Can you mine bitcore at yiimp to a cryptopia generated wallet address??
Should work. Did you try it?
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 355. (Read 2347659 times)
Should work. Did you try it?
The other odd thing is it starts mining before all the cards are set. Its almost like once the mining starts on 1 cards its super slow to start the others.
I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?
any ideas?
Doesn't work properly if you have more than 4 cards and a 2 core processor.
Use ccminer 2.0
ccminerAlexis78.exe works great Do note that on mining rigs with multiple GPUs you might need to increase the amount of virtual memory (SWAP file) if you have less system memory in order to be able to run the miner with the default high intensity. On a 6x GTX 1070 GPUs mining rig with 8GB RAM we’ve had to increase the virtual memory to 24GB in order to be able to run the miner properly at the default intensity
"on my 6x1070 rigs i only run 2gb ram and have Virtual Mem set to 32-40gb it runs perfect... i monitor cpu usage my g1820t hardly goes over 50%usage dualcore @2.4ghz...." tip- use a ssd not hdd
Thank you. I'll try tht now. I had 16-32GB, changed to 32-48gb.
I'm runnning 7x1080s
I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?
any ideas?
Doesn't work properly if you have more than 4 cards and a 2 core processor.
Use ccminer 2.0
ccminerAlexis78.exe works great Do note that on mining rigs with multiple GPUs you might need to increase the amount of virtual memory (SWAP file) if you have less system memory in order to be able to run the miner with the default high intensity. On a 6x GTX 1070 GPUs mining rig with 8GB RAM we’ve had to increase the virtual memory to 30GB in order to be able to run the miner properly at the default intensity
"on my 6x1070 rigs i only run 2gb ram and have Virtual Mem set to 32-40gb it runs perfect... i monitor cpu usage my g1820t hardly goes over 50%usage dualcore @2.4ghz...." tip- use a ssd not hdd
Can you mine bitcore at yiimp to a cryptopia generated wallet address??
I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?
any ideas?
Doesn't work properly if you have more than 4 cards and a 2 core processor.
Use ccminer 2.0
bitcore increase difficulty everyday, seems like just few days left for profitable mining.
I think I can make a 30% faster miner, but waiting until the coin is listed on a proper exchange like bittrex or poloniex.. Might sell the mod with sourcecode and increase the price to 0.2BTC. Linux support, fewer buyers, more profit for the buyers.
someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot
I only used 970 minis (so higher power than 1070) but never again. Super loud, throttles a lot and slower even without termal throttling.
i only run the 1070 mini itx they are great i get exactly the same hash per watt as the G1 gaming just make sure there have plenty of cold air flow ! only 1 single 90mm fan but they do work well i run @115-120watts so thermal throttle is not a issue for me , they are the cheapest version of the 1070 in my country by $50 per card add's up when you buy 14 card : ) im buying another 6 soon as they seem to be going out of stock my local store said they only have whats on hand they are not ordering anymore.... im not sure if there is a refreshed version coming soon to replace them....
note: i dont use kfa2 mini oc i use GV-N1070IXOC-8GD http://www.gigabyte.com/Graphics-Card/GV-N1070IXOC-8GD#kf
I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?
any ideas?
someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot
I only used 970 minis (so higher power than 1070) but never again. Super loud, throttles a lot and slower even without termal throttling.
bitcore increase difficulty everyday, seems like just few days left for profitable mining.
not like bitcore, last time i mined nexus i made only 9 blocks a day with two rig, a block is 0.0045 btc total = 0.04 a day
but the next day i made something like 1 block in 8 hours...
but the next day i made something like 1 block in 8 hours...
Mining Nexus is very profitable at the current pricelevels..
Nexus sp-mod #6 stable private miner (0.05 btc)
Nexus sp-mod #6 stable private miner (0.05 btc)
bensam instead of batfile you can use autoit script very very easy and useful for unattended mining operations
Yeah, I'd like to stick to batfiles if possible.
someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot
Don't touch mini coolers with a 10 foot pole. Only thing those are good for is self-immolation and miniPCs. Bigger is very much better for mining.
bensam instead of batfile you can use autoit script very very easy and useful for unattended mining operations
someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot
Just found a block for yiimp ))
With my custom build miner
Cheers!
With my custom build miner
Cheers!
When running batfiles does anyone know how to make the batfile check for a running process and then restart it if it isn't present? I know how to have it restarts processes on a regular basis, but I don't want it to restart if it is already there.
Yeah, there is not a stable official version yet.
I've ported tpruvot's changes from the linux branch and built the Windows binary and now I get a different (sporadic) error.
Still needs some optimizations but at least it works kinda, sorta.
I've ported tpruvot's changes from the linux branch and built the Windows binary and now I get a different (sporadic) error.
Still needs some optimizations but at least it works kinda, sorta.
THE PALGIN BUILD CRASHES--
I have GTX 750ti cards and GTX 960 cards running on AMD CPUs, 8GB RAM, Win 7 x64. I have built SGminer from source on my Linux box, and it runs on RX 470 cards at about 1/10 the speed of a working CCminer build on a GTX 960.
When I get a build that works, I might run it for the money. My RX 470 cards do better on ZEC. --scryptr
Oops, forgot to mention, built only for sm_52 and sm_61 cards (9xx and 10xx), as I said, quick and dirty, no optimisations, no bugtracking, tested on several rigs running 1060, 1070 and 970 onboard, all seems OK
Tpruvot added support in linux branch, I just did the same for windows build, no viruses, you can build from source by yourself.
EDIT: added test build for Compute Capability 3.0 cards on GitHub
THE "UNROLLED" RELEASE RUNS--
But it is not perfectly stable. It crashed on my GTX 960 rig just before I began to type this post. All my cards are sm_52, but the first sm_30 build and the "unrolled" build seem to hash well.
Apparently, an GTX 750ti mining with CCminer hashes the same speed as an RX 470 (3+MH/s) mining with the SGminer software. A GTX 960 is perhaps twice as fast as a GTX 750ti. The hash rate reported at console matches well with the hash rate reported poolside. This is true with both the CCminer build from Palgin, and the SGminer build from bitbandi.
Nice to have a more reliable build at hand. I will watch your GitHub. --scryptr
Jump to: