Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 43. (Read 299686 times)
November 27, 2017, 01:21:28 AM
Hi All, my D3 goes offline. It's hosted remotely so I can't really inspect it. Does anyone know if this is a common issue? I flashed it in early Nov., is there a new firmware out?
November 27, 2017, 12:12:36 AM
Does Bitmain always give out coupons, or is this a special case because of drop in profitability?
I remeber receiving Bitmain coupons since S3 era.
November 26, 2017, 11:43:47 PM
Yes, X11 is a composite of 11 algos, but the hardware is designed to give you the result after running through all those algos. You can't just tell the hardware to stop in the middle of computing and give you the results for a specific algo. ASIC's usually are optimized and made very efficient at doing 1 specific function, in this case x11. To add or do only a specific algo requires not only a firmware change, but now also a hardware change.
November 26, 2017, 11:10:31 PM
Definitely. But just reflash original firmware before warranty repair
November 26, 2017, 09:48:40 PM
Should I update all of my D3s to the latest firmware? I've downclocked all of them below 500 frequency. Some are still freaking out though. So I'm guessing I need to upgrade to latest firmware?
The Blissz aftermarket firmware is amazing, you can downclock the voltage and I still get 16 GH/s with 450 freq at the lowest voltage for 16 GH/s and quieter fans, 2500 - 3000 rpm. The 2 giving me trouble are doing 14 GH/s at 400 freq.
I'll definitely have to look into that. Can anyone else vouch for it? Does it void the warranty using it?
November 26, 2017, 07:51:09 PM
Does Bitmain always give out coupons, or is this a special case because of drop in profitability?
November 26, 2017, 06:25:50 PM
Should I update all of my D3s to the latest firmware? I've downclocked all of them below 500 frequency. Some are still freaking out though. So I'm guessing I need to upgrade to latest firmware?
The Blissz aftermarket firmware is amazing, you can downclock the voltage and I still get 16 GH/s with 450 freq at the lowest voltage for 16 GH/s and quieter fans, 2500 - 3000 rpm. The 2 giving me trouble are doing 14 GH/s at 400 freq.
November 26, 2017, 04:14:52 PM
Does any one want to sell their D3s and PSUs? I will pay $750 for both D3 and PSU.
November 26, 2017, 03:59:09 PM
Lol they are all already below 500. What are yalls downclocked to? I have these in my shop where it's cold. They are easily staying between 45 to 60 Celsius. They are all running off of 240v as well
Yes reflash the new firmware. It seems to help in most cases but still slow them down after the flash. November 26, 2017, 01:06:40 PM
Lol they are all already below 500. What are yalls downclocked to? I have these in my shop where it's cold. They are easily staying between 45 to 60 Celsius. They are all running off of 240v as well
November 26, 2017, 12:59:25 PM
Should I update all of my D3s to the latest firmware? I've downclocked all of them below 500 frequency. Some are still freaking out though. So I'm guessing I need to upgrade to latest firmware?
You need to DC again to below 500 until you cannot find any xxx in your D3 or temp at 75-85 C
November 26, 2017, 12:47:59 PM
Should I update all of my D3s to the latest firmware? I've downclocked all of them below 500 frequency. Some are still freaking out though. So I'm guessing I need to upgrade to latest firmware?
November 26, 2017, 11:13:01 AM
my 4x d3 and psu from this batch are now status "shipping"
November 26, 2017, 08:38:05 AM
also received the coupon... BUT my 1x D3 is still "not shipped" yet. What's wrong with that? Anyone also "Unshipped" status?
same here. 2x D3 21-30 nov batch Unshipped status
November 25, 2017, 10:45:45 PM
also received the coupon... BUT my 1x D3 is still "not shipped" yet. What's wrong with that? Anyone also "Unshipped" status?
Bitmain delaying shipments probably bc the network is already too packed.
November 25, 2017, 09:53:51 PM
also received the coupon... BUT my 1x D3 is still "not shipped" yet. What's wrong with that? Anyone also "Unshipped" status?
November 25, 2017, 08:10:07 PM
thats a pity..so only usable on their mining units and limited to 1 per purchase....what a cluster### but will take what i can get
November 25, 2017, 08:06:53 PM
No.
You can't unfortunately use the coupon to buy APW3++ power supply for free.
You can't unfortunately use the coupon to buy APW3++ power supply for free.
November 25, 2017, 07:41:29 PM
in theory each coupon can be used to purchase a single APW++@$105each....correct?
November 25, 2017, 07:39:42 PM
So you can only use 1 coupon or credit per order?
I seriously hope that's not the case as I got total of 6 coupons. Was going to wait until next gen to see if it's worth using them.
I seriously hope that's not the case as I got total of 6 coupons. Was going to wait until next gen to see if it's worth using them.
Jump to: