Bitmain launches the Z9 Equihash miner - page 6.

ezeiza

newbie

Activity: 28

Merit: 1

Quote from: efudd on September 20, 2018, 07:06:19 PM

Quote from: ezeiza on September 20, 2018, 05:31:36 PM

Quote from: efudd on September 20, 2018, 04:35:17 PM

Quote from: fccs on September 20, 2018, 03:45:28 PM

Turbo mode is 550m and runs about 48-50KH solid avg after running multiple z9's for 3 hours. I feel like if we can push these to 600 or 650m we def. have a solid 60kh miner on hands. The inspect element does not work as I just tried it on mine as well.

Try editing the config file?

My UPS ones are delayed, again. :/
DHL arrives tomorrow, in theory.

I can try it now if you can explain me in details how to or show me a link with explanation

ssh to miner.
edit /config/cgminer.conf
see bitmain-freq in config file, change value.
save file.
"/etc/init.d/cgminer.sh restart"

see: https://bitcointalksearch.org/topic/how-to-automatically-adjust-antminer-frequency-and-fan-speeds-on-a-schedule-2056032

-j

Maybe i'm dumb but cannot ssh- it's telling me access denied.

efudd

member

Activity: 504

Merit: 51

Quote from: ezeiza on September 20, 2018, 05:31:36 PM

Quote from: efudd on September 20, 2018, 04:35:17 PM

Quote from: fccs on September 20, 2018, 03:45:28 PM

Turbo mode is 550m and runs about 48-50KH solid avg after running multiple z9's for 3 hours. I feel like if we can push these to 600 or 650m we def. have a solid 60kh miner on hands. The inspect element does not work as I just tried it on mine as well.

Try editing the config file?

My UPS ones are delayed, again. :/
DHL arrives tomorrow, in theory.

I can try it now if you can explain me in details how to or show me a link with explanation

ssh to miner.
edit /config/cgminer.conf
see bitmain-freq in config file, change value.
save file.
"/etc/init.d/cgminer.sh restart"

see: https://bitcointalksearch.org/topic/how-to-automatically-adjust-antminer-frequency-and-fan-speeds-on-a-schedule-2056032

-j

badbart

member

Activity: 449

Merit: 24

Mines still in China!

henzhen, China 09/21/2018 1:59 A.M. A mechanical failure has delayed delivery. We're adjusting plans to deliver your package as quickly as possible. / Delivery will be rescheduled.

ezeiza

newbie

Activity: 28

Merit: 1

Quote from: efudd on September 20, 2018, 04:35:17 PM

Quote from: fccs on September 20, 2018, 03:45:28 PM

Turbo mode is 550m and runs about 48-50KH solid avg after running multiple z9's for 3 hours. I feel like if we can push these to 600 or 650m we def. have a solid 60kh miner on hands. The inspect element does not work as I just tried it on mine as well.

Try editing the config file?

My UPS ones are delayed, again. :/
DHL arrives tomorrow, in theory.

I can try it now if you can explain me in details how to or show me a link with explanation

efudd

member

Activity: 504

Merit: 51

Quote from: fccs on September 20, 2018, 03:45:28 PM

Turbo mode is 550m and runs about 48-50KH solid avg after running multiple z9's for 3 hours. I feel like if we can push these to 600 or 650m we def. have a solid 60kh miner on hands. The inspect element does not work as I just tried it on mine as well.

Try editing the config file?

My UPS ones are delayed, again. :/
DHL arrives tomorrow, in theory.

fccs

member

Activity: 356

Merit: 47

Turbo mode is 550m and runs about 48-50KH solid avg after running multiple z9's for 3 hours. I feel like if we can push these to 600 or 650m we def. have a solid 60kh miner on hands. The inspect element does not work as I just tried it on mine as well.

yrk1957

member

Activity: 531

Merit: 29

Quote from: ut_target on September 20, 2018, 02:35:34 PM

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

I'm very skeptical we'll be able to overclock these, reason being there are 3 hashboards, not 4 (maybe I'm the only one who presumed that it'd be 4, given it was 4 times the speed of a Mini?), and each of these boards is running about 15 KSols/s. In effect, I think we're dealing with the equivalent of three overclocked Z9 Minis in one box, so there's no where to go. Obviously I could be way off (I'd prefer that, actually) but so far, I'm not hopeful.

It has same chip count as 4 Mini’s, and reportedly runs at 500, so definitely not 3 oc’ed mini’s.

ut_target

newbie

Activity: 2

Merit: 0

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

I'm very skeptical we'll be able to overclock these, reason being there are 3 hashboards, not 4 (maybe I'm the only one who presumed that it'd be 4, given it was 4 times the speed of a Mini?), and each of these boards is running about 15 KSols/s. In effect, I think we're dealing with the equivalent of three overclocked Z9 Minis in one box, so there's no where to go. Obviously I could be way off (I'd prefer that, actually) but so far, I'm not hopeful.

jcandle

newbie

Activity: 1

Merit: 0

Quote from: efudd on September 20, 2018, 06:50:46 AM

DHL shipment: The import duty/tax due on your shipment is USD 36.67.

.... vs $950 /each on UPS.

Meh.

-j

Except not. Seems to be hit and miss based on what is reported here. I just got hit for $919/ea from DHL.

I bought it personally; not through a business name. Not sure if its any better if you buy from a reseller instead of direct.

d.v.

jr. member

Activity: 48

Merit: 4

Quote from: ezeiza on September 20, 2018, 03:01:50 AM

Does anyone tried to flash the Z9 big with the Z9 mini May FW

this is a big risk cause u can brick your Z9 and no way to go back. i'm not sure if there is a recovery method with the sd card for the Z9?

crypto_buffa

newbie

Activity: 9

Merit: 1

Quote from: efudd on September 20, 2018, 06:50:46 AM

DHL shipment: The import duty/tax due on your shipment is USD 36.67.

.... vs $950 /each on UPS.

Meh.

-j

Whoa! That's a really awful tariff

Not sure what I'm going to be hit with here in Canada, on the 2 Innosilicon A9s I bought back in early July it was about CAD$700, hoping it's about the same with the Z9s

efudd

member

Activity: 504

Merit: 51

DHL shipment: The import duty/tax due on your shipment is USD 36.67.

.... vs $950 /each on UPS.

Meh.

-j

ezeiza

newbie

Activity: 28

Merit: 1

Quote from: fccs on September 19, 2018, 10:10:35 PM

Quote from: efudd on September 19, 2018, 10:09:29 PM

Quote from: fccs on September 19, 2018, 10:06:01 PM

Quote from: efudd on September 19, 2018, 09:52:14 PM

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

Mine got delayed due to "equipment failure" -- did yours actually arrive and can you confirm this? Or are you basing this on the fact that they have a 550Mhz image available for download?

-j

Mine arrive tomorrow, friend already has his so I can confirm. 500 is "balance" mode, 550 is "turbo" mode. I have heard that people were getting close to 50kh in the discord I am in, but my friend gets around 44-46kh in turbo mode and very quiet meaning the damn miner isn't even trying. This miner should be able to do at least 600-650m but we need to figure out how to actually overclock to that. Also, the inspect element trick does not seem to work and no firmware other than what it has to try so we gotta figure out another way unless we do actual editing of the cfg file.

I was using the config file with my batch1 minis. I'd give that a shot. I'm also curious about the hash boards and how they compare to batch1 and batch2+.

-j

I will research into how to edit the cfg file then. I'm not sure if it's any different on these vs mini

Does anyone tried to flash the Z9 big with the Z9 mini May FW

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Be proud if it's loud. Unless your wife or neighbors complain.

fccs

member

Activity: 356

Merit: 47

Quote from: Biodom on September 19, 2018, 10:16:37 PM

They have some made up shit about mechanical failure.
it's most likely bogus.

That said, I want to get paid for further delays...in cash, not stupid coupons.
$23/day per each machine, effective from 9/15 (when they claimed that they "shipped").

Don't they or UPS have insurance?

It was very hard for them to ship these I know it's something with the underclock. These are way more power house miners than they look and we need to figure out what it clocks to.

Biodom

legendary

Activity: 3892

Merit: 4331

They have some made up shit about mechanical failure.
it's most likely bogus.

That said, I want to get paid for further delays...in cash, not stupid coupons.
$23/day per each machine, effective from 9/15 (when they claimed that they "shipped").

Don't they or UPS have insurance?

fccs

member

Activity: 356

Merit: 47

Quote from: efudd on September 19, 2018, 10:09:29 PM

Quote from: fccs on September 19, 2018, 10:06:01 PM

Quote from: efudd on September 19, 2018, 09:52:14 PM

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

Mine got delayed due to "equipment failure" -- did yours actually arrive and can you confirm this? Or are you basing this on the fact that they have a 550Mhz image available for download?

-j

Mine arrive tomorrow, friend already has his so I can confirm. 500 is "balance" mode, 550 is "turbo" mode. I have heard that people were getting close to 50kh in the discord I am in, but my friend gets around 44-46kh in turbo mode and very quiet meaning the damn miner isn't even trying. This miner should be able to do at least 600-650m but we need to figure out how to actually overclock to that. Also, the inspect element trick does not seem to work and no firmware other than what it has to try so we gotta figure out another way unless we do actual editing of the cfg file.

I was using the config file with my batch1 minis. I'd give that a shot. I'm also curious about the hash boards and how they compare to batch1 and batch2+.

-j

I will research into how to edit the cfg file then. I'm not sure if it's any different on these vs mini

efudd

member

Activity: 504

Merit: 51

Quote from: fccs on September 19, 2018, 10:06:01 PM

Quote from: efudd on September 19, 2018, 09:52:14 PM

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

Mine got delayed due to "equipment failure" -- did yours actually arrive and can you confirm this? Or are you basing this on the fact that they have a 550Mhz image available for download?

-j

Mine arrive tomorrow, friend already has his so I can confirm. 500 is "balance" mode, 550 is "turbo" mode. I have heard that people were getting close to 50kh in the discord I am in, but my friend gets around 44-46kh in turbo mode and very quiet meaning the damn miner isn't even trying. This miner should be able to do at least 600-650m but we need to figure out how to actually overclock to that. Also, the inspect element trick does not seem to work and no firmware other than what it has to try so we gotta figure out another way unless we do actual editing of the cfg file.

I was using the config file with my batch1 minis. I'd give that a shot. I'm also curious about the hash boards and how they compare to batch1 and batch2+.

-j

fccs

member

Activity: 356

Merit: 47

Quote from: efudd on September 19, 2018, 09:52:14 PM

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

Mine got delayed due to "equipment failure" -- did yours actually arrive and can you confirm this? Or are you basing this on the fact that they have a 550Mhz image available for download?

-j

Mine arrive tomorrow, friend already has his so I can confirm. 500 is "balance" mode, 550 is "turbo" mode. I have heard that people were getting close to 50kh in the discord I am in, but my friend gets around 44-46kh in turbo mode and very quiet meaning the damn miner isn't even trying. This miner should be able to do at least 600-650m but we need to figure out how to actually overclock to that. Also, the inspect element trick does not seem to work and no firmware other than what it has to try so we gotta figure out another way unless we do actual editing of the cfg file.

efudd

member

Activity: 504

Merit: 51

Quote from: fccs on September 19, 2018, 08:57:29 PM

Z9's are showing up now. So.. anyone know how to overclock of if these can be? The max they run is 550m. I wanna see them at 650m

Mine got delayed due to "equipment failure" -- did yours actually arrive and can you confirm this? Or are you basing this on the fact that they have a 550Mhz image available for download?

-j

Topic: Bitmain launches the Z9 Equihash miner - page 6. (Read 37211 times)