Pages:
Author

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 57. (Read 206425 times)

full member
Activity: 280
Merit: 102
Please support Sumo/Heavy algo ASAP.  Stak is so unstable and their config files are a nightmare.

+1 for this. CastXMR is much more useable than XMR-STAK. Insane amount of profitability on the SumoKoin's cryptonight-heavy algorithm as of the past few hours. Seems like it was very effective in killing all those cryptonight ASICs.
Would you be so kind to elaborate how SumoKoin can be "so profitable" these days?

For my experience the pools (HASHVAULT, FAIRPOOL) I have tested are quite inefficent and delivers 10% less of the rate my miners are recording, where with other coins is not the case.
I assume the difficulty lately may have decreased or something like that, for Sumo being profitable.
Whattomine gives a very low profitability for Sumo.


At the moment I am mining, NiceHash, ETN and just began with TRTL which seems quite profitable. I have seen there are other coins that can give around 30% than Nicehash, but only for short period of times.
The time when 5 vegas were making 35 USD per day seems a very distant past...

If you have the time, I would appreciate your insight.


It was insanely profitable yesterday right when they switched the mining algorithm from simply cryptonight to cryptonight-heavy. Why? All the miners of sumokoin were ASICs and when the algo switch was done, they couldn't mine anymore. Only a handful of miners were left online allowing them to earn a boat load of what they would usually mine. Sadly the hash rate and difficulty of sumokoi has gone back up again.
newbie
Activity: 43
Merit: 0
I have an issue where my GPU1 (rx570) is only hashing ~60 h/s when the other cards are 700 - 770

GPU1 works fine on other miners.

I've tried with the monitor plugged in / not plugged in but the result is the same.

https://media.discordapp.net/attachments/344668220323528726/431018484365787136/unknown.png

Any ideas please.

more info of the HW please..

Yes I have tried rebooting.  I tried running via remote access, direct on the rig with and without monitor - nothing seems to fix it so far.  Any ideas?
jr. member
Activity: 330
Merit: 1
I have an issue where my GPU1 (rx570) is only hashing ~60 h/s when the other cards are 700 - 770

GPU1 works fine on other miners.

I've tried with the monitor plugged in / not plugged in but the result is the same.



Any ideas please.

Did you try rebooting the system? For me its the only solution that works when the hashrate goes down.
newbie
Activity: 301
Merit: 0
I have an issue where my GPU1 (rx570) is only hashing ~60 h/s when the other cards are 700 - 770

GPU1 works fine on other miners.

I've tried with the monitor plugged in / not plugged in but the result is the same.

https://media.discordapp.net/attachments/344668220323528726/431018484365787136/unknown.png

Any ideas please.

more info of the HW please..
newbie
Activity: 43
Merit: 0
I have an issue where my GPU1 (rx570) is only hashing ~60 h/s when the other cards are 700 - 770

GPU1 works fine on other miners.

I've tried with the monitor plugged in / not plugged in but the result is the same.

https://media.discordapp.net/attachments/344668220323528726/431018484365787136/unknown.png

Any ideas please.
member
Activity: 91
Merit: 29
I may of missed it but does the latest version not need any changes or switches on/off to enable V7? It will just carry on mining once the fork happens?

Hi,

for Monero the switch will happen automatically. It will be determined by the block version, which will switch to 7.

It will state "New Job received (CryptoNightV7)", note the V7, then you will know you are on the new fork.

1000 blocks to go...

Regards,
glph3k
newbie
Activity: 14
Merit: 0
I may of missed it but does the latest version not need any changes or switches on/off to enable V7? It will just carry on mining once the fork happens?
newbie
Activity: 2
Merit: 0
Will you be updating to support Cryptonight-Heavy implementation that SumoKoin just implemented in their fork?

I hope it will support the Cryptonight-Heavy implementation.

Hi,

CryptoNight-Heavy is used only by SumoKoin? Or are any other coins using or planning to use Heavy?

Regards,
glph3k


Haven (XHV) has already forked to Heavy. There is a good amount of miner interest in that coin right now.
member
Activity: 473
Merit: 18
Will you be updating to support Cryptonight-Heavy implementation that SumoKoin just implemented in their fork?

I hope it will support the Cryptonight-Heavy implementation.

Hi,

CryptoNight-Heavy is used only by SumoKoin? Or are any other coins using or planning to use Heavy?

Regards,
glph3k


Looks like they are the only ones for now. Possibly some other coins will also join

xmrig devs compiled a list of CN coins that change pow, might be useful to watch: https://github.com/xmrig/xmrig/issues/482
member
Activity: 91
Merit: 29
Will you be updating to support Cryptonight-Heavy implementation that SumoKoin just implemented in their fork?

I hope it will support the Cryptonight-Heavy implementation.

Hi,

CryptoNight-Heavy is used only by SumoKoin? Or are any other coins using or planning to use Heavy?

Regards,
glph3k
newbie
Activity: 4
Merit: 0
DEV!!!!! Can U make please update for cryptonight heavy - sumocoin Huh?
member
Activity: 176
Merit: 10
all my machines on win 10 now see the 0.9.2 exe file as virus:

Trojan:Win32/Bitrep.A
file: C:\Cast XMR\cast_xmr-vega.exe
Alert level: Severe
Category: Trojan

Windows defender automatically removes the file and crashes mining.

Happened almost simultaneously on all machines so probably windows pushed an update on windows defender.

same here...+ 0.92 is unable to reconnect pool after banned ip :/
newbie
Activity: 206
Merit: 0
Please support Sumo/Heavy algo ASAP.  Stak is so unstable and their config files are a nightmare.

+1 for this. CastXMR is much more useable than XMR-STAK. Insane amount of profitability on the SumoKoin's cryptonight-heavy algorithm as of the past few hours. Seems like it was very effective in killing all those cryptonight ASICs.
Would you be so kind to elaborate how SumoKoin can be "so profitable" these days?

For my experience the pools (HASHVAULT, FAIRPOOL) I have tested are quite inefficent and delivers 10% less of the rate my miners are recording, where with other coins is not the case.
I assume the difficulty lately may have decreased or something like that, for Sumo being profitable.
Whattomine gives a very low profitability for Sumo.


At the moment I am mining, NiceHash, ETN and just began with TRTL which seems quite profitable. I have seen there are other coins that can give around 30% than Nicehash, but only for short period of times.
The time when 5 vegas were making 35 USD per day seems a very distant past...

If you have the time, I would appreciate your insight.
newbie
Activity: 206
Merit: 0
In ver 0.9.2, my VEGAs 56 fan suddenly go above 4000rpm, even 4800rpm. WTF....
In ver 0.8 - 0.9 my vgas often go though 3500-3800rpm ....



https://i.imgur.com/HOxbZDg.png
here ...

Do you use OverdriveN Tool or Wattman? My fans are just 1200-1900 RPM with about 55-60C.

OverdriveN Tool, u should setup minimum fan 2500rpm.
WoW 1200/1900 only!
You obviously do not have the reference cards with just one blower...   Grin
Or... if you do have them, they may be sitting outside somewhere in Norway!
newbie
Activity: 154
Merit: 0
WE LOVE YOUR TOOL!!!
PLZ CONSIDER IPBC COIN NEW POW ALGO!!!
newbie
Activity: 154
Merit: 0
In ver 0.9.2, my VEGAs 56 fan suddenly go above 4000rpm, even 4800rpm. WTF....
In ver 0.8 - 0.9 my vgas often go though 3500-3800rpm ....



https://i.imgur.com/HOxbZDg.png
here ...

Do you use OverdriveN Tool or Wattman? My fans are just 1200-1900 RPM with about 55-60C.

OverdriveN Tool, u should setup minimum fan 2500rpm.
newbie
Activity: 35
Merit: 0
WE NEED CRYPTONIGHT-HEAVY .... GBU DEV THANKYOU FOR HARDWORKING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
full member
Activity: 262
Merit: 101
In ver 0.9.2, my VEGAs 56 fan suddenly go above 4000rpm, even 4800rpm. WTF....
In ver 0.8 - 0.9 my vgas often go though 3500-3800rpm ....




here ...

Do you use OverdriveN Tool or Wattman? My fans are just 1200-1900 RPM with about 55-60C.
newbie
Activity: 23
Merit: 3
all my machines on win 10 now see the 0.9.2 exe file as virus:

Trojan:Win32/Bitrep.A
file: C:\Cast XMR\cast_xmr-vega.exe
Alert level: Severe
Category: Trojan

Windows defender automatically removes the file and crashes mining.

Happened almost simultaneously on all machines so probably windows pushed an update on windows defender.
newbie
Activity: 38
Merit: 0
Will you be updating to support Cryptonight-Heavy implementation that SumoKoin just implemented in their fork?

I hope it will support the Cryptonight-Heavy implementation.
Pages:
Jump to: