[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 64.

tf2addict

full member

Activity: 675

Merit: 100

Quote from: glph3k on March 22, 2018, 08:04:43 AM

Quote from: tf2addict on March 22, 2018, 02:02:33 AM

Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty. Tried two different pools. Is something broken?

Use the option --algo=0 to force classic CryptoNight.

Graft reports that it is Version 7, the flag which Monero uses for the upcomming switch to their new CryptoNight variant.

Thanks, working ok now.

glph3k

member

Activity: 91

Merit: 29

Quote from: tf2addict on March 22, 2018, 02:02:33 AM

Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty. Tried two different pools. Is something broken?

Use the option --algo=0 to force classic CryptoNight.

Graft reports that it is Version 7, the flag which Monero uses for the upcomming switch to their new CryptoNight variant.

tf2addict

full member

Activity: 675

Merit: 100

Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty. Tried two different pools. Is something broken?

CryptoSouth

newbie

Activity: 63

Merit: 0

Is there any update on the development of this miner on Linux?

rbrcpa

copper member

Activity: 62

Merit: 1

Anybody having mass rejection issues using the latest version of Cast XMR with Nicehash?

It seems be to isolated to the cryptonight v7 shares that it finds but apparently at some point today the number of those shares its finding has increased a ton.

I’m using Cast XMR within Awesome Miner and for some reason when I use the -algo switch it just kills the miner. Not sure what I’m doing wrong but I wound up having to revert back to the oldest version.

I was using -algo 0 just like I use the -G switch for all of my GPU.

R0mi

full member

Activity: 305

Merit: 148

Theranos Coin - IoT + micro-blood arrays = Moon!

Quote from: micky123 on March 15, 2018, 08:43:05 AM

On a different note, does anyone know if there were blockchain drivers released for Sapphire Nitro Radeon RX480 after the August 2017 release? I can't seem to find any drivers post August 2017 and the August 2017 ones do not work, i used the DDU program and uninstalled the drivers, reinstalled the blockchain drivers, then added the patch too.... every time i do this process, the screen goes off and does not let me into normal mode, then i have to reboot into safe mode again, uninstall the drivers and come back out again! I am running windows 7, any idea what could be causing this?

Can't speak to Win7, but under Win 10, the latest Adrenaline drivers give excellent results for RX 480/570/580. General process is find and apply whatever memory strap improvement that matches the memory on your card, install latest AMD driver, immediately run amdpatcher.exe before restarting. That avoids the Window crashing on startup issues with latest Adrenaline drivers. *** Make sure you also enable "compute" mode in AMD Settings.

yondy12

newbie

Activity: 14

Merit: 0

anyone know why I got notify "socket error" when m mining at etn.spacepool , etn.fairhash? Huh

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: RandallPeltzer on March 19, 2018, 12:50:56 PM

I got an issue where the miner freezes and stays there until window is closed ...
what is funny is that the watt pulled from the wall does only decrese by around 20% of the max power ...

So a rig pulls around 1600 W ... 7 vega56 then freezes in a state where no more shares are hashed but pulls around 1300 W
still with out submitting any shares ...

Name=v1
GPU_P0=852;800
GPU_P1=991;900
GPU_P2=1138;950
GPU_P3=1269;1000
GPU_P4=1312;1050
GPU_P5=1474;1100
GPU_P6=1382;1100
GPU_P7=1432;1100
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=700;900
Mem_P3=945;950
Fan_Min=2400
Fan_Max=4900
Fan_Target=70
Fan_Acoustic=2400
Power_Temp=80
Power_Target=-7

Any help or suggestions?

My suggestion is to start downvolting first. I run my Vegas with 900/800 mV GPU/MEM (top clock values I use 1407/940) with target temp of 52 degrees. Some cards will do freezing as You described, so upping for 25mV GPU voltage and lowering MEM clock for steps of 5 will bring You to rock stable mining. And delete that -7 power target.

RandallPeltzer

newbie

Activity: 1

Merit: 0

I got an issue where the miner freezes and stays there until window is closed ...
what is funny is that the watt pulled from the wall does only decrese by around 20% of the max power ...

So a rig pulls around 1600 W ... 7 vega56 then freezes in a state where no more shares are hashed but pulls around 1300 W
still with out submitting any shares ...

Name=v1
GPU_P0=852;800
GPU_P1=991;900
GPU_P2=1138;950
GPU_P3=1269;1000
GPU_P4=1312;1050
GPU_P5=1474;1100
GPU_P6=1382;1100
GPU_P7=1432;1100
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=700;900
Mem_P3=945;950
Fan_Min=2400
Fan_Max=4900
Fan_Target=70
Fan_Acoustic=2400
Power_Temp=80
Power_Target=-7

Any help or suggestions?

micky123

legendary

Activity: 1022

Merit: 1005

Quote from: P00P135 on March 15, 2018, 10:35:44 AM

Quote from: micky123 on March 15, 2018, 08:43:05 AM

I am running windows 7

Update windows 10 and use windows 10 blockchain drivers, or you could try the hacked robinhood drivers i think they were win 7 compatible.

Whoa, so there is no native support for Windows 7? I thought they would support windows 7 and windows 10. Let me look around for the robinhood drivers and see if they suit my requirement. Not sure if i wanna go down the route of reinstalling the OS to get some hash rate increase. Thanks for the lead!

P00P135

full member

Activity: 1124

Merit: 136

Quote from: micky123 on March 15, 2018, 08:43:05 AM

I am running windows 7

Update windows 10 and use windows 10 blockchain drivers, or you could try the hacked robinhood drivers i think they were win 7 compatible.

micky123

legendary

Activity: 1022

Merit: 1005

On a different note, does anyone know if there were blockchain drivers released for Sapphire Nitro Radeon RX480 after the August 2017 release? I can't seem to find any drivers post August 2017 and the August 2017 ones do not work, i used the DDU program and uninstalled the drivers, reinstalled the blockchain drivers, then added the patch too.... every time i do this process, the screen goes off and does not let me into normal mode, then i have to reboot into safe mode again, uninstall the drivers and come back out again! I am running windows 7, any idea what could be causing this?

duyquang06

newbie

Activity: 154

Merit: 0

Quote from: bytiges on March 13, 2018, 04:29:31 AM

On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm on the same rig and same weather conditions.

Anyone noticed the same ?

Me switched from 0.8 to 0.9, have watt-a-kill, same power consume : D

tested on vega 56, 64.

commonorx

newbie

Activity: 99

Merit: 0

Quote from: glph3k on March 13, 2018, 02:48:31 PM

Quote from: bytiges on March 13, 2018, 04:29:31 AM

On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm on the same rig and same weather conditions.

Anyone noticed the same ?

The kernel for 'classic CryptoNight' did not change and is technical the same as in version 0.8.5 so a change in power consumption would be strange.

The CryptoNightV7 kernel is a little more complex but the additional instructions are still masked by the memory accesses and do have no real performance influence.

So if still running with classic CryptoNight the power consumption an therefore fan speed should be the same. For CryptoNight V7 a tiny increase would be explainable.

Regards,
glph3k

Any thoughts on NeoScrypt version for CAST? CAST NEOSCRYPT??

glph3k

member

Activity: 91

Merit: 29

Quote from: bytiges on March 13, 2018, 04:29:31 AM

On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm on the same rig and same weather conditions.

Anyone noticed the same ?

The kernel for 'classic CryptoNight' did not change and is technical the same as in version 0.8.5 so a change in power consumption would be strange.

The CryptoNightV7 kernel is a little more complex but the additional instructions are still masked by the memory accesses and do have no real performance influence.

So if still running with classic CryptoNight the power consumption an therefore fan speed should be the same. For CryptoNight V7 a tiny increase would be explainable.

Regards,
glph3k

bytiges

full member

Activity: 196

Merit: 100

On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm on the same rig and same weather conditions.

Anyone noticed the same ?

bytiges

full member

Activity: 196

Merit: 100

Quote from: visten on March 11, 2018, 03:01:42 PM

Aren't here some pros who actually know about that stuff?

'I noticed that the majority of all my and other questions from people are just ignored and no one replies to those at all....

Are there actually forums where I would actually get an answer to those questions and others?! Hardly anyone ever helped me on this forum...

I don't mean to be harsh on you, but want to give you an insight.

The stuff you're asking about is very basic. It's been discussed extensively on the forums and the "pros" are tired of answering newbies that don't want to do their homework properly.

So, unless you can contribute something interesting or new, there's little chance that a "pro" will babysit you and hold your hand in. You need to put some effort into whatever you're doing.

HTH

P00P135

full member

Activity: 1124

Merit: 136

Quote from: murgorx on March 12, 2018, 02:56:43 PM

Guys, could you please tell me why this miner is not recognizing my cards? It's just detecting the first one and it hashes a lot slower, than a different cryptonight miner. Can anyone tell me how to troubleshoot this issue?
And if you could also tell me what's -cclock for this algo on rx580 should be, that would be awesome Cheesy

Thanks

Read the readme and some posts. its easy to figure out.

murgorx

member

Activity: 443

Merit: 13

Guys, could you please tell me why this miner is not recognizing my cards? It's just detecting the first one and it hashes a lot slower, than a different cryptonight miner. Can anyone tell me how to troubleshoot this issue?
And if you could also tell me what's -cclock for this algo on rx580 should be, that would be awesome Cheesy

Thanks

visten

newbie

Activity: 23

Merit: 0

Thx

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 64. (Read 206404 times)