Pages:
Author

Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 14. (Read 299686 times)

member
Activity: 93
Merit: 10
At starpool.biz make ~0.0125DASH/Day with 15.5GH/s average speed @750W. In EUR that is ~10 Euro/Day atm.
full member
Activity: 362
Merit: 102
member
Activity: 140
Merit: 17
am debating if I should keep my 4 D3s or sell them.

Any advise?
I was wondering the same, even put it for sale but then pulled it. I bought my D3 on ebay for $850, but still. I don't know your electricity rate, for me it's still profitable. Dash difficulty seems to have leveled and I see no X11 miners coming in the future (who would buy them?). So I guess it's a lowish risk boring slow income producer.
full member
Activity: 362
Merit: 102
full member
Activity: 500
Merit: 105
am debating if I should keep my 4 D3s or sell them.

Any advise?
newbie
Activity: 51
Merit: 0
Got a question.

Is there full guide where is written what all miners stats mean like LocalWork Utility WU BestShare HW and what shod be Temp for PCB and Chip???

I have no idea, but i am very interested in this as well.  I have been asking what are the ideal values for each section and i have never found a good answer or even what each section means.

Please let me know if you find out.
member
Activity: 117
Merit: 14
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

On ViaBTC I've been getting 0.0085-0.009 DASH per day this week, which is $9 or more. Try that.

This is for 2 D3's (19.3 GH/s):

https://imgur.com/a/QE163
newbie
Activity: 74
Merit: 0
Got a question.

Is there full guide where is written what all miners stats mean like LocalWork Utility WU BestShare HW and what shod be Temp for PCB and Chip???
member
Activity: 99
Merit: 11
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

I like prohashing.com/



I went back to www.litecoinpool.org because prohashing is now telling folk to do a 1099 to the IRS (USA)... I don't have a problem with IRS ..I'm legal

but went thru an issue with the bank saying I was evil (2013 ...all BTC was evil..thus bank contacted SEC on me for such) so what I suspect will happen with prohashing's

1099 is what happened with coinbase being the first to try an be legal...same as SEC..they will be able to do a blanket 'source of funds' letter to all on prohashing members

that you and your CPA can trudge thru to prove you are legal....I prefer the IRS find me with others in a random audit not be singled out by a site sending out

1099's that according to my CPA are not even needed (I am not employed by prohashing nor a contractor...nor like in coinbase's case exchange $$$ for crypto etc)

So went thru it once, don't need the IRS getting lazy and just shooting them out to all users of prohashing based on 1099's their own 'source of funds' mass letters.

So I split....again, CPA said as far as they can tell, prohashing is simply doing this to make them feel better or they have bad lawyer advice...I myself think it is gonna

bite prohashing in the ass, much like my bank got reemed after the fiasco with me (I was the only one, who came out, smelling fine in that mess, and obviously i've

changed banks since) 1x was enough then you on a 'source of funds letter' Sad



Excellent observations. I think the reporting floor is $600 for 1099 so when I start to get close to those earnings I will probably move away from that pool.

The crypto ecosystem definitely needs better support for professional mining operations that are incorporated. Pools and exchanges need to deal with us on corp-to-corp level. Let's start another thread or create a resource. I would like to gain from your knowledge.

full member
Activity: 362
Merit: 102
I'm buying D3s in America, hit me up.
full member
Activity: 500
Merit: 105
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

I like prohashing.com/


i like supernova.cc
copper member
Activity: 2898
Merit: 1465
Clueless!
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

I like prohashing.com/



I went back to www.litecoinpool.org because prohashing is now telling folk to do a 1099 to the IRS (USA)... I don't have a problem with IRS ..I'm legal

but went thru an issue with the bank saying I was evil (2013 ...all BTC was evil..thus bank contacted SEC on me for such) so what I suspect will happen with prohashing's

1099 is what happened with coinbase being the first to try an be legal...same as SEC..they will be able to do a blanket 'source of funds' letter to all on prohashing members

that you and your CPA can trudge thru to prove you are legal....I prefer the IRS find me with others in a random audit not be singled out by a site sending out

1099's that according to my CPA are not even needed (I am not employed by prohashing nor a contractor...nor like in coinbase's case exchange $$$ for crypto etc)

So went thru it once, don't need the IRS getting lazy and just shooting them out to all users of prohashing based on 1099's their own 'source of funds' mass letters.

So I split....again, CPA said as far as they can tell, prohashing is simply doing this to make them feel better or they have bad lawyer advice...I myself think it is gonna

bite prohashing in the ass, much like my bank got reemed after the fiasco with me (I was the only one, who came out, smelling fine in that mess, and obviously i've

changed banks since) 1x was enough then you on a 'source of funds letter' Sad

legendary
Activity: 1190
Merit: 1000
no need to carry heavy money bags anymore
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

I like prohashing.com/


I like them as well. Fees are high but it's effortless for customers so IMO relevant.
In addition pointed the miner through miningrentls ( I set twice the regular pricing but still got rented few times ... so I'm satisfied). My backup pool is miningpoolhub.
member
Activity: 99
Merit: 11
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs

I like prohashing.com/
full member
Activity: 217
Merit: 101
I'm getting around 7 USD a day through zpool, what's a good pool to use these days? Granatgas is back up but only does btc payouts, too expensive for txs
sr. member
Activity: 420
Merit: 250
Tax Attorney - Investor - Entrepreneur
Hello,

is anyone facing my problem.

One of the D3 is hashing properly however there is 1 missing hashing board from the interface.
the total hashing power is correct though.

any advise?

thanks.


Try restarting it. If the hasrate in the miner interface as well as on your pool (more important) is correct I would not stress to much about it. Just keep an eye on it if this changes

I did that multiple times, hashrate on the pool and miner is correct but seems to be a lot of hardware errors.




Very strange. But I cant help you. I would write bitmain and ask them whats wrong. As long as your HR on the pool is correct you got time for bitmain to reply even if its a couple days
sr. member
Activity: 420
Merit: 250
Tax Attorney - Investor - Entrepreneur
Hello,

is anyone facing my problem.

One of the D3 is hashing properly however there is 1 missing hashing board from the interface.
the total hashing power is correct though.

any advise?

thanks.


Try restarting it. If the hasrate in the miner interface as well as on your pool (more important) is correct I would not stress to much about it. Just keep an eye on it if this changes
full member
Activity: 500
Merit: 105
Hello,

is anyone facing my problem.

One of the D3 is hashing properly however there is 1 missing hashing board from the interface.
the total hashing power is correct though.

any advise?

thanks.
full member
Activity: 362
Merit: 102
If anyone in the US has D3s to sell, please contact me with your price.
full member
Activity: 280
Merit: 100
Anyone know where I can download previous versions of the D3 firmware? I only started noticing problems when I upgraded to the latest November version.

Also, has anyone here had success replacing defective hashboards through Bitmain? I e-mailed one of the reps and they pointed me to this website, https://shop.bitmain.com/user/repairHeader.htm. When I go to that site it asks me to provide a carrier/tracking number. Am I supposed to just send the hashboards back without getting prior approval? I thought I needed approval from Bitmain to open the machines up and take the hashboards out? Or do I just send them out and fill out the repair ticket form after?

Any help would be much appreciated!


I sent without any approval. Just fill the form online. Enter any number (I usually enter the date in the format 20180107) instead of a tracking before you ship it and then just go back to the form and edit it with a tracking number.

Nice, appreciate it. How long did it take for you to get the replacement hashboards?

Pretty fast, around 10 days.

Pages:
Jump to: