Topic: BITMAIN‘s Liquid Cooled Miner C1: It is not only cool, but it is cool - page 4. (Read 18320 times)
October 28, 2014, 03:03:58 AM
My kit arrive today, here is some foto what is in the box.
October 27, 2014, 10:16:36 PM
Anyone know how many watts the cooling system uses? I'm guessing around 30watts (around 15w for the pump and 3 fans at maybe 2w each on the low end). Wondering if it would be possible to run 2 C1's (840w) on 1 1600watt EVGA power supply with 2 water cooling kits even though it's a little over specs, anyone already try this? (70A each C1 plus water cooking kit x2 is more than the 133.3A 12v rating for the 1600w).
0.5A for pump,1.2A for fans,voltage is 12V,total watts is 20.4w. October 27, 2014, 10:09:46 PM
I ordered two C1s about a week ago, but they have not yet shipped. I pinged BitMainTech earlier this evening for an ETA; no response yet.
Also, although Syscooling.com sent an email with a DHL shipping number for the coolers, the DHL website says it is invalid and when I try to get the status of this order from the syscooling site, I get a 404 error.
On only a vaguely related note, has anyone used BTCrow to escrow BTC for private buy / sell transactions? I'm trying to sell seven of my S3s and the potential buyer wants to use this service. Thoughts? Thanks in advance for any advice.
well,just be patient,your informaition will be showed soon in DHL website.any question you could email us([email protected]). Also, although Syscooling.com sent an email with a DHL shipping number for the coolers, the DHL website says it is invalid and when I try to get the status of this order from the syscooling site, I get a 404 error.
On only a vaguely related note, has anyone used BTCrow to escrow BTC for private buy / sell transactions? I'm trying to sell seven of my S3s and the potential buyer wants to use this service. Thoughts? Thanks in advance for any advice.
October 27, 2014, 08:58:38 PM
Who needs cooling? Just use them to heat your home. 
Maybe,but your miner won't burn down. 
October 27, 2014, 08:55:04 PM
I was about to order but shipping is too expensive and brokerage fees by UPS will be expensive.
0.416 BTC ($146) for 2 units in Canada without brokerage fees.
Why are they not shipping with china post airmail? I'm sure shipping would be cheaper and brokerage fees would be handled by Canada Post for a lot less than UPS.
0.416 BTC ($146) for 2 units in Canada without brokerage fees.
Why are they not shipping with china post airmail? I'm sure shipping would be cheaper and brokerage fees would be handled by Canada Post for a lot less than UPS.
October 27, 2014, 07:19:12 PM
I ordered two C1s about a week ago, but they have not yet shipped. I pinged BitMainTech earlier this evening for an ETA; no response yet.
Also, although Syscooling.com sent an email with a DHL shipping number for the coolers, the DHL website says it is invalid and when I try to get the status of this order from the syscooling site, I get a 404 error.
On only a vaguely related note, has anyone used BTCrow to escrow BTC for private buy / sell transactions? I'm trying to sell seven of my S3s and the potential buyer wants to use this service. Thoughts? Thanks in advance for any advice.
Also, although Syscooling.com sent an email with a DHL shipping number for the coolers, the DHL website says it is invalid and when I try to get the status of this order from the syscooling site, I get a 404 error.
On only a vaguely related note, has anyone used BTCrow to escrow BTC for private buy / sell transactions? I'm trying to sell seven of my S3s and the potential buyer wants to use this service. Thoughts? Thanks in advance for any advice.
October 27, 2014, 06:20:18 PM
Did anyone receive the Assembly Instructions with their C1 Cooling Kit?
I did not get one.
If you did please PM me or Post it to the forum.
Thanks,
I did not get one.
If you did please PM me or Post it to the forum.
Thanks,
No there is a great picture on the website that shows it connected.
Only thing I am unsure of is if we need to clean the radiator (some general installs of water cooling they showed cleaning it to get rid of possible metal fragments).
October 27, 2014, 04:39:47 PM
Did anyone receive the Assembly Instructions with their C1 Cooling Kit?
I did not get one.
If you did please PM me or Post it to the forum.
Thanks,
I did not get one.
If you did please PM me or Post it to the forum.
Thanks,
October 27, 2014, 04:31:43 PM
Come on guys, it was a request..
My unit arrives tomorrow.
A Manual would be good for starters.
I am simply asking for the same information that they have listed for their other products
to be posted on their product web page.
Lucky You.
All of my three orders status are still- Paid Unshipped Valid.
Tupsu,
My account says the same thing as yours --> Paid Unshipped Valid
but, they shipped it on Friday 10/25/2014.
UPS to US
I received a notice email from UPS
October 27, 2014, 04:14:10 PM
Come on guys, it was a request..
My unit arrives tomorrow.
A Manual would be good for starters.
I am simply asking for the same information that they have listed for their other products
to be posted on their product web page.
Lucky You.
All of my three orders status are still- Paid Unshipped Valid.
October 27, 2014, 04:06:05 PM
@BitmainWarranty,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Why do you need the software before shipping?
Come on guys, it was a request..
My unit arrives tomorrow.
A Manual would be good for starters.
I am simply asking for the same information that they have listed for their other products
to be posted on their product web page.
October 27, 2014, 02:53:36 PM
@BitmainWarranty,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Why do you need the software before shipping?
The manual could be to set up cooling kit where once it comes they just need to fill and connect to miner.
Software I cannot justify other then someone checking that they are being shipped.
October 27, 2014, 01:59:29 PM
@BitmainWarranty,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Why do you need the software before shipping?
October 27, 2014, 11:27:05 AM
@BitmainWarranty,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
Please post the C1 Miner "Manual" and "Firmware" to the Bitmain product support web page at:
https://www.bitmaintech.com/support.htm
Thank You,
October 27, 2014, 07:35:44 AM
I can't get any information about the dimensions of C1 miner. Does it have the same chassis as the S3 miner? If not, what are the exact external dimensions of this miner? For the S3 miner the Bitmain's web page says "Size: 331 mm x 137 mm x 160 mm", but there is no Size information for the C1 miner?
Very similar. I'll let you know in a few days.
October 27, 2014, 05:37:24 AM
I can't get any information about the dimensions of C1 miner. Does it have the same chassis as the S3 miner? If not, what are the exact external dimensions of this miner? For the S3 miner the Bitmain's web page says "Size: 331 mm x 137 mm x 160 mm", but there is no Size information for the C1 miner?
October 27, 2014, 03:07:00 AM
C1 is shipping in the order it was placed and the cooling kits are shipping, too!!!
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
Any news if C1 is actually shipping as stated or going to be delayed?
Anyone received the cooling kit yet ?
Anyone received the cooling kit yet ?
Sounds Good! Have the C1's started shipping?
Yep, from last Friday. Bitmain is working its way through the order queue now.
October 26, 2014, 11:01:25 PM
C1 is shipping in the order it was placed and the cooling kits are shipping, too!!!
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
Any news if C1 is actually shipping as stated or going to be delayed?
Anyone received the cooling kit yet ?
Anyone received the cooling kit yet ?
Sounds Good! Have the C1's started shipping?
October 26, 2014, 05:34:33 PM
C1 is shipping in the order it was placed and the cooling kits are shipping, too!!!
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
If for some reasons, if your units are not shipping, please contact [email protected] or PM BITMAIN or PM us
You do not need to lie, nothing is shipped .
I read about sending info, and ordered 2 x C1 Order Date 2014-10-19
Today, there is still the same text , Liquid Cooled Miner C1, Batch 1 are estimated dispatched on Oct. 25th
I have already 2014-10-27 and order status is still Paid Unshipped Valid.
October 26, 2014, 09:01:42 AM
I spoke to someone else who received their cooling kits on friday - he is waiting for the C1's to arrive.
Jump to: