Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 166.

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: numnutz2009 on February 23, 2017, 09:03:48 AM

Quote from: mettalmag on February 23, 2017, 08:50:37 AM

I think my PCB board is dead, I checked my hashing boards on another S9 and they are working properly, but when I connect them to the original PCB board all the hashing boards are showing xxxx.
Is there any chance to get the S9 parts with the original seller or on amazon/ebay ?

well first you need to know if the batch your miner came from was before the auto tune firmware or after. the next thing is to find out if its a post t9 miner or a pre t9 miner. either way im sure you wont have much luck finding a spare controller on ebay or amazon...your better off emailing bitmain about getting a replacement...they arent too expensive i dont think. the only way people are selling spare parts is if a miner broke and they wanna make money off the pieces that still function properly. since most s9's are still under warranty or are running fine chances are no one has had to scrap their s9 for whatever little bit of money it can get on the secondary market. you can try but why waste the time and effort? just email them and get info on a replacement controller.

Hopefully when they release a new batch the quality control will be better.

numnutz2009

sr. member

Activity: 387

Merit: 254

Quote from: mettalmag on February 23, 2017, 08:50:37 AM

I think my PCB board is dead, I checked my hashing boards on another S9 and they are working properly, but when I connect them to the original PCB board all the hashing boards are showing xxxx.
Is there any chance to get the S9 parts with the original seller or on amazon/ebay ?

well first you need to know if the batch your miner came from was before the auto tune firmware or after. the next thing is to find out if its a post t9 miner or a pre t9 miner. either way im sure you wont have much luck finding a spare controller on ebay or amazon...your better off emailing bitmain about getting a replacement...they arent too expensive i dont think. the only way people are selling spare parts is if a miner broke and they wanna make money off the pieces that still function properly. since most s9's are still under warranty or are running fine chances are no one has had to scrap their s9 for whatever little bit of money it can get on the secondary market. you can try but why waste the time and effort? just email them and get info on a replacement controller.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

I think my PCB board is dead, I checked my hashing boards on another S9 and they are working properly, but when I connect them to the original PCB board all the hashing boards are showing xxxx.
Is there any chance to get the S9 parts with the original seller or on amazon/ebay ?

SA Bitcoin Brothers

member

Activity: 112

Merit: 18

Quote from: Sr.Urbanist on February 23, 2017, 01:21:40 AM

Quote from: Swimmer63 on February 22, 2017, 10:57:06 PM

March 1 delivery S9 appears to be through customs and in (or just left) Japan. Prior "Exception" disappeared.

Nice!

I see the T1s are back out for sale ...

My 5x T9s are orderded and 2x S9 13.5s. Lets see how they'll do

Sr.Urbanist

full member

Activity: 315

Merit: 120

Quote from: Swimmer63 on February 22, 2017, 10:57:06 PM

March 1 delivery S9 appears to be through customs and in (or just left) Japan. Prior "Exception" disappeared.

Nice!

I see the T1s are back out for sale ...

Swimmer63

legendary

Activity: 1593

Merit: 1004

March 1 delivery S9 appears to be through customs and in (or just left) Japan. Prior "Exception" disappeared.

mamiakimo

full member

Activity: 197

Merit: 100

after shipping your miner back take screen shot for FedEx bill and drop it on you support ticket they will give you a coupon with the same price of shipping
and they will ship your package back for free

Micky25

legendary

Activity: 974

Merit: 1000

they should eliminate that autotune crap, this is like training a mule for a horse race.

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: vg54dett on February 22, 2017, 04:56:35 AM

I received a S9 from Bitmain today, and one of the hashing board doesn't appear in the S9 management page.
It runs only at 2/3 hashrate , brand new out of the box ...
Just opened a ticket ...

the bitmain quality is falling down when they are moved from 28nm to 16nm die ...
S7 are bulldozers ...
S9 are paper plane ...

vg54dett

hero member

Activity: 501

Merit: 500

I received a S9 from Bitmain today, and one of the hashing board doesn't appear in the S9 management page.
It runs only at 2/3 hashrate , brand new out of the box ...
Just opened a ticket ...

kurbeks

sr. member

Activity: 1078

Merit: 255

Good look dealing with broken miner. Hope you fix it soon.

tbonetony

sr. member

Activity: 441

Merit: 250

No zuo no die why you try, u zuo u die dont be shy

Quote from: beltsniffer on February 21, 2017, 08:58:56 PM

Got my Feb 28th s9 today. Plugged it in and 1 board is only reading 37 asics instead of 63 and hashing at about 100gh/s. The other 2 boards are hashing normally. Tried restarting several times with different psu's/cables and get the same result every time. Nothing's loose or rattling around. Damn Bitmain. When are you guys gonna get your act together? I'm done buying their gear.

Makes me wonder if they tossed some old chips from an s1 in there.

This really sucks. Wish you good luck dealing with them and have the shipping waived.

beltsniffer

sr. member

Activity: 277

Merit: 250

Quote from: Sr.Urbanist on February 21, 2017, 09:49:51 PM

Quote from: beltsniffer on February 21, 2017, 09:38:41 PM

...nothing loose or making any noise.

I opened a ticket and waiting for a response. The problem is having to pay $250 to ship it back to them. Fed-Ex US -> China, isn't cheap.

Open a claim with FedEx because it was likely damaged in shipping.

It wasn't damaged in shipping. There is no physical damage to the box or miner.

Quote from: Sr.Urbanist on February 21, 2017, 09:49:51 PM

Quote from: beltsniffer on February 21, 2017, 09:38:41 PM

...nothing loose or making any noise.
I'll probably wind up send it to Colorado for repairs.

Well, if China doesn't work out ... that really sucks though. Where at in CO?I hope you lucked out and got it at the 1445 price when BTC took a jump. I am thinking BITMAIN may be getting used to wanting to keep customers. This is my first order.

The problem is there is so little competition and you're not getting the same hash.

bitmainwarranty.com is in Colorado. They do repairs on bitmain gear for a fee. shipping is much cheaper and time lost from mining is less.

Sr.Urbanist

full member

Activity: 315

Merit: 120

Quote from: beltsniffer on February 21, 2017, 09:38:41 PM

...nothing loose or making any noise.

I opened a ticket and waiting for a response. The problem is having to pay $250 to ship it back to them. Fed-Ex US -> China, isn't cheap.

Open a claim with FedEx because it was likely damaged in shipping.

Quote from: beltsniffer on February 21, 2017, 09:38:41 PM

...nothing loose or making any noise.
I'll probably wind up send it to Colorado for repairs.

Well, if China doesn't work out ... that really sucks though. Where at in CO?I hope you lucked out and got it at the 1445 price when BTC took a jump. I am thinking BITMAIN may be getting used to wanting to keep customers. This is my first order.

The problem is there is so little competition and you're not getting the same hash.

beltsniffer

sr. member

Activity: 277

Merit: 250

Quote from: Sr.Urbanist on February 21, 2017, 09:27:08 PM

Quote from: beltsniffer on February 21, 2017, 08:58:56 PM

Got my Feb 28th s9 today. Plugged it in and 1 board is only reading 37 asics instead of 63 ...

Try opening a ticket. Did you shake it lightly to see if a heat sink fell off?

Yes, I tried that. nothing loose or making any noise.

I opened a ticket and waiting for a response. The problem is having to pay $250 to ship it back to them. Fed-Ex US -> China, isn't cheap. Unless they offer to pay for the shipping. Which they should, since it was defective out of the box. But I'm not gonna hold my breath.

I'll probably wind up send it to Colorado for repairs.

Sr.Urbanist

full member

Activity: 315

Merit: 120

Quote from: beltsniffer on February 21, 2017, 08:58:56 PM

Got my Feb 28th s9 today. Plugged it in and 1 board is only reading 37 asics instead of 63 ...

Did you shake it lightly to see if a heat sink fell off?

From what I understand, I would stop hashing immediately and open a ticket. Sad

I got my 13.5 TH/s, Feb 28, today. I'm getting 13.6 ...

Sr.Urbanist

full member

Activity: 315

Merit: 120

Quote from: tbonetony on February 21, 2017, 12:44:37 PM

Quote from: Swimmer63 on February 21, 2017, 11:58:07 AM

My March 1 S9 shipped last night. It shows it was picked up and it already has an red Exception warning on the FedEx tracking page. Curious. Thrilled it's early, but the Exception thing always worries me. I wish they had not lost UPS.

Glad that they shipped early. What does the fedex exception say?

I agree. I hate FedEx. #ihateFedEx

They owe me over $1800 ...

beltsniffer

sr. member

Activity: 277

Merit: 250

Got my Feb 28th s9 today. Plugged it in and 1 board is only reading 37 asics instead of 63 and hashing at about 100gh/s. The other 2 boards are hashing normally. Tried restarting several times with different psu's/cables and get the same result every time. Nothing's loose or rattling around. Damn Bitmain. When are you guys gonna get your act together? I'm done buying their gear.

Makes me wonder if they tossed some old chips from an s1 in there.

GWhisper

full member

Activity: 120

Merit: 100

My last 3 deliveries from Bitmain have triggered an exception from Fedex - due to missing the cut-off time. It just pushes out the expected delivery date by a day.

tbonetony

sr. member

Activity: 441

Merit: 250

No zuo no die why you try, u zuo u die dont be shy

Quote from: Swimmer63 on February 21, 2017, 01:17:59 PM

Quote from: tbonetony on February 21, 2017, 12:44:37 PM

Quote from: Swimmer63 on February 21, 2017, 11:58:07 AM

My March 1 S9 shipped last night. It shows it was picked up and it already has an red Exception warning on the FedEx tracking page. Curious. Thrilled it's early, but the Exception thing always worries me. I wish they had not lost UPS.

Glad that they shipped early. What does the fedex exception say?

There is no explanation for the exception. So it's hard to say if there is actually an issue or not.
Normally, if you get an exception, it's while the miner is going through Chinese customs. It's because Bitmain's paperwork is bad or the govt is just being a pain. I am in the US and it always seems to work itself out. But it does delay delivery.
But I'm not convinced there is a real problem here yet.

I hope it will solve soon:)
based on my limited experience with fedex, exceptions were usually when they were imported into Canada. Canadian customs seemed to like opening every freaking box under my name Undecided

Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 166. (Read 531298 times)