[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 43.

makushin170

newbie

Activity: 2

Merit: 0

Quote from: Mashy81 on April 26, 2018, 06:29:12 AM

That is still ok.
If you want higher you need to flash vega64 bios and soft power play table edit.

thanks for the tip. you are using the default settings of the drivers? now I have configured as in the screenshot, but I'm probably a fool :-)https://pp.userapi.com/c840320/v840320090/7a1f2/qxvtPUN2qg0.jpg

Sgsg666

jr. member

Activity: 113

Merit: 1

Quote from: rednoW on April 25, 2018, 06:41:02 AM

Quote from: carlosmonaco on April 25, 2018, 06:29:15 AM

I tried my best ^^ I'm using reference card 56 with 64 bios.
OverdriveNtool is not working with 18.3.4 and I can't run above 1090 even on old driver. ( this is the same for all my card (20 cards))

OverdriveNtool is working like a charm with newest drivers.
Here is a screen of my Sapphire Pulse Vega56 with shitty hynix mem mining cryptonight-heavy @ 140watt

Can you post your Hwinfo64? tnx!

Mashy81

jr. member

Activity: 225

Merit: 1

Quote from: makushin170 on April 26, 2018, 05:29:40 AM

Hello! XMR_Cast the best! Wink

But I can't get more 1950 h/s from Vega56. Tell me, what you make settings in Wattman for Vega 56 on Driver 18.3.4 for the core, memory, voltage ...
Sorry, for my bad english Grin

That is still ok.
If you want higher you need to flash vega64 bios and soft power play table edit.

makushin170

newbie

Activity: 2

Merit: 0

Hello! XMR_Cast the best! Wink

But I can't get more 1950 h/s from Vega56. Tell me, what you make settings in Wattman for Vega 56 on Driver 18.3.4 for the core, memory, voltage ...
Sorry, for my bad english Grin

crazyice0223

newbie

Activity: 14

Merit: 0

Can I add a similar claymore temperature-based fan control? Cry

Treebeardz

newbie

Activity: 7

Merit: 0

As of the 21st CastXMR seems to be having issues with Nicehash. 20% rejected by pool. No memory errors in HWinfo and 0% Invalid Computation result. Two other miners I know confirmed this as well and they have completely different rigs and setups. I am running three six card gpu rigs two running on nicehash and the 3rd on NanoPool. All the rigs have the same setup and tune. The NanoPool rig does not experiences issues and does not report the 20% rejected by pool. The hashrate reported by the pool is accurate as well. The two rigs running on nicehash both experience a 18 to 20% rejected by pool error. This is reported on nicehash as well "Rejected(target)" nicehash also reports a lower then expected accepted average hash rate over 72 hours.

Has anyone else seen this or run into this issue with nicehash since 04/21/2019

Cyan_Antares

newbie

Activity: 126

Merit: 0

Quote from: alucard20724 on April 25, 2018, 09:21:06 PM

Quote from: netgeek3 on April 25, 2018, 08:43:04 PM

Quote from: Cyan_Antares on April 25, 2018, 08:21:08 PM

darn, making almost 11€ a day with 4 Vega 64 and 16€+ a day with 6 Vega 56 (unmodded) using Awesome Miner to mine on Nicehash pool and CryptonightV7. Shocked

Vega are ruling again like in the old times!

You got that right. Mining with 5 x Vega 64 + 2 x Vega 56 on one rig and 4 x Vega FE on the other and making good money right now - right around $70/day total.

Has nicehash stopped sending cryptonight mixed with the cryptonightv7 on their cryptonightv7 port? i.e. port 3363 . i had to remove my vega's from port 3363 on nicehash because of that.

yes, they did. I have several rigs using Awesome Miner with Cast XMR on Nicehash pool to mine CryptonightV7 and I haven't experienced that problem whatsoever. So great Vega are ruling again!

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Sharpeich on April 26, 2018, 01:09:18 AM

interesting statistics for my cards....the ancient HD7950 on Claymore's miner shows 450 H/s on CN v7 (monero), the newest Asus Strix Vega64 on CastXMR miner shows 1980-2020 H/s. So hashrate is 4 times higher. Both cards work with same pool as 2 workers of same login. I started both cards' miners at the same time, after 1 hour of work miner of 7950 reports 100 accepted shares, miner of Vega64 reports 120 accepted shares. JUST +20% MORE !!! Huh

So what is all that 2000+ hashrate for?

1 hour of work is nothing due to probability nature ... Moreover, pool can assign different diff for your workers. So you'll have less shares but more "valuable" ones

Sharpeich

newbie

Activity: 62

Merit: 0

interesting statistics for my cards....the ancient HD7950 on Claymore's miner shows 450 H/s on CN v7 (monero), the newest Asus Strix Vega64 on CastXMR miner shows 1980-2020 H/s. So hashrate is 4 times higher. Both cards work with same pool as 2 workers of same login. I started both cards' miners at the same time, after 1 hour of work miner of 7950 reports 100 accepted shares, miner of Vega64 reports 120 accepted shares. JUST +20% MORE !!! Huh

So what is all that 2000+ hashrate for?

crazyice0223

newbie

Activity: 14

Merit: 0

Is it possible to specify the virtual memory and ram requirements required by the heavn algorithm? Single card standard vega 64 or rx580

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: netgeek3 on April 25, 2018, 08:43:04 PM

Quote from: Cyan_Antares on April 25, 2018, 08:21:08 PM

darn, making almost 11€ a day with 4 Vega 64 and 16€+ a day with 6 Vega 56 (unmodded) using Awesome Miner to mine on Nicehash pool and CryptonightV7. Shocked

Vega are ruling again like in the old times!

You got that right. Mining with 5 x Vega 64 + 2 x Vega 56 on one rig and 4 x Vega FE on the other and making good money right now - right around $70/day total.

Has nicehash stopped sending cryptonight mixed with the cryptonightv7 on their cryptonightv7 port? i.e. port 3363 . i had to remove my vega's from port 3363 on nicehash because of that.

netgeek3

newbie

Activity: 12

Merit: 0

Quote from: Cyan_Antares on April 25, 2018, 08:21:08 PM

darn, making almost 11€ a day with 4 Vega 64 and 16€+ a day with 6 Vega 56 (unmodded) using Awesome Miner to mine on Nicehash pool and CryptonightV7. Shocked

Vega are ruling again like in the old times!

You got that right. Mining with 5 x Vega 64 + 2 x Vega 56 on one rig and 4 x Vega FE on the other and making good money right now - right around $70/day total.

Cyan_Antares

newbie

Activity: 126

Merit: 0

darn, making almost 11€ a day with 4 Vega 64 and 16€+ a day with 6 Vega 56 (unmodded) using Awesome Miner to mine on Nicehash pool and CryptonightV7. Shocked

Vega are ruling again like in the old times!

netgeek3

newbie

Activity: 12

Merit: 0

I am having an unusual error problem with V 1.0.0 and have had the problem through the last few iterations.

When mining certain coins (this has happened with Stellite, Plura and Haven that I can remember), the miner will suddenly drop authentication from the pool and keep hashing with no results. The errors read as follows:

[18:47:31] GPU0 Found Nonce, submitting...
[18:47:32] !Rejected by pool! Reason: Unauthenticated

This happens after a period of successful mining, then it will start rejecting. This happens on multiple pools, so I don't think it's the pool, and I've had it on multiple coins. If I were running the wrong variant of the algorithm, I could understand, but that's not the case.

Ideas?

optii

newbie

Activity: 23

Merit: 3

--maxmem completely destroys my HS on cryptonightv7

vega 56 in its own PC drops to 900-1000

vega 64 in its own PC drops to 1300

actually by drops, i mean its already starts mining at that speed and doesnt go up....

and vega 64 doesnt drop HS anymore with 1.0.0 (that perf hit that happened with 096)

btw my HBCC is disabled.

Combat Fighter

newbie

Activity: 18

Merit: 0

Quote from: glph3k on April 24, 2018, 10:56:30 AM

Hi,

Cast XMR version 1.0 is available.

Now CryptoNight Lite variants are supported. Lite coins like Aeon, IPBC and Turtle.

With the Lite algo higher hash rates can be achieved as it only uses an 1 MB scratchpad.

Following hash rates should be reachable.

RX Vega 56/64: 4250 Lite Hashes/s
RX 470/570/480/580: 1600 Lite Hashes/s

Use the --memset option to squeeze some extra hashes. It was enabled by default in the 0.9.7 version, now it is default disabled. It is probably only recommendable if a hash rate monitor is used to reset the GPU if an hash rate is drop is detected. Btw. from my observations the 18.3.4 drivers seem more resilient against hash rate drops then the legacy blockchain beta drivers.

Regards,
Glph3k

Cast XMR Version 1.0.0 (2018/4/24)

- Support for Aeon (AEON) CryptoNight Lite variant set --algo=3 to mine
- Support for Turtlecoin (TRTL) CryptoNightV7 Lite variant set --algo=4 to mine
- Support for Interplanetary Broadcast Coin (IPBC) CryptoNight Lite IPBC variation set --algo=5 to mine
- Up to 3% performance improvement with new option --maxmem to allocate the maximum memory of the card. For Vega cards the "HBCC Memory Segment" has to be disabled in the Radeon Settings to use the option. Disadvantage is a higher risk of hash rate drops when the --maxmem option is used.

Download Cast XMR 1.0.0 for Windows (64bit)

SHA256 hash of cast_xmr-vega-win64_100.zip:
fab141ce2b3e3b32636fedfc242e9b91edc21317e108fb361368570694dd338e

Thanks

MaxMidnite

newbie

Activity: 143

Merit: 0

Any way to improve the X580s hashrate, wish to switch to this miner from Claymore, but I get better hash on his??
Mining Intense Coin

amanda89

newbie

Activity: 35

Merit: 0

Quote from: glph3k on April 24, 2018, 10:56:30 AM

Hi,

Cast XMR version 1.0 is available.

Now CryptoNight Lite variants are supported. Lite coins like Aeon, IPBC and Turtle.

With the Lite algo higher hash rates can be achieved as it only uses an 1 MB scratchpad.

Following hash rates should be reachable.

RX Vega 56/64: 4250 Lite Hashes/s
RX 470/570/480/580: 1600 Lite Hashes/s

Use the --memset option to squeeze some extra hashes. It was enabled by default in the 0.9.7 version, now it is default disabled. It is probably only recommendable if a hash rate monitor is used to reset the GPU if an hash rate is drop is detected. Btw. from my observations the 18.3.4 drivers seem more resilient against hash rate drops then the legacy blockchain beta drivers.

Regards,
Glph3k

Cast XMR Version 1.0.0 (2018/4/24)

- Support for Aeon (AEON) CryptoNight Lite variant set --algo=3 to mine
- Support for Turtlecoin (TRTL) CryptoNightV7 Lite variant set --algo=4 to mine
- Support for Interplanetary Broadcast Coin (IPBC) CryptoNight Lite IPBC variation set --algo=5 to mine
- Up to 3% performance improvement with new option --maxmem to allocate the maximum memory of the card. For Vega cards the "HBCC Memory Segment" has to be disabled in the Radeon Settings to use the option. Disadvantage is a higher risk of hash rate drops when the --maxmem option is used.

Download Cast XMR 1.0.0 for Windows (64bit)

SHA256 hash of cast_xmr-vega-win64_100.zip:
fab141ce2b3e3b32636fedfc242e9b91edc21317e108fb361368570694dd338e

so, what's -tt? should I put number on [/tt]? or it will be automatic set once I put --maxmem? especially for vega 56

BroganBloodstone

full member

Activity: 322

Merit: 101

Quote from: rednoW on April 25, 2018, 06:41:02 AM

Quote from: carlosmonaco on April 25, 2018, 06:29:15 AM

I tried my best ^^ I'm using reference card 56 with 64 bios.
OverdriveNtool is not working with 18.3.4 and I can't run above 1090 even on old driver. ( this is the same for all my card (20 cards))

OverdriveNtool is working like a charm with newest drivers.
Here is a screen of my Sapphire Pulse Vega56 with shitty hynix mem mining cryptonight-heavy @ 140watt

Do you not find the lower power on P7 lowers your hashing?

zc133012

jr. member

Activity: 74

Merit: 1

oops，it is really difficult for me

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 43. (Read 206424 times)