Topic: [BTC2] Bitcoin 2, BTC Fork 1:1, PoS 🔥 Anonymous ⚡️Instant TX - page 85. (Read 93529 times)

Quote from: Ranyar on May 04, 2018, 08:25:23 AM

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
"validtime": true,
"haveconnections": true,
"walletunlocked": true,
"mintablecoins": true,
"enoughcoins": true,
"mnsync": true,
"staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

You will see mints/rewards of 0.6 BTC2 every time that your node created a block that was accepted by the network. How long before you create the first block depends on how much you are staking. If more than 20 BTC2, usually within 24 hours.

Great. I got a 0.6 reward. Does this amount depends on the hardware performance of the computer or it is completely depends on the amount of BTC2 I'm holding in my wallet?

The amount is always the same per block for everyone. The number of times you get that reward per day/month depends on how much BTC2 are you staking and for how long. (Just keep the wallet running 24/7 if you want to maximize results.)

Your hardware is not irrelevant but probably makes very little difference unless you are using most of your CPU on some heavy app such as a video game, then during that time your staking performance might suffer.

Ranyar

sr. member

Activity: 364

Merit: 257

Be kind to each other

I understand, but "chat exchange" is only "crypto-to-crypto" p2p exchange method, not "crypto-fiat". What kind of legal hassles can happen in this case? Without logo.
Or do you mean legal hassles with ICO, not with chat?
Ok, i don't will start this chat.

jackleszz

member

Activity: 916

Merit: 27

Bitcoin 2 Team

Quote from: jackleszz on May 03, 2018, 10:18:09 PM

Quote from: Ranyar on May 03, 2018, 05:29:21 PM

Hi Jackleszz!
I want ask can i start some trading discussion in this tread? Like a "want to buy/sell X coins for Y BTC/ETH"? Or i must start a telegram/discord chat for it?
Thanks.

This is not a self-moderated thread so if it is allowed by bitcointalk's rules on this section of the forum, then you can.

Thanks sir!

P.S. When exchanges?

Preferably we would have a web-based block explorer along with the in-wallet one that we already have first so that may have to be done before an exchange listing.
Everything will be done ASAP, but can't know exactly when yet.

akiash

newbie

Activity: 152

Merit: 0

Quote from: Ranyar on May 04, 2018, 10:53:42 AM

Quote from: akiash on May 04, 2018, 10:40:53 AM

Quote from: Frankie001 on May 04, 2018, 07:58:57 AM

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
   "validtime": true,
   "haveconnections": true,
   "walletunlocked": true,
   "mintablecoins": true,
   "enoughcoins": true,
   "mnsync": true,
   "staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

You will see mints/rewards of 0.6 BTC2 every time that your node created a block that was accepted by the network. How long before you create the first block depends on how much you are staking. If more than 20 BTC2, usually within 24 hours.

Great. I got a 0.6 reward. Does this amount depends on the hardware performance of the computer or it is completely depends on the amount of BTC2 I'm holding in my wallet?

How much amount you have for 0.6 reward? I think it something around 10 coins for each 0.6 reward? Admin, can you help me with counting?

I have over 20 coins

jackleszz

member

Activity: 916

Merit: 27

Bitcoin 2 Team

Bitcoin 2 Core version 2.1 (64-bit)
wallet above stuck on block 999 for me, it doesn't sync past that point, any advice?

How many peers/connections do you see? Click Tools - information
You can try to:
A) Restart the app - that may help already.
if not:
B) Stop the app, delete peers.dat (in the Bitcoin 2 data directory), start the app.
C) Disable firewall, usually not required.

Ranyar

sr. member

Activity: 364

Merit: 257

Be kind to each other

Quote from: akiash on May 04, 2018, 10:40:53 AM

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
"validtime": true,
"haveconnections": true,
"walletunlocked": true,
"mintablecoins": true,
"enoughcoins": true,
"mnsync": true,
"staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

You will see mints/rewards of 0.6 BTC2 every time that your node created a block that was accepted by the network. How long before you create the first block depends on how much you are staking. If more than 20 BTC2, usually within 24 hours.

Great. I got a 0.6 reward. Does this amount depends on the hardware performance of the computer or it is completely depends on the amount of BTC2 I'm holding in my wallet?

How much amount you have for 0.6 reward? I think it something around 10 coins for each 0.6 reward? Admin, can you help me with counting?

akiash

newbie

Activity: 152

Merit: 0

Quote from: jackleszz on May 03, 2018, 10:18:09 PM

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
"validtime": true,
"haveconnections": true,
"walletunlocked": true,
"mintablecoins": true,
"enoughcoins": true,
"mnsync": true,
"staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

You will see mints/rewards of 0.6 BTC2 every time that your node created a block that was accepted by the network. How long before you create the first block depends on how much you are staking. If more than 20 BTC2, usually within 24 hours.

Great. I got a 0.6 reward. Does this amount depends on the hardware performance of the computer or it is completely depends on the amount of BTC2 I'm holding in my wallet?

Ranyar

sr. member

Activity: 364

Merit: 257

Be kind to each other

Quote from: Ranyar on May 03, 2018, 05:29:21 PM

Hi Jackleszz!
I want ask can i start some trading discussion in this tread? Like a "want to buy/sell X coins for Y BTC/ETH"? Or i must start a telegram/discord chat for it?
Thanks.

This is not a self-moderated thread so if it is allowed by bitcointalk's rules on this section of the forum, then you can.

Thanks sir!
I think about chat exchange but decided not to create it in order not to have problems.
P.S. When exchanges?

Frankie001

member

Activity: 125

Merit: 10

Bitcoin 2 Core version 2.1 (64-bit)
wallet above stuck on block 999 for me, it doesn't sync past that point, any advice?

jackleszz

member

Activity: 916

Merit: 27

Bitcoin 2 Team

Quote from: ekoja on May 04, 2018, 02:46:09 AM

Thank you both. I can see my coins matured now.
Is there anyway to convert the zBTC2 back to BTC2?

Click Privacy. Next to the "Spend Zerocoin" button there is a zBTC2 control button and available zBTC2 balance. You can either try to just convert the available balance by putting it to the "Amount" field at the bottom and clicking "Spend Zerocoin".

Or you can click the zBTC2 Control button and select the coins manually, and type the zBTC2 Selected amount value to the "Amount" field at the bottom and click "Spend Zerocoin".

Hiromono

jr. member

Activity: 65

Merit: 1

Bitcoin 2 Team

Quote from: jackleszz on May 03, 2018, 10:18:09 PM

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
"validtime": true,
"haveconnections": true,
"walletunlocked": true,
"mintablecoins": true,
"enoughcoins": true,
"mnsync": true,
"staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

You will see mints/rewards of 0.6 BTC2 every time that your node created a block that was accepted by the network. How long before you create the first block depends on how much you are staking. If more than 20 BTC2, usually within 24 hours.

ekoja

hero member

Activity: 700

Merit: 500

Quote from: Ranyar on May 03, 2018, 05:29:21 PM

Hi Jackleszz!
I want ask can i start some trading discussion in this tread? Like a "want to buy/sell X coins for Y BTC/ETH"? Or i must start a telegram/discord chat for it?
Thanks.

This is not a self-moderated thread so if it is allowed by bitcointalk's rules on this section of the forum, then you can.

Quote from: ekoja on May 03, 2018, 07:49:56 PM

Hi, how long will the zBTC2 mature?
Why does the BTC2 converted into zBTC2 automatically?

The small amounts like 0.05 are likely to mature much faster than the bigger amounts like 20. It depends on how long it takes by chance for someone to mint another coin with the same value.
As the Bitcoin 2 network grows, the amount of time it takes will be lower and lower. By the way the automint setting may be disabled in the next version by default so as to not confuse people, even though it is better for the network overall if the automint is on.

Thank you both. I can see my coins matured now.
Is there anyway to convert the zBTC2 back to BTC2?

akiash

newbie

Activity: 152

Merit: 0

Hi, I downloaded new wallet. It is fully synced and wallet shows a balance. But it is saying that staking is not active. Is there any troubleshooting steps that I can follow to solve this problem? Thanks

Just wait and it should turn green. If after 5 more minutes that's not the case, then go to Tools - Debug Console. Type: getstakingstatus
it will state something like:
{
"validtime": true,
"haveconnections": true,
"walletunlocked": true,
"mintablecoins": true,
"enoughcoins": true,
"mnsync": true,
"staking status": true
}

So if all those are true, you're staking. If one or more of them is false, you can reply back with the output.

Thanks a lot. Wallet was not unlocked. Now its staking. Thanks again for the support. Is there any way to check the results of staking?

Hiromono

jr. member

Activity: 65

Merit: 1

Bitcoin 2 Team