Yup, it's not well balanced at all. It goes back and forth. Usually you just end up worse hashrate overall.
If it's really that easy SP, it shouldn't be that hard for you to make it work properly. I can run both at the same time. Add a compatibility mode to the Dcr miner so I can run it alongside Genoils without problems.
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 659. (Read 2347641 times)
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
You just need to remove some blocking synch code from the binary. You can do it in a hex editor
TWO SIMULTANEOUS MINERS-
I tried it, Genoil's miner running with a Decred miner. It worked, but not well. Genoil's miner would run in spurts with zero hash, then in spurts with full or nearly full hash rate. The Decred miner would work at a slower hash rate. It seemed awkward, and not really working well. I don't know where the blocking code is to remove it, either.
As I have said in the past, I used to run 2 instances of CudaMiner simultaneously. It worked well, like running 2 threads in CGminer or SGminer. If one miner crashed, the other would pick up the hash rate.
Miners would pay for a well co-ordinated dual miner. --scryptr
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
You just need to remove some blocking synch code from the binary. You can do it in a hex editor
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
Just run the decred private #9 with -i 26. Works ok on the 980ti. doesn't work on the 970
Hence why we need a actual dual miner. I tried this months ago.
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
Just run the decred private #9 with -i 26. Works ok on the 980ti. doesn't work on the 970
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.
Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
Dual mining is actually far from hot. Red or green.
-edit- ok it is hot with red.
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
SP was making one then stopped. I think Genoil is contemplating it, but hasn't done it yet. No one is collaborating to make it easier.
Not sure why, it's a hot item miners are willing to pay for either in BTC or in a fee.
Just had a quick look. 70% of the time is lost in the cuda_streborg.cu. I managed to remove 10% pretty quickly. Sib is x11+streborg.
so it's possible in the end to double the hash?, even 4MH would be a good achieve, but would put the coin at less profit than etheruem or around thatI think it is possible.
Just had a quick look. 70% of the time is lost in the cuda_streborg.cu. I managed to remove 10% pretty quickly. Sib is x11+streborg.
so it's possible in the end to double the hash? even 4MH would be a good achieve, but would put the coin at less profit than etheruem or around that
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
REPORTEDLY, YES--
There is apparently a very private nVidia dual miner already in existence. It is in use only by the coder that wrote it. The coder has retired, and is awaiting only the passage of tme until ascending to coder heaven, like the Lawnmower Man.
Does that ring a bell? -scryptr
is there any efforts to make a dual GPU miner for nvidia like claymore for dcr and eth
Just had a quick look. 70% of the time is lost in the cuda_streborg.cu. I managed to remove 10% pretty quickly. Sib is x11+streborg.
sp you need to optimize the sib algo, i would pay for it, it would be on par with spreadcoin with profit, maybe even more
i know that a 970 can reach 5M on that algo, currently 2.5
i know that a 970 can reach 5M on that algo, currently 2.5
I have 6 private miners for the people who donate (donators will get updates).
1. 0.1BTC: Pentablake +100-120% (3 releases)
2. 0.1BTC: Cryptonight +10% (one release)
3. 0.1BTC: Spreadcoin +10-26% (with full sourcecode / linux compatible) (9 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (6 releases)(x11,x13,x14,x15,x17,nist5,quark,skein,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (9 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (6 releases)
Sp-Mod #5 ( All nicehash algos optimized) default intensities hashrates in MHASH/s. (980ti 1290 coreclock/1650 memclock) faster than ccminer 1.7.5 cuda 7.5 32 build
nist5: 43.80 (+17%)
quark: 27.85 (+61,91%)
lyra2v2 16.10 (+16.6%)
x11: 12.85 (+18%)
x13: 10.27 (+19.97)
x15: 8.83 (+18.52 )
neoscrypt: 0.99 (+73.68%)
The most profitable private kernal today is spreadcoin.
1. 0.1BTC: Pentablake +100-120% (3 releases)
2. 0.1BTC: Cryptonight +10% (one release)
3. 0.1BTC: Spreadcoin +10-26% (with full sourcecode / linux compatible) (9 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (6 releases)(x11,x13,x14,x15,x17,nist5,quark,skein,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (9 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (6 releases)
Sp-Mod #5 ( All nicehash algos optimized) default intensities hashrates in MHASH/s. (980ti 1290 coreclock/1650 memclock) faster than ccminer 1.7.5 cuda 7.5 32 build
nist5: 43.80 (+17%)
quark: 27.85 (+61,91%)
lyra2v2 16.10 (+16.6%)
x11: 12.85 (+18%)
x13: 10.27 (+19.97)
x15: 8.83 (+18.52 )
neoscrypt: 0.99 (+73.68%)
The most profitable private kernal today is spreadcoin.
what speeds private miner for 750Ti ?
The Linux system is how to set the NVIDIA graphics card fan speed, who can help me? thank you。 
COOL-BITS--
This is accomplished by setting COOL-BITS=28, which allows setting clock speeds and fan speeds. That is the short of it. Somewhere back in this thread there is more detailed information, and the Cool-Bits2 Scrypt. The scrypt (a BASH scrypt) allows for command line regulation of fans. If you do a search on Cool-Bits, and Cool-Bits2 scrypt, you should find it
It is also possible to regulate fans from the Desktop GUI if Cool-Bits=28 is set. I would have to find the stuff (again), but it is searchable. I have the scrypt printed out in a binder. If you can't find it on your own, I'll dig it out for you. --scryptr
nvidia-settings has fan and clock control in the GUI when coolbits are set. There's lots of info available on the net if
you search coolbits. There are some tricks to get it working on a GPU with no minitor attached but they are documented
also.
thank you
The Linux system is how to set the NVIDIA graphics card fan speed, who can help me? thank you。
COOL-BITS--
This is accomplished by setting COOL-BITS=28, which allows setting clock speeds and fan speeds. That is the short of it. Somewhere back in this thread there is more detailed information, and the Cool-Bits2 Scrypt. The scrypt (a BASH scrypt) allows for command line regulation of fans. If you do a search on Cool-Bits, and Cool-Bits2 scrypt, you should find it
It is also possible to regulate fans from the Desktop GUI if Cool-Bits=28 is set. I would have to find the stuff (again), but it is searchable. I have the scrypt printed out in a binder. If you can't find it on your own, I'll dig it out for you. --scryptr
thank you
The Linux system is how to set the NVIDIA graphics card fan speed, who can help me? thank you。
COOL-BITS--
This is accomplished by setting COOL-BITS=28, which allows setting clock speeds and fan speeds. That is the short of it. Somewhere back in this thread there is more detailed information, and the Cool-Bits2 Scrypt. The scrypt (a BASH scrypt) allows for command line regulation of fans. If you do a search on Cool-Bits, and Cool-Bits2 scrypt, you should find it
It is also possible to regulate fans from the Desktop GUI if Cool-Bits=28 is set. I would have to find the stuff (again), but it is searchable. I have the scrypt printed out in a binder. If you can't find it on your own, I'll dig it out for you. --scryptr
nvidia-settings has fan and clock control in the GUI when coolbits are set. There's lots of info available on the net if
you search coolbits. There are some tricks to get it working on a GPU with no minitor attached but they are documented
also.
sp do you have a sib private algo?
Jump to: