[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 53.

P00P135

full member

Activity: 1126

Merit: 136

Quote from: MinerJLM on April 10, 2018, 05:04:08 PM

to mine to exchange wallet... i need put payment-id first ?
already mining for 8hours and nothing in my balance in exchange.

can someone send a full command line?

now im using: cast_xmr-vega -S xmr-eu1.nanopool.org:14444 -G 0,1,2,3 -u mywalletfromexchange.default %* "

"mywalletfromexchange" is adress and in "default" i put my payment id? its that?

The pool website has directions.

MinerJLM

newbie

Activity: 32

Merit: 0

to mine to exchange wallet... i need put payment-id first ?
already mining for 8hours and nothing in my balance in exchange.

can someone send a full command line?

now im using: cast_xmr-vega -S xmr-eu1.nanopool.org:14444 -G 0,1,2,3 -u mywalletfromexchange.default %* "

"mywalletfromexchange" is adress and in "default" i put my payment id? its that?

m4ssnet

newbie

Activity: 9

Merit: 0

Quote from: Fast_cris on April 10, 2018, 11:59:03 AM

hi...

I have 3 rx580 8g and 4 rx570 4g .... its working fine... but if i put the option --forcecompute ... give me this error in the picture.. can someone help me...

http://i67.tinypic.com/6p9j10.jpg

to me it work well the command --forcecompute (obviously set in compute mode in latest driver 18.3.4, have you installed this version ?)

HOW can you obtain ~1.4k from an rx580 ? Can you share settings for GPU/MEM frequency and voltage ?
I've had my settings from eth mining, but I reach something about ~830H/s on a rx 570 8gb nitro+ hynix (in eth I use the same settings for 580 and i obtain almost same hash).

Very curious about 1.4k !!! :-D

Fast_cris

newbie

Activity: 185

Merit: 0

Quote from: P00P135 on April 10, 2018, 12:07:23 PM

Quote from: Fast_cris on April 10, 2018, 11:59:03 AM

hi...

I have 3 rx580 8g and 4 rx570 4g .... its working fine... but if i put the option --forcecompute ... give me this error in the picture.. can someone help me...

http://i67.tinypic.com/6p9j10.jpg

Don't use forcecompute unless you are using latest AMD drivers.

i'm using the latest AMD drivers...

P00P135

full member

Activity: 1126

Merit: 136

Quote from: Fast_cris on April 10, 2018, 11:59:03 AM

hi...

I have 3 rx580 8g and 4 rx570 4g .... its working fine... but if i put the option --forcecompute ... give me this error in the picture.. can someone help me...

Don't use forcecompute unless you are using latest AMD drivers.

Fast_cris

newbie

Activity: 185

Merit: 0

hi...

I have 3 rx580 8g and 4 rx570 4g .... its working fine... but if i put the option --forcecompute ... give me this error in the picture.. can someone help me...

http://i67.tinypic.com/6p9j10.jpg

markos365

newbie

Activity: 6

Merit: 0

Quote from: glph3k on April 10, 2018, 02:25:37 AM

Quote from: arvonceda on April 09, 2018, 06:26:10 AM

sir... support haven and stellite pliss

Hi,

stelllite is support just use the option "--algo=1" to enforce CryptoNightV7, that is what they switched to.

Looking into CryptoNight Heavy for SUMO and Haven. But as stated earlier it will probably result in a new app. The changes from CryptoNight to Heavy are to hefty to be implemented efficient in one kernel. So stay tuned.

Regards,
glph3k

It would be great if it were a single app because of pools like moneroocean which mines Monero, Sumo and Electroneum (depending on current profitability) and then pay in XMR.

STT

legendary

Activity: 4102

Merit: 1454

Quote from: livada on April 10, 2018, 11:09:15 AM

Quote from: RIGED on April 09, 2018, 03:04:36 AM

I switched from Cast to Stak because dev is not quick enough with the new Sumokoin heavy algo as the latest update does not support

oh well 0%fee Stak will have to suffice

0% ? stack use 2% dev fee.

You find 0% dev fee xmr-stack? pls link me there or PM.
thx

i have vega 56
i use cast on XMR(v7) and HR is 1930
i use stak for SUMO (heavy) and HR is 1350.

This is ok for SUMO?

I believe some people self compile the code from github and remove or lower the dev fee from the ongoing process. Its possible they give a fixed donation and do not believe a percentage fee is fair for an entire farm of machines. Thats arguable but its not the first time I've heard that people mine with 0% fee daily in order to help their costs of revenue vs actual profit.

Fast_cris

newbie

Activity: 185

Merit: 0

it is possible change the intensite of mining?

livada

newbie

Activity: 417

Merit: 0

Quote from: RIGED on April 09, 2018, 03:04:36 AM

I switched from Cast to Stak because dev is not quick enough with the new Sumokoin heavy algo as the latest update does not support

oh well 0%fee Stak will have to suffice

0% ? stack use 2% dev fee.

You find 0% dev fee xmr-stack? pls link me there or PM.
thx

i have vega 56
i use cast on XMR(v7) and HR is 1930
i use stak for SUMO (heavy) and HR is 1350.

This is ok for SUMO?

arvonceda

newbie

Activity: 66

Merit: 0

Quote from: glph3k on April 10, 2018, 02:25:37 AM

Quote from: arvonceda on April 09, 2018, 06:26:10 AM

sir... support haven and stellite pliss

Hi,

stelllite is support just use the option "--algo=1" to enforce CryptoNightV7, that is what they switched to.

Looking into CryptoNight Heavy for SUMO and Haven. But as stated earlier it will probably result in a new app. The changes from CryptoNight to Heavy are to hefty to be implemented efficient in one kernel. So stay tuned.

Regards,
glph3k

still error socket sir

arvonceda

newbie

Activity: 66

Merit: 0

pluracoin not support
error socket

AlexanderDumas

newbie

Activity: 206

Merit: 0

Quote from: john1010 on April 09, 2018, 09:41:51 AM

Is this miner can increase the hashrate of 480/580 and 570 series of AMD? how about controlling the fan and set it in a good timing?

I can get around 875hs each on 3 of Gygabyte Gaming rx580 with 8gb Hynix.
I have red that those who have Samsung memory can get up to 1000hs.

Rewqpro

newbie

Activity: 53

Merit: 0

this miner is the best thing ever happened to mining world

duyquang06

newbie

Activity: 154

Merit: 0

Quote from: glph3k on April 10, 2018, 02:25:37 AM

Quote from: arvonceda on April 09, 2018, 06:26:10 AM

sir... support haven and stellite pliss

Hi,

stelllite is support just use the option "--algo=1" to enforce CryptoNightV7, that is what they switched to.

Looking into CryptoNight Heavy for SUMO and Haven. But as stated earlier it will probably result in a new app. The changes from CryptoNight to Heavy are to hefty to be implemented efficient in one kernel. So stay tuned.

Regards,
glph3k

Thank for reply and update !!!!

Any change for Cryptonight-UltraHeavy Embarrassed

Bhaal1

newbie

Activity: 80

Merit: 0

Quote from: glph3k on April 10, 2018, 02:25:37 AM

Quote from: arvonceda on April 09, 2018, 06:26:10 AM

sir... support haven and stellite pliss

Hi,

stelllite is support just use the option "--algo=1" to enforce CryptoNightV7, that is what they switched to.

Looking into CryptoNight Heavy for SUMO and Haven. But as stated earlier it will probably result in a new app. The changes from CryptoNight to Heavy are to hefty to be implemented efficient in one kernel. So stay tuned.

Regards,
glph3k

Thanks for the update and your work!

glph3k

member

Activity: 91

Merit: 29

Quote from: arvonceda on April 09, 2018, 06:26:10 AM

sir... support haven and stellite pliss

Hi,

stelllite is support just use the option "--algo=1" to enforce CryptoNightV7, that is what they switched to.

Looking into CryptoNight Heavy for SUMO and Haven. But as stated earlier it will probably result in a new app. The changes from CryptoNight to Heavy are to hefty to be implemented efficient in one kernel. So stay tuned.

Regards,
glph3k

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

This may have already been mentioned:

I was having issues with Cast not working on my RX 480 and RX 580 rigs with the Blockchain Driver. When I upgraded to the AMD Adrenaline 18.3.4, everything began to work fine. At least for now.

Simply thought I would give the heads up for those of you using RX 480 and RX 580 cards.

pel0v89

newbie

Activity: 7

Merit: 0

what pool can you offer guys ?

P00P135

full member

Activity: 1126

Merit: 136

Quote from: duyquang06 on April 09, 2018, 10:26:59 AM

Quote from: john1010 on April 09, 2018, 09:41:51 AM

Is this miner can increase the hashrate of 480/580 and 570 series of AMD? how about controlling the fan and set it in a good timing?

Good hashrate (but i think 99% optimize for VEGA series)
Can't controlling fan
Can't set good timining

You use Ntool for that.

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 53. (Read 206425 times)