2 units says in stock, when I looked at the single unit , it says pre-sale for next batch june 27th
http://minersource.net/products/btc-garden-am-v1-310gh-bitcoin-miner-ships-7-11Plenty in stock, and shipping is a lot less then $40
Topic: btcgarden-AM-v1 down to $0.53/GHs. In stock for international selling! - page 27. (Read 162664 times)
July 10, 2014, 06:52:50 PM
Plenty in stock, and shipping is a lot less then $40
July 10, 2014, 06:36:30 PM
2 units says in stock, when I looked at the single unit , it says pre-sale for next batch june 27th
July 10, 2014, 06:26:27 PM
In stock unless they are sold out on website
July 10, 2014, 06:20:54 PM
Are these available for immediate shipping, or a future batch?
July 10, 2014, 02:57:21 PM
These prices are fantastic...
1020 (1180 shipped to US) for 1.2TH - we're not quite there with efficiency yet, but price per GH is competitive with the S3 etc.
1020 (1180 shipped to US) for 1.2TH - we're not quite there with efficiency yet, but price per GH is competitive with the S3 etc.
July 10, 2014, 02:04:52 PM
Damn, I ordered 1 day too soon and missed out on the price decrease.
Mrstrongbow,
Sorry I didn't your posts till just now. You got both working on one Pi now, correct?
Didn't mean to leave you hanging out there without a response.
Mrstrongbow,
Sorry I didn't your posts till just now. You got both working on one Pi now, correct?
Didn't mean to leave you hanging out there without a response.
All good yo
Yeppers, I've got both my AM-V1 miners on a single R-Pi, turns the R-Pi unit I was using (purchased with my 1st AM-V1) crapped out...as I swapped the SD card into a brand new R-Pi unit I got off eBay and they are both hashing, chained together. I will get better pics posted soon as my setup will be sweeter once I get my plexi panels cut and the over-sized fans mounted up!
July 10, 2014, 01:55:22 PM
Damn, I ordered 1 day too soon and missed out on the price decrease.
Mrstrongbow,
Sorry I didn't your posts till just now. You got both working on one Pi now, correct?
Didn't mean to leave you hanging out there without a response.
Mrstrongbow,
Sorry I didn't your posts till just now. You got both working on one Pi now, correct?
Didn't mean to leave you hanging out there without a response.
July 10, 2014, 01:38:51 PM
Update latest price. $0.85/GHs.
$340 for 1 miner with 1 Rpi.
$520 for 2 miners with 1 Rpi.
$1020 for 4 miners with 1 Rpi.
Update latest shipping cost.
Product review:
http://www.cybtc.com/thread-8319-1-1.html
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-btcgarden-am-v1-setup-hd-677707
https://bitcointalksearch.org/topic/guide-cxboyminer-btc-garden-am-v1-setup-guide-673324
$340 for 1 miner with 1 Rpi.
$520 for 2 miners with 1 Rpi.
$1020 for 4 miners with 1 Rpi.
Update latest shipping cost.
Product review:
http://www.cybtc.com/thread-8319-1-1.html
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-btcgarden-am-v1-setup-hd-677707
https://bitcointalksearch.org/topic/guide-cxboyminer-btc-garden-am-v1-setup-guide-673324
They should fly off the shelf at this price.
Getting pretty damn close to SP30 price point. May be less efficient but it's in hand as opposed to September pre-order.
July 10, 2014, 12:48:42 PM
Update latest price. $0.85/GHs.
$340 for 1 miner with 1 Rpi.
$520 for 2 miners with 1 Rpi.
$1020 for 4 miners with 1 Rpi.
Update latest shipping cost.
Product review:
http://www.cybtc.com/thread-8319-1-1.html
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-btcgarden-am-v1-setup-hd-677707
https://bitcointalksearch.org/topic/guide-cxboyminer-btc-garden-am-v1-setup-guide-673324
$340 for 1 miner with 1 Rpi.
$520 for 2 miners with 1 Rpi.
$1020 for 4 miners with 1 Rpi.
Update latest shipping cost.
Product review:
http://www.cybtc.com/thread-8319-1-1.html
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-btcgarden-am-v1-setup-hd-677707
https://bitcointalksearch.org/topic/guide-cxboyminer-btc-garden-am-v1-setup-guide-673324
July 10, 2014, 12:40:21 AM
Good to see everything work out for you. 
Likewise and thanks for pointing out the troubleshooting guide
July 10, 2014, 12:35:38 AM
Good to see everything work out for you.
July 09, 2014, 11:27:08 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
Well now I can't get EITHER miner to work!
Ugh, just checked BOTH units individually and NEITHER will mine. My first unit was hashing great up until I chained the second unit. ALL wiring is correct. I have even tried reversing the order when chained AND single hook up.
Please help as I am now dead in the water as far as hashing goes
CGminer checks fine and reports back but neither machine will hash. I also made sure to change the BLADE quantity in the config.
Could you check out our troubleshooting: http://www.btcgarden.com/manual/troubleshooting.pdf
It should help. Please email to [email protected] if you still having issues.
I will look now. I did however just follow these steps....
1) Configure interface for 1 board.
2) Connect the rpi to the right side of 1 board. Leave the left side open. Turn it on and make sure it hashes
3) If it doesn't, power off and move to the next board. Repeat until you find a board that hashes.
4) Once you have 155gh going, connect a ribbon cable to the left side of the hashing board and the right side of the next board in line. Power on and change board count to 2. Make sure you get to 310gh.
5) Repeat steps, increasing the board count until you have all boards hashing.
2) Connect the rpi to the right side of 1 board. Leave the left side open. Turn it on and make sure it hashes
3) If it doesn't, power off and move to the next board. Repeat until you find a board that hashes.
4) Once you have 155gh going, connect a ribbon cable to the left side of the hashing board and the right side of the next board in line. Power on and change board count to 2. Make sure you get to 310gh.
5) Repeat steps, increasing the board count until you have all boards hashing.
Still nothing. Not even a hint!
4+ hours I have into ADDING a second AM-V1 miner and getting no where...actually I am getting BACKWARDS as now my 1st AM-V1 miner no longer hashes like it was earlier today.
Working! My R-Pi died. Replaced with a spare, double checked all my connections and good to go.
Thanks much!
July 09, 2014, 10:22:55 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
Well now I can't get EITHER miner to work!
Ugh, just checked BOTH units individually and NEITHER will mine. My first unit was hashing great up until I chained the second unit. ALL wiring is correct. I have even tried reversing the order when chained AND single hook up.
Please help as I am now dead in the water as far as hashing goes
CGminer checks fine and reports back but neither machine will hash. I also made sure to change the BLADE quantity in the config.
Could you check out our troubleshooting: http://www.btcgarden.com/manual/troubleshooting.pdf
It should help. Please email to [email protected] if you still having issues.
I will look now. I did however just follow these steps....
1) Configure interface for 1 board.
2) Connect the rpi to the right side of 1 board. Leave the left side open. Turn it on and make sure it hashes
3) If it doesn't, power off and move to the next board. Repeat until you find a board that hashes.
4) Once you have 155gh going, connect a ribbon cable to the left side of the hashing board and the right side of the next board in line. Power on and change board count to 2. Make sure you get to 310gh.
5) Repeat steps, increasing the board count until you have all boards hashing.
2) Connect the rpi to the right side of 1 board. Leave the left side open. Turn it on and make sure it hashes
3) If it doesn't, power off and move to the next board. Repeat until you find a board that hashes.
4) Once you have 155gh going, connect a ribbon cable to the left side of the hashing board and the right side of the next board in line. Power on and change board count to 2. Make sure you get to 310gh.
5) Repeat steps, increasing the board count until you have all boards hashing.
Still nothing. Not even a hint!
4+ hours I have into ADDING a second AM-V1 miner and getting no where...actually I am getting BACKWARDS as now my 1st AM-V1 miner no longer hashes like it was earlier today.
July 09, 2014, 09:54:08 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
Well now I can't get EITHER miner to work!
Ugh, just checked BOTH units individually and NEITHER will mine. My first unit was hashing great up until I chained the second unit. ALL wiring is correct. I have even tried reversing the order when chained AND single hook up.
Please help as I am now dead in the water as far as hashing goes
CGminer checks fine and reports back but neither machine will hash. I also made sure to change the BLADE quantity in the config.
Could you check out our troubleshooting: http://www.btcgarden.com/manual/troubleshooting.pdf
It should help. Please email to [email protected] if you still having issues.
July 09, 2014, 08:36:13 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
Well now I can't get EITHER miner to work!
Ugh, just checked BOTH units individually and NEITHER will mine. My first unit was hashing great up until I chained the second unit. ALL wiring is correct. I have even tried reversing the order when chained AND single hook up.
Please help as I am now dead in the water as far as hashing goes
CGminer checks fine and reports back but neither machine will hash. I also made sure to change the BLADE quantity in the config.
July 09, 2014, 08:23:44 PM
http://btcminer.com.au
I now have a 1.2TH (4units with 1Pi) on hand ready to ship.
Hope to have more on their way ASAP.
Great kit
I now have a 1.2TH (4units with 1Pi) on hand ready to ship.
Hope to have more on their way ASAP.
Great kit July 09, 2014, 08:21:58 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
Well now I can't get EITHER miner to work!
July 09, 2014, 07:27:50 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
Gotcha. Checking my wiring again now
July 09, 2014, 07:18:42 PM
I've got two units chained to 1 RPi with the old mining software. The new mining software is supposed to allow 4 units to chain together.
July 09, 2014, 07:08:20 PM
How does one go about checking/updating my firmware? I would like to chain 2x AM-V1 miners together and I am unsure if I have the latest fw.
Thanks
Thanks
Jump to: