Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 160.

Albortz

sr. member

Activity: 420

Merit: 250

Tax Attorney - Investor - Entrepreneur

Quote from: VoskCoin on September 26, 2017, 09:46:13 AM

Quote from: longpia on September 26, 2017, 09:32:19 AM

Quote from: willywonkaaa on September 26, 2017, 08:12:28 AM

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

If current daily profit for d3 is $40 still very good return, but if too many X11 miners in the market might really distribute profits equally with higher difficulty. Let's hope there are more potential coins to be mined by end of the year.

I see people say that ^ . . are there actually any x11 coins in the works or already out that are really worth anything?
Nothing that I'm aware aside from Dash obviously

profits dipped lower today
https://www.nicehash.com/miner/1ADjxn4jCV91izZJJtTR62UPfjw1PtsAZF

That looks kinda good. It pulling 0.05BTC is a good start. I wish my L3+ would make 0.01 lol

I'm very curious how this will change in the next days even tho I don't have a D3

KRYPTOCAT

newbie

Activity: 20

Merit: 0

Quote from: VoskCoin on September 26, 2017, 09:46:13 AM

Quote from: longpia on September 26, 2017, 09:32:19 AM

Quote from: willywonkaaa on September 26, 2017, 08:12:28 AM

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

If current daily profit for d3 is $40 still very good return, but if too many X11 miners in the market might really distribute profits equally with higher difficulty. Let's hope there are more potential coins to be mined by end of the year.

I see people say that ^ . . are there actually any x11 coins in the works or already out that are really worth anything?
Nothing that I'm aware aside from Dash obviously

profits dipped lower today
https://www.nicehash.com/miner/1ADjxn4jCV91izZJJtTR62UPfjw1PtsAZF

link not working ;/

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Quote from: longpia on September 26, 2017, 09:32:19 AM

Quote from: willywonkaaa on September 26, 2017, 08:12:28 AM

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

If current daily profit for d3 is $40 still very good return, but if too many X11 miners in the market might really distribute profits equally with higher difficulty. Let's hope there are more potential coins to be mined by end of the year.

I see people say that ^ . . are there actually any x11 coins in the works or already out that are really worth anything?
Nothing that I'm aware aside from Dash obviously

profits dipped lower today
https://www.nicehash.com/miner/1ADjxn4jCV91izZJJtTR62UPfjw1PtsAZF

longpia

newbie

Activity: 1

Merit: 0

Quote from: willywonkaaa on September 26, 2017, 08:12:28 AM

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

If current daily profit for d3 is $40 still very good return, but if too many X11 miners in the market might really distribute profits equally with higher difficulty. Let's hope there are more potential coins to be mined by end of the year.

ayoungtech

newbie

Activity: 53

Merit: 0

Quote from: willywonkaaa on September 26, 2017, 08:12:28 AM

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

`
Yea I understand that. I had an iBelink dm11g batch 1 that was pulling in ~$90-$100/day for the almost three weeks I had it. Don't have it anymore. Make money on both ends. But there are different strategies available to make a profit. Good luck to everyone in the community!

willywonkaaa

full member

Activity: 168

Merit: 100

Quote from: ayoungtech on September 26, 2017, 08:10:29 AM

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

theres a reason for that, current daily profits for d3 are 40 bucks RIGHT NOW.

Imagine the income in December when this huge batch gets delivered. You're looking at 5 dollars a day, good luck getting an ROI

ayoungtech

newbie

Activity: 53

Merit: 0

Late November batch of D3 currently available on bitmain.com and the website is actually responsive, it's a miracle!

micairvas

full member

Activity: 303

Merit: 105

I set frequency to 456m and fan to 70% on problematic D3 device, for now everything works fine - 16 ghs hashrate. What is max D3 fan speed, 4500 rpm?

sil2222

full member

Activity: 144

Merit: 100

Quote from: Bibi187 on September 26, 2017, 05:30:52 AM

Quote from: sil2222 on September 26, 2017, 05:23:40 AM

Quote from: micairvas on September 26, 2017, 05:05:34 AM

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged.
Make sure to monitor miner for a while after changing settings to make sure it has become stable.

Bitmain temp control, if you go to much on heat, miner will stop or crash. Rarely damaged, you have to push type of setting for long time ...

All my D3 is running with 50-60 PCB and 70-80 Chip temp, except one time of a board get crash, no problem at all Wink

And i reduce fan max speed at 53% ...

I will up frequency and fan speed when i finish sound isolation of this room, i living in this place lol

I don't know if temp control is enough to avoid damage to miner. A lot of L3+ owners had burnt out boards very quickly and L3+ are quiet and run cooler compared to D3. I always try to keep chips under 69C for longevity. when i was doing TV/PC repair I found that any Device running too hot shortens the life span of any device.

Bibi187

full member

Activity: 420

Merit: 106

https://steemit.com/@bibi187

Quote from: micairvas on September 26, 2017, 05:50:36 AM

Quote from: sil2222 on September 26, 2017, 05:23:40 AM

Quote from: micairvas on September 26, 2017, 05:05:34 AM

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged.
Make sure to monitor miner for a while after changing settings to make sure it has become stable.

My bad, I typed Chip temperatures instead of PCB...
Currently temperatures are fine for all miners. Chip temperatures are from 60-75c. PCB temperatures are around 55c.
I had 353433 HW errors on miner which making me problems.

What is max rpm 4500? You think I should decrease fq 456 and decrease fan to 70%? I can try, but temperatures are not problem here.

That can from your network setting, if you drop connection often ...

Do you check your kernel log ?

Copy / Paste end on this one here if you get any error return.

micairvas

full member

Activity: 303

Merit: 105

Quote from: sil2222 on September 26, 2017, 05:23:40 AM

Quote from: micairvas on September 26, 2017, 05:05:34 AM

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged.
Make sure to monitor miner for a while after changing settings to make sure it has become stable.

My bad, I typed Chip temperatures instead of PCB...
Currently temperatures are fine for all miners. Chip temperatures are from 60-75c. PCB temperatures are around 55c.
I had 353433 HW errors on miner which making me problems.

What is max rpm 4500? You think I should decrease fq 456 and decrease fan to 70%? I can try, but temperatures are not problem here.

Bibi187

full member

Activity: 420

Merit: 106

https://steemit.com/@bibi187

Quote from: sil2222 on September 26, 2017, 05:23:40 AM

Quote from: micairvas on September 26, 2017, 05:05:34 AM

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged.
Make sure to monitor miner for a while after changing settings to make sure it has become stable.

Bitmain temp control, if you go to much on heat, miner will stop or crash. Rarely damaged, you have to push type of setting for long time ...

All my D3 is running with 50-60 PCB and 70-80 Chip temp, except one time of a board get crash, no problem at all Wink

And i reduce fan max speed at 53% ...

I will up frequency and fan speed when i finish sound isolation of this room, i living in this place lol

sil2222

full member

Activity: 144

Merit: 100

Quote from: micairvas on September 26, 2017, 05:05:34 AM

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

75C is too hot. set your frequency to 456m and fan to 70% your miner will now hash at 16000 ghs ,but your temps will drop and error rate becomes almost 0. Also try moving miner to cooler area if possible. This should solve your problem unless its too late and board is damaged.
Make sure to monitor miner for a while after changing settings to make sure it has become stable.

Bibi187

full member

Activity: 420

Merit: 106

https://steemit.com/@bibi187

Quote from: Marvell2 on September 26, 2017, 12:55:51 AM

Quote from: Tssar on September 26, 2017, 12:53:49 AM

Quote from: GMPoison on September 26, 2017, 12:26:11 AM

"We are releasing new batches of the Antminer S9 and Antminer D3 DASH miner today (26 September)!
Antminer S9 will be available here (https://[Suspicious link removed]/L1VJPg) after 2PM
Antminer D3 will be available here (https://[Suspicious link removed]/wz4KNH) after 5PM today.
All times are in GMT+8.
BCC, BTC, LTC and USD will be accepted as payment methods for these batches."

profitability is going to be in cents or not in dollars mid Jan. Good luck for those who are going to purchase them

S9 is still a great buy

Rofl i miss this S9 selling ...

micairvas

full member

Activity: 303

Merit: 105

Quote from: zamans98 on September 26, 2017, 04:55:41 AM

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

Fan speed is around 4200rpm,for both fan, when hashboard is off status is xxxxxx. Pcb temperatures are 65-68-75c. I got 250 HW errors for few hours, to much Sad

.

zamans98

full member

Activity: 322

Merit: 100

Quote from: micairvas on September 26, 2017, 04:37:28 AM

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

check fan RPM __________??
check if the hashboard status is all zero or having XXXXX in any of it
check the temp on PCB __________?
check if HW error too much ______?

in my case, one of the heatsink fell off... i reattached it back. So far so good.
using 3M thermal tape.

micairvas

full member

Activity: 303

Merit: 105

One of my D3 miners lose connection with one board, and hash falls to 11 Ghs. I reconnected all psu connectors, checked them, but problem appears again. Anyone have suggestion how to solve this problem? This is my first Antminer which have problem. At starting miner work with all 3 boards, but after some time he lose 1 board.

zamans98

full member

Activity: 322

Merit: 100

Quote from: micairvas on September 26, 2017, 01:32:52 AM

Guys are you sure that Zpool is most profitable pool?
I connected D3-s on Zpool and for 14 hours, one D3 device (17 ghs) made 29,4 USD. That is lower than profit on regular Dash pool if we use coinwarz calculator?

yup, about right. its just 14 hours dude. Wait until 24 hours to get full picture.
some says X11 auto-switch pool, ZPool still the best

micairvas

full member

Activity: 303

Merit: 105

Guys are you sure that Zpool is most profitable pool?
I connected D3-s on Zpool and for 14 hours, one D3 device (17 ghs) made 29,4 USD. That is lower than profit on regular Dash pool if we use coinwarz calculator?

Ryancope123

sr. member

Activity: 277

Merit: 250

Quote from: Dopert on September 25, 2017, 04:17:03 PM

Pff. I think yesterday we did speculate and calculated bitmain batch sales numbers, a little to hard. People offer antminers d3 below cost price on ebay. I also adjusted mu price to costprice (1950 euro, inc PSU and all tax payed) on our Dutch marketplace Embarrassed

I hope that Bitmain suffer as hard as me with overflouding the Dash market.

Offer D3's below cost price ? not sure what you've been smoking but that isn't true unless its a scam 100% ... Most people resell the D3's at around 200-300% markups.

Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 160. (Read 299754 times)