Topic: Bytom Mining - ASIC algorithm now cracked by GPU miners? Big profits? - page 6. (Read 17672 times)
June 21, 2018, 01:22:04 PM
On bytom website, they are a partner of bitmain?
June 21, 2018, 12:50:22 PM
is this useless for now? We cant sell what we mined
June 21, 2018, 09:11:14 AM
So what do you guys do with your mined Bytom aside from holding in wallet? is there any exchange that accept it? as far as I know exchanges only accept erc20 ones.
June 21, 2018, 08:52:56 AM
Is there any new miner with a really low dev fee? The current miner's have over 10% 
June 21, 2018, 06:47:50 AM
Now you can mine using Bminer.
June 19, 2018, 05:17:00 PM
I`am taking about 340 H/s with ASUS DUAL 1060 6 gb
June 19, 2018, 11:03:18 AM
1080 not working
get error 35
any solutions?
get error 35
any solutions?
June 19, 2018, 07:56:51 AM
Trolling bitmain and making bank. It doesn't get any better. 
I have 2.6 khs
I have 2.6 khs
June 19, 2018, 12:50:52 AM
B3 was a scam, nice.
June 18, 2018, 04:04:34 PM
Can others confirm a 1080 TI is doing ~1000 hashes on Bytom?
What are the system specs? CPU?
What are the system specs? CPU?
i havent mined Bytom for a bit, but i just grabbed that latest "Nebu_Tech" miner and tried it. id say 1000h/s is surely doable
mine did 950 out the gate @ a simple 1950 clock, im sure if others got their core to 2050-2100 it would be over 1000h/s
@ 72% PL it does 825 still, this is matched with an 8700k, in a desktop workstation, not a rig , and i believe x8 pci-e
(MSI FE 1080ti)
June 18, 2018, 11:13:43 AM
Can others confirm a 1080 TI is doing ~1000 hashes on Bytom?
What are the system specs? CPU?
What are the system specs? CPU?
I have a sai/power limiter but @70% TDP i do get 770 hashes, with both rigs (i3-8100 3,60Ghz/8G ram/Win10) 1x asus strix rig / 1 evga rig (2ftw3/4sc's). Sadly I get constant crashes of the miner, I do believe its problem after updating Win, because I've tried with all the last drivers, in both rigs and it's the same s**t. BTW those values do consume around 190/195W, so I believe there's room to get the 1.000 @ 100%
June 18, 2018, 10:31:20 AM
Can others confirm a 1080 TI is doing ~1000 hashes on Bytom?
What are the system specs? CPU?
What are the system specs? CPU?
June 16, 2018, 01:57:32 PM
Whats your over clocking settings though? Lower TDP on the afterburner doesn't always equal lower hashes if combined with other adjustments. When you overclock the core with 55% TDP limit applied you are basically undervolting the core. Thats why you get:
e.g. 260h/s at stock settings @ 62%TDP on a 1060 3gb 62 degrees
and 263h/s at +160 core +400mem @ 55% TDP on the same card.
Also in nvidia inspector P0 mode forces better performance.
e.g. 260h/s at stock settings @ 62%TDP on a 1060 3gb 62 degrees
and 263h/s at +160 core +400mem @ 55% TDP on the same card.
Also in nvidia inspector P0 mode forces better performance.
gonna try nvidia inspector forced p0state in a min.. currently my 1080 for example is at 70% tdp, 135+ core and 600+ mem oc. spitting out 600-620 hashes per sec.
edit: 1060s are doing between 280 and 300 hashes at 62% tdp, 135+ core and 400+ mem
June 16, 2018, 01:35:05 PM
Whats your over clocking settings though? Lower TDP on the afterburner doesn't always equal lower hashes if combined with other adjustments. When you overclock the core with 55% TDP limit applied you are basically undervolting the core. Thats why you get:
e.g. 260h/s at stock settings @ 62%TDP on a 1060 3gb 62 degrees
and 263h/s at +160 core +400mem @ 55% TDP on the same card.
Also in nvidia inspector P0 mode forces better performance.
e.g. 260h/s at stock settings @ 62%TDP on a 1060 3gb 62 degrees
and 263h/s at +160 core +400mem @ 55% TDP on the same card.
Also in nvidia inspector P0 mode forces better performance.
June 16, 2018, 11:02:38 AM
I have 4 rigs.. ranging from 2 GB RAM to 4 GB RAM.. cant say I experience any discarded shares on any of my rigs.
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
If you want to reduce your power consumption try this:
1. Install Nvidia inspector 》 choose force p2 mode in common off. Also choose maximum performance.
2. In afterburner. Set power limit to 55%. Then on each card set core to +150. Ram +400. (These should work on any card. With Samsung you should go to +500ram.) Going higher ram has no effect. Higher core can help. Try steps of +10.
3. Goto power settings. Advanced in Windows and change maximum cpu usage to 10%. This will shave off about 20watts per cpu and only effect the hash rate slightly.
On a i5 4 x 1060 this gives you about 1080h/s. At about 300watts.
yeah I could try lower CPU max utilization.. but as for the gpus the thing that can lower power usage is to lower tdp..but then I loses hashes.. I think ive found my sweet spot at around 70% tdp for the higher end cards (1070/ti/1080) and the 1060s performs well enough at around 62% tdp
June 16, 2018, 03:59:33 AM
I have 4 rigs.. ranging from 2 GB RAM to 4 GB RAM.. cant say I experience any discarded shares on any of my rigs.
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
If you want to reduce your power consumption try this:
1. Install Nvidia inspector 》 choose force p2 mode in common off. Also choose maximum performance.
2. In afterburner. Set power limit to 55%. Then on each card set core to +150. Ram +400. (These should work on any card. With Samsung you should go to +500ram.) Going higher ram has no effect. Higher core can help. Try steps of +10.
3. Goto power settings. Advanced in Windows and change maximum cpu usage to 10%. This will shave off about 20watts per cpu and only effect the hash rate slightly.
On a i5 4 x 1060 this gives you about 1080h/s. At about 300watts.
June 15, 2018, 03:09:22 PM
I have 4 rigs.. ranging from 2 GB RAM to 4 GB RAM.. cant say I experience any discarded shares on any of my rigs.
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
oh and by the way...this algo really likes power... normally my cards use 1300w(lyra2z) to around 1500w(equi or/and eth) but this shit wants 1800w.. prolly because every CPU have to work more aswell
I guess they are releasing more efficient miners in the future!
June 15, 2018, 02:52:32 PM
Any good pools for Bytom?
uupool is not counting like 50-60% of the stable hash rate sent to it.
uupool is not counting like 50-60% of the stable hash rate sent to it.
How much memory in your system? I had 4GB and ran into this same issue with 25%-50% shares being rejected by pool. However, when I tried again with 8GB RAM then it became stable and normal with very few rejected shares. My cpu was C3930 Kaby Lake edition so lower end cpu too.
June 14, 2018, 04:42:53 PM
I have setup my miner to mine on any of the btom pools. I keep getting "The remote host closed the connection" and also I am not getting any Accepted shares. It keeps saying New job arrived and Found a target, submitted.
Is the profitability very high or am I doing something wrong?
Is the profitability very high or am I doing something wrong?
June 12, 2018, 11:20:34 AM
Any good pools for Bytom?
uupool is not counting like 50-60% of the stable hash rate sent to it.
uu is fine for me, maybe check ur ping to the pooluupool is not counting like 50-60% of the stable hash rate sent to it.
Jump to: