Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 283. (Read 299688 times)
August 03, 2017, 09:50:04 AM
The so-called "2nd batch" was first batch left-overs (unpaid orders etc.).
August 03, 2017, 09:27:51 AM
3rd batch ive missed. 
how do you guys do it? Is anyone buying this for real to actually use? or is everyone just selling the pre-sale to a greater fool?
They sent me e-mail today. When was third batch? Today was second. : ) how do you guys do it? Is anyone buying this for real to actually use? or is everyone just selling the pre-sale to a greater fool? August 03, 2017, 09:25:52 AM
3rd batch ive missed. how do you guys do it? Is anyone buying this for real to actually use? or is everyone just selling the pre-sale to a greater fool?
how do you guys do it? Is anyone buying this for real to actually use? or is everyone just selling the pre-sale to a greater fool?Subscribe to their twitter account and get notified. The e-mail subscription is not consistent, they promise to add you but they don't always,
and the 2nd and 3rd batch were around the same time (one hour difference)
August 03, 2017, 09:16:31 AM
Is it possible to estimate DASH difficulty for October 2017?
Look up. Find a cloud. Estimate distance. Then triple it
Will be something like the above analogy.
Ugly,ugly indeed.
August 03, 2017, 09:05:42 AM
Is it possible to estimate DASH difficulty for October 2017?
August 03, 2017, 07:56:07 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in 
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out...
They will once they realize in their next batch all of their units will get sucked up by these people and no one pays. They will get tired of not being able to sell their hardware when they want to
+1 on that. This order scalping is out of control. I'd rather miss the boat and keep my coins than perpetuate this nonsense.
August 03, 2017, 07:50:17 AM
Tina possiblly a scammer using this email [email protected] so a gmail account is a red flag
she has real Bitmain links on her email message
does anyone no her from bitmain or is it a scammer?
Dear fan of Bitmain,
I'm Tina from sales team, Bitmain company.
I send email to say we open sell Antminer D3 right now.
The quantity is very low, maybe around 50 for all, so please check our website and order right now!
D3: https://shop.bitmain.com/productDetail.htm?pid=000201707201601357978QhCAWa5065C
You received this email because you are an user of Bitmain. So sorry if I bother you.
If the product out of stock let me know, maybe I can help in the next time!
Best,
Tina
--------
Beijing (Bitmain Headquarters)
Building 25, North Olympic Science & Technology Park,
Baosheng South Road, Haidian District, Beijing, China 100029.
Phone: +86-400 890 8855
Email:
[email protected]
[email protected] (for suppliers)
[email protected]（resume&job consulting）
she has real Bitmain links on her email message
does anyone no her from bitmain or is it a scammer?
Dear fan of Bitmain,
I'm Tina from sales team, Bitmain company.
I send email to say we open sell Antminer D3 right now.
The quantity is very low, maybe around 50 for all, so please check our website and order right now!
D3: https://shop.bitmain.com/productDetail.htm?pid=000201707201601357978QhCAWa5065C
You received this email because you are an user of Bitmain. So sorry if I bother you.
If the product out of stock let me know, maybe I can help in the next time!
Best,
Tina
--------
Beijing (Bitmain Headquarters)
Building 25, North Olympic Science & Technology Park,
Baosheng South Road, Haidian District, Beijing, China 100029.
Phone: +86-400 890 8855
Email:
[email protected]
[email protected] (for suppliers)
[email protected]（resume&job consulting）
August 03, 2017, 07:42:32 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out...
They will once they realize in their next batch all of their units will get sucked up by these people and no one pays. They will get tired of not being able to sell their hardware when they want to
August 03, 2017, 07:35:34 AM
hey guys I'm a bit confused.
I've ordered 1x D3+ PSU and paid via BTC directly after I got Bitmains' BTC address.
my current order status is "Paid" but also "Expired" ?
Does it mean I was to late? Don't know how I could pay faster lol
Conntacted the support already but wanted to know if anyone of you got the same issue.
In worst case I don't get the D3 miner will I receive my full BTC back from Bitmain?
Any experience with that?
I've ordered 1x D3+ PSU and paid via BTC directly after I got Bitmains' BTC address.
my current order status is "Paid" but also "Expired" ?
Does it mean I was to late? Don't know how I could pay faster lol
Conntacted the support already but wanted to know if anyone of you got the same issue.
In worst case I don't get the D3 miner will I receive my full BTC back from Bitmain?
Any experience with that?
i paid via LTC, based on the invoice the address is >> LdgWNbUrXaym73MXHh5noQ2SL1f4z9CjHj but cannot be found on the LTC explorer.
Already fired up 2 tickets to check. one from the exchange one to Bitmain
August 03, 2017, 07:33:13 AM
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now.
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
Here my set :
You can set a small room and split the room in two smaller room with a partial board and just keep small hole to place your miner.
The hot small room where the hot air flow out from the miner, you can set a fan to capture the heat and delivery to another place/room and you can control what room to be supply the heat if you can place many fan for each room.
The cool small room is where the cool airflow come in and keep the miner temp.
If you dont want split your room, you have to use many duck pipe and place to each miner to a central or bigger pipe which you can take the heat to somewhere else
August 03, 2017, 07:29:52 AM
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now. I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this? My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
Yes, the miners can be placed in any orientation you want without issue. As long as the airflow is not obstructed, you'll be good. I once used about 25 AntMiner S3s to heat my home through the winter and it worked great.
August 03, 2017, 07:26:44 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out...
August 03, 2017, 07:26:07 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
LOL.. i like this idea.
I start to worry if i bought this account and paid, they could get it back by any mean.
So, i cancel all my thought to buy one at the moment. Just wait another chance
August 03, 2017, 07:19:42 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
August 03, 2017, 07:07:04 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
You can always pay little bit more and buy "ready to pay" order...
https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
August 03, 2017, 06:58:34 AM
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now.
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
August 03, 2017, 06:55:52 AM
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
August 03, 2017, 06:34:51 AM
Or require a btc/credit card down payment, some sort of sign to show your not just some scrub looking to rake people and "hold" 50 units you dam well know they can afford anyway
August 03, 2017, 06:29:36 AM
Bitmain should lock one delivery address per account AFTER order has been made and not allow new user accounts to change phone number.
August 03, 2017, 06:25:38 AM
sold out already ! haha
I bought 3 but didnt even check the date they will be dispatched, what're peoples thoughts with regards to mining with these?
I am new to DASH, what's the best route, direct to mine DASH or use nice hash and convert to BTC.
Currently, have 1 l3+
I bought 3 but didnt even check the date they will be dispatched, what're peoples thoughts with regards to mining with these?
I am new to DASH, what's the best route, direct to mine DASH or use nice hash and convert to BTC.
Currently, have 1 l3+
Not sold out yet. so this batch is slowest to roll it seems, may be due to increase in difficulty, So does one month difference makes all the difference here?
Yes, they are sold-out now.
Why is it when I try to do this same deal 1 entire day prior to this guy I get called a scammer and he gets praised for being greedy and quick to pull the trigger exactly like I did? Wtf
what deal?
I think he mean this: https://bitcointalksearch.org/topic/wts-antminer-l3-with-psu-1st-november-pre-order-bitmain-2060485
Not quite sure what the guy meant? i have bought the 3 for me, direct from bitmain :S not selling them... ?
Jump to: