uptime on router 8 hrs, still running and uses very little resources. 3.8.5.
What router model and what firmware if you wouldn't mind sharing. 
Topic: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT - page 2. (Read 77138 times)
I have an Asus RT N16 with ddwrt and a 5GH/s BFL miner.
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
Well that should work OK. You don't need to worry about libusb though, cgminer is statically compiled.
To run straight from the cmd line, you may need to reset the library path:
unset LD_LIBRARY_PATH
unset LD_PRELOAD
I tried unsetting the path and after running cgminer it prints out the semwait error then exits.
No difference when I run: service cgminer start.
This is what I get when listing the usb devices:
root@DD-WRT:~# ls -l /dev/usb/tts/
total 0
crw------- 1 root root 188, 0 Jan 1 1970 0
Any ideas about what's wrong?
uptime on router 8 hrs, still running and uses very little resources. 3.8.5.
I have an Asus RT N16 with ddwrt and a 5GH/s BFL miner.
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
Well that should work OK. You don't need to worry about libusb though, cgminer is statically compiled.
To run straight from the cmd line, you may need to reset the library path:
unset LD_LIBRARY_PATH
unset LD_PRELOAD
I have an Asus RT N16 with ddwrt and a 5GH/s BFL miner.
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
I'm following the instructions posted at
http://pastebin.com/hwgm3kEe and
https://109.201.133.195/index.php?topic=76685.msg3911947
When starting cgminer I get:
root@DD-WRT:/opt# cgminer
[2013-12-12 05:41:53] Started cgminer 3.8.5
[2013-12-12 05:41:53] Failed to sem_wait errno=89 cgsem=0x0x5061c8 in usbutils.c usb_resource_thread():3651
Not sure if I set up the usb libs properly, here is what I have
root@DD-WRT:/opt/lib# ls | grep libusb
libusb-0.1.so.4
libusb-0.1.so.4.4.4
libusb-1.0.so
libusb-1.0.so.0
libusb-1.0.so.0.1.0
libusb.so
root@DD-WRT:/opt/lib# ls -lR . | grep ^l
lrwxrwxrwx 1 root root 19 Dec 12 05:55 libusb-0.1.so.4 -> libusb-0.1.so.4.4.4
lrwxrwxrwx 1 root root 19 Dec 12 05:24 libusb-1.0.so -> libusb-1.0.so.0.1.0
lrwxrwxrwx 1 root root 19 Dec 12 04:31 libusb-1.0.so.0 -> libusb-1.0.so.0.1.0
Any ideas what could be the problem?
OK, here it is:
https://www.dropbox.com/s/4oik0ecfezclq9u/cgminer_3.8.5_mipsel.ipk
Working for me right now.
https://www.dropbox.com/s/4oik0ecfezclq9u/cgminer_3.8.5_mipsel.ipk
Working for me right now.
Installed and seems to be running. I'll report on it after 24 hours have passed.
Oh boy, Guess what? 
It seems like at least it's TRYING to work but something hitches, Back to 3.6.3 and restarting every ~24 hours.
Code:
[2013-12-10 15:47:55] Started cgminer 3.8.5
[2013-12-10 15:47:57] Probing for an alive pool
[2013-12-10 15:47:58] Pool 0 difficulty changed to 2
[2013-12-10 15:47:59] Network diff set to 908M
[2013-12-10 15:49:18] AMU 5 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 2 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 4 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 3 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:50:45] AMU 5 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2013-12-10 15:50:45] AMU5: Comms error (werr=-5 amt=0)
[2013-12-10 15:50:45] AMU 5 failure, disabling!
(5s):883.3M (avg):1.253Gh/s | A:0 R:0 HW:0 WU:0.0/m
It tries to mine, but 1 second after Network Diff shows up it all goes green(as in all the LED's on my BE's turn green)[2013-12-10 15:47:57] Probing for an alive pool
[2013-12-10 15:47:58] Pool 0 difficulty changed to 2
[2013-12-10 15:47:59] Network diff set to 908M
[2013-12-10 15:49:18] AMU 5 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 2 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 4 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:49:18] AMU 3 SendWork usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2013-12-10 15:50:45] AMU 5 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
[2013-12-10 15:50:45] AMU5: Comms error (werr=-5 amt=0)
[2013-12-10 15:50:45] AMU 5 failure, disabling!
(5s):883.3M (avg):1.253Gh/s | A:0 R:0 HW:0 WU:0.0/m
It seems like at least it's TRYING to work but something hitches, Back to 3.6.3 and restarting every ~24 hours.
OK, here it is:
https://www.dropbox.com/s/4oik0ecfezclq9u/cgminer_3.8.5_mipsel.ipk
Working for me right now.
https://www.dropbox.com/s/4oik0ecfezclq9u/cgminer_3.8.5_mipsel.ipk
Working for me right now.
Thanks for all the effort you do Con, and Thanks for compiling these Shep. Whenever you get to 3.8.5 I'll give it a go again.
Also I ment 3.6.3 in the last post, Which has been stable sense I upgraded my firmware and reinstalled Optware fresh and will stay that way I hope.
Also I ment 3.6.3 in the last post, Which has been stable sense I upgraded my firmware and reinstalled Optware fresh and will stay that way I hope.
Boo 
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED
Back to 3.6.1 again.
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED
Back to 3.6.1 again.
I rolled back to 3.6.3 per P_Shep's suggestion. I have had no problems since. Hopefully ckolivas can figure out what's going on with the newer versions. I tested 3.7.x & 3.8.x versions but could not get them to detect my BFL MiniRig SC.
Oh great, Thanks Con. 
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED
I know what this is likely to be. Fixed in git, version 3.8.5 cgminer, when it's out, should have it fixed.
Yeah, seems 3.6.3 is the last one which works. It's the one I've left running since I haven't had any problems and needed to upgrade.
Boo
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED
Back to 3.6.1 again.
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED
Back to 3.6.1 again.
Upped to 3.8.3:
https://www.dropbox.com/s/j5zxk6bwovp7t50/cgminer_3.8.3_mipsel.ipk
Another 'Rpi only' device was added in the last version which I shouldn't have enabled. Removed that now. Can't say if there's be no AMU errors though.
https://www.dropbox.com/s/j5zxk6bwovp7t50/cgminer_3.8.3_mipsel.ipk
Another 'Rpi only' device was added in the last version which I shouldn't have enabled. Removed that now. Can't say if there's be no AMU errors though.
Spits out a bunch of errors out for me.
along with this after it finishes spitting out the errors.
Code:
[2013-11-17 23:00:38] AMU 0 SendWork usb write err:(-12) LIBUSB_ERROR_NOT_SUPPORTED
Code:
[2013-11-17 22:51:49] Started cgminer 3.8.1
modprobe: module i2c-dev not found in modules.dep
[2013-11-17 22:51:51] BlackArrowBitFuryGPIO failed to modprobe i2c-dev (256) - you need to be root?
[2013-11-17 22:51:51] No devices detected!
[2013-11-17 22:51:51] Waiting for USB hotplug devices or press q to quit
[2013-11-17 22:51:51] Probing for an alive pool
[2013-11-17 22:51:52] Pool 0 difficulty changed to 2
[2013-11-17 22:51:53] Network diff set to 609M
(5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m
Upped to 3.8.1
https://www.dropbox.com/s/i8eze451k2obtgc/cgminer_3.8.1_mipsel.ipk
I've left off the pre/post inst scripts so it works on asuswrt.
https://www.dropbox.com/s/i8eze451k2obtgc/cgminer_3.8.1_mipsel.ipk
I've left off the pre/post inst scripts so it works on asuswrt.
Had an error installing the new update.
Code:
Upgrading cgminer on /opt/ from 3.6.3 to 3.7.2...
sh: /opt/ipkg-rIrXPj/cgminer-d2hl3D/preinst: not found
preinst script returned status 127
An error ocurred, return value: 1.
Collected errors:
Aborting installation of cgminer
come on anyone ?
Ask Con. This isn't the place for that.
Jump to: