CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT - page 4.

nitrox

member

Activity: 136

Merit: 10

tester

i get cgminer_3.6.3_mipsel.ipk working normal.
i changed openwrt with dd-wrt.

now can't start API.
i add to my cgminer.conf

Code:

"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:192.168.1.0/24"

but i get only this on miner.php:

Code:

Error getting device list: ERR: socket connect(0) failed

any ideas to fix it

OtaconEmmerich

full member

Activity: 235

Merit: 100

Ick, Just got a(-7) LIBUSB_ERROR_TIMEOUT loop for the second time in a row tonight. Which means I have to restart the router to get it all going again. I updated to 3.6.3 not long ago, but why are errors showing up a day or so later? I wonder if that Seg fault I got a day ago mattered..

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

hmm, wonder why you're missing that.
Anyway, I think you can just change all instances of optlog to 'echo'.

nitrox

member

Activity: 136

Merit: 10

tester

help.
when start cgminer show this message

/opt/etc/init.d/S99cgminer: /opt/etc/init.d/S99cgminer: 50: optlog: not found

and cgminer stop working , i use cgminer_3.6.3_mipsel.ipk

later I'll try older version

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Upped to 3.6.3

https://www.dropbox.com/s/h3hsknaf1fdw2rk/cgminer_3.6.3_mipsel.ipk

All working with my 6 BFL SC singles

CPU usage on the RT-N16 is around 10% for everything (cgminer + OS + whatever else is running).
Total power consumption of that lot is about 1560W

(Remember: Hot-plugging does not work. Have to restart cgminer to find new units.)

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

With a swap drive it might, but you'd be pushing it some.

OtaconEmmerich

full member

Activity: 235

Merit: 100

Hmm, tempted to get get this going on my ASUS WL-520gU now. The million dollar question is, is 16MB of RAM enough? my N16 is using 43MB right now.

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Yeah, I should add the caveat... no hot-plugging! the OS/kernel just doesn't support it.

OtaconEmmerich

full member

Activity: 235

Merit: 100

I tried again, Running fine now on all 6 BE's. I think Hotplugging or User error(I had a bunch of instances of screen running because I'm stupid) caused the error. Gunna let it run all night now. Good work on the new code ckolivas.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: OtaconEmmerich on October 15, 2013, 01:27:41 AM

Updated my cgminer, Got it on a different hub with just one BE right now. It's running smooth so far, I'll check it in 30 minutes and add another BE. This version of CGminer may have fixed the timeout issues I had before. I may try this on my tablet later on and see if that fixes I had on that too. Very promising.

Update: Added another BE, Spat out LIBUSB errors after a while. Fun.

Which libusb errors?

OtaconEmmerich

full member

Activity: 235

Merit: 100

Updated my cgminer, Got it on a different hub with just one BE right now. It's running smooth so far, I'll check it in 30 minutes and add another BE. This version of CGminer may have fixed the timeout issues I had before. I may try this on my tablet later on and see if that fixes I had on that too. Very promising.

Update: Added another BE, Spat out LIBUSB errors after a while. Fun.

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

upped to 3.6.1

https://www.dropbox.com/s/jpbd37zj6kswkri/cgminer_3.6.1_mipsel.ipk

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Got the bastard to compile and run... maybe even work? Dunno, have no hardware to test with.

https://www.dropbox.com/s/pf1e1zmbrsndsnn/cgminer_3.5.1_mipsel.ipk

OtaconEmmerich

full member

Activity: 235

Merit: 100

Quote from: P_Shep on October 10, 2013, 09:11:09 AM

Out of curiosity, what mining hardware do you use?

6 Block Eruptors on a Rosewill HUB.

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Out of curiosity, what mining hardware do you use?

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Quote from: OtaconEmmerich on October 10, 2013, 07:26:20 AM

"service cgminer on" nor "service cgminer start" doesn't work, I edited the cgminer.conf beforehand. I can't even get the services command to list anything. I think that's the DD-WRT only feature. I have no clue how it's handled in the ASUSWRT-Merlin firmware.

Edit:Got CGminer running at least, GETRESULTS TIME OUT ERRORS. FFFFFFF- I GIVE UP.

I guess I'll just have to live with 5-7$ higher power bills for another month at least.

Ah yeah, service is a optware the right way thing.

Probably best give up. Not a lot I can do about that error.

OtaconEmmerich

full member

Activity: 235

Merit: 100

"service cgminer on" nor "service cgminer start" doesn't work, I edited the cgminer.conf beforehand. I can't even get the services command to list anything. I think that's the DD-WRT only feature. I have no clue how it's handled in the ASUSWRT-Merlin firmware.

Edit:Got CGminer running at least, GETRESULTS TIME OUT ERRORS. FFFFFFF- I GIVE UP.

I guess I'll just have to live with 5-7$ higher power bills for another month at least.

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

edit /opt/et/cgminer.conf

type:
service cgminer on
service cgminer start

OtaconEmmerich

full member

Activity: 235

Merit: 100

SUCCESS! That file copied perfectly to the OPT folder and installed without errors!

...Now the question is how do i set this up properly now..

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

wget will use ssl when it needs to if you install wget-ssl

I've tried using entware, but doesn't really work for me. Seems to have the same failings at optware, with the added bonus of not having all the support and nice scripts.

Using the flash drive to transfer the file is fine, ipkg will copy it to a temp dir, the 'ipkg-zWCaj2/cgminer-7gGXKd'

I'll up-load the non-script version, because for some reason it doesn't work with asuswrt, and I have absolutely no idea why... neither does google. Just means you should manually shut down and start up the cgminer service when updating.

https://www.dropbox.com/s/dwj0tmj89v4c27d/cgminer_3.3.4-1_mipsel.ipk

Topic: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT - page 4. (Read 77138 times)