B3 or rewrite  last firmware to squeeze more from it ?
copper member
Activity: 112
Merit: 8
Profit drop to around 220 a month here? Wat happened? I thought they stop selling? 7-8 months to break even?

It's 405 BTM a month at Antpool. GPU miners are joining in I guess. They will mine BTM as long as it's profitable.
full member
Activity: 462
Merit: 118
Profit drop to around 220 a month here? Wat happened? I thought they stop selling? 7-8 months to break even?
newbie
Activity: 34
Merit: 0
Gate.io have Bytom mainnet wallet & exchange live. 10% discount on trading fees when using this link - https://gate.io/ref/1600591

Have you successfully send BTM from your official bytom wallet to gate.io?  I'm trying to create a new "transaction" and getting all kinds of error messages.  Seems pretty straight forward but it isn't working. 

Yeah worked for me perfectly, do you want to post a screenshot of the error
hero member
Activity: 1498
Merit: 597
Updated to the newest firmware , B3 pulling 410 watts



In the past 7 hours after firmware update is hashing 1054H/s avg



Pool side hashrate reporting avg 1120H/s


newbie
Activity: 11
Merit: 0
Power for 1k --->  380W

I have lowered my fans to 70% and get 360W

How did you accomplish this?  There's no fan controller in the ant miner settings...
newbie
Activity: 34
Merit: 0
Power for 1k --->  380W

I have lowered my fans to 70% and get 360W
newbie
Activity: 2
Merit: 0
Power for 1k --->  380W
newbie
Activity: 12
Merit: 5
Upgraded my B3 using the new firmware and now getting 1000+ H/s as well Smiley
Can you tell me how much power is consuming for 1KH/s?
member
Activity: 420
Merit: 13
When is Bitmain gonna release the overclocking firmware for us  Huh

It's been out for some days allready:
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions

I think he means where we can access the frequency. Like with other antminers, this update only increased the hashrate

maybe, not sure what is in his mind. But he asked for the "overclocking firmware" which at least now he has a link for.
newbie
Activity: 34
Merit: 0
When is Bitmain gonna release the overclocking firmware for us  Huh

It's been out for some days allready:
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions

I think he means where we can access the frequency. Like with other antminers, this update only increased the hashrate
member
Activity: 420
Merit: 13
When is Bitmain gonna release the overclocking firmware for us  Huh

It's been out for some days allready:
https://support.bitmain.com/hc/en-us/articles/360004733393-B3-Firmware-Upgrade-Instructions
newbie
Activity: 54
Merit: 0
Anyone else not able to connect to antpool after the update? All my payments have been marked "paying" for a couple days now, I'm patient there, but since yesterday afternoon the pool is reporting I am not connected, while the B3 has been happily mining away at 1mh the whole time, reporting no errors...

EDIT: solved, perhaps. One of two things was required:

rebooting the miner a second time after the second update
deleting the password line (I had previous left the default "123" and had no problem, or one of the upgrades had added it, I honestly don't remember)

So if anyone else encounters this problem, I suggest multiple reboots and making sure the upgrades didn't change your settings in any way and/or your password field is accurate or blank. I do wish I had done one at a time so I would know which was the problem, and would play around to figure it out but I lost 15 hours of mining so I'm not touching a damn thing. Wink

which exchange supports the BTM mainet wallet?
newbie
Activity: 6
Merit: 0
When is Bitmain gonna release the overclocking firmware for us  Huh
newbie
Activity: 7
Merit: 8
I got my Bytom today, was worried too but once the wallet is fully synced then your deposit should appear. 

Anyone know where there is an exchange that is trading the bytom mainnet tokens?
newbie
Activity: 9
Merit: 0
The miner doesnt get any further than the "startup" fase. Fans running slow and i think the miner does not get online. Therefore i cant find the ip.. any tips/tricks?

Try resetting - https://enforum.bitmain.com/bbs/topics/3957

yep, this should be the next step. Take a pin or needle and hold it as long into the "Reset-Button/Hole" (without much force!) until you hear the beep and see the red light. This should reset the Miner to factory settings. However, in case you have disrupted the upgrade process with unplugging it i'am not sure if this might be enough.... Hope so. Let us kow what happened and how things worked out.
Tried to reset the miner but it didnt work, holding the reset-button for about a whole minute doesnt do anything. It doesnt respond and stays in the warming-up fase..
Do you have another solution?

Read this and locate your error.
https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-?mobile_site=true&page=8

I readed a bit into it and think this is for  you:
 https://enforum.bitmain.com/bbs/topics/2891

and a video about it from the bitmain support forum:
http://v.youku.com/v_show/id_XMTU0MDUwNTkzMg==.html?from=y1.7-1.2

Seems you have to manually flash your SD card.

Thanks for your help! I had contact with Bitmain and they told me that the control board is defective so they send me a new control board.
However it is strange that it happend during the upgrade, it probably has something to do with it..
jr. member
Activity: 94
Merit: 2
Instead of clicking the link when on a MAC using Safari. "Right" click and choose Download Linked File, that will download the file keeping it as a .gz and it will not automatically uncompress it. Then choose the .gz version of the firmware and all will be fine.
member
Activity: 147
Merit: 10
at first they were paying 1 or 2 more per day --- but since ant pool has been paying and the upgrade ---- things seems to have changed .....    try both and then see how u feel ---

or once i have the firmware working I will let you know how many per 24 hours !

then we can judge from each other which is working better ?>




any advice or help for a down miner who is spending too much time on this firmware update ??

nothing but error right away pretty much -- using files from bitmain -
tried on google chrome after safari did not work ?

not sure what else in could be ?

its a tar file and a MAC ... should it be a TAR.GZ ?           or am I maybe missing something --

ive had nothing but good luck with all other miners and firmware - but this one is giving errors ?

thx for any help

bless


error starts like this  Huh
"
Incorrect firmware!!!
Content-type: text/html